Unisteer 8001120-01 User Manual
1965-Early 1967 Manual Mustang Install Manual
8001110-01 & 8001120-01
Full refund will NOT be granted to any kits that are damaged,
scratched, or altered in any fashion.
*ALTHOUGH THIS KIT IS FAIRLY SIMPLE TO INSTALL, SOME MODIFICATIONS
MAY BE NECESSARY.
*BEFORE STARTING INSTALLATION, PLEASE BE AWARE OF THE
MODIFICATIONS THAT ARE NEEDED TO INSTALL.
*BEFORE STARTING BE AWARE OF THE MODIFICATIONS NEEDED.
*DUE TO VARIABLES OUTSIDE OUR CONTROL THESE KITS MAY NOT FIT ALL
APPLICATIONS. ALSO, PLEASE VERIFY KIT WILL FIT YOUR APPLICATION
BEFORE ALTERING VEHICLE.
pg. 1 655850
#
Part Number
Description
Quantity
1a
8001160-01
65-66 Rack and pinion unit with bracket
1
1b
8001080-01
67 Rack and pinion unit with bracket
1
2
8050440
9/16”-30 x 9/16”-30 U-Joint
1
3
8050230
9/16”-26 x ¾”-DD U-Joint
1
4
200860
7/16” Flat washer
2
5
200150
½” Internal star washer
2
6
231120
½” Bolts 1 ½” long
2
7
120330
M16x2.0 Wheel nut
1
8
205770
Column bushing assembly
1
9
231130
Screw 1/4x14 x ¾”
3
10
480260
Thrust bearing ¾”x 1 3/8”
1
11
8021270
Column bracket
1
12
205720
Column gasket
1
13
130330
Clamp
1
14
8021320
Outer end with large taper
2
15
543740
Column shaft
1
16
8021330
Outer end with small taper
2
17
544840
Shaft 10.38” 9/16-30 spline
1
2 3 4 5 7 9 8
10
11
Kit Contents:
pg. 2 655850
1965-Early 1967 Manual Mustang Install Manual
1. Remove center horn pad from steering wheel.
2. Remove steering wheel center nut and remove steering wheel assembly. Note a puller may be
required to remove wheel.
3. From under dash remove the bolts that retain the column tube to the dash. Remove the 3 screws at
firewall where the column goes through and remove retainer plate.
pg. 3 655850
Loading...