UNISENSE HYDROGEN SENSOR User Manual

1

HYDROGEN SENSOR USER MANUAL

Hydrogen sensor user manual

Copyright © 2016· Unisense A/S

Version December 2016

HYDROGEN SENSOR USER MANUAL

UNISENSE A/S

TABLE OF CONTENTS

WARRANTY AND LIABILITY...................................................6

CONGRATULATIONS WITH YOUR NEW PRODUCT!............................7

Support, ordering, and contact information 7

OVERVIEW ...................................................................9

GETTING STARTED .........................................................10

unpacking a new SenSor 10
polarization 10
connecting the microSenSor 10
pre-polarization 10
calibration 11

Hydrogen reading 11

MEASUREMENTS............................................................14

mounting of the SenSorS 14
electrical noiSe 14
interference 15

ADVANCED USE ............................................................16

STORAGE AND MAINTENANCE..............................................17

cleaning the SenSor 17

REFERENCES ................................................................18

TROUBLE SHOOTING........................................................19

6

notice to purchaSer

This product is for research use only. Not for use in human diagnostic

or therapeutic procedures.

warning

Microsensors have very pointed tips and must be handled with care to

avoid personal injury and only by trained personnel.

Unisense A/S recommends users to attend instruction courses to

ensure proper use of the products.

warranty and liability

The Hydrogen sensor is covered by a 90 days limited warranty.

Microsensors are a consumable. Unisense will only replace

dysfunctional sensors if they have been tested according with the

instructions in the manual within 14 days of receipt of the sensor(s).

The warranty does not include repair or replacement necessitated by

accident, neglect, misuse, unauthorized repair, or modification of the

product. In no event will Unisense A/S be liable for any direct, indirect,

consequential or incidental damages, including lost profits, or for any

claim by any third party, arising out of the use, the results of use, or the

inability to use this product.

Unisense mechanical and electronic laboratory instruments must

only be used under normal laboratory conditions in a dry and clean

environment. Unisense assumes no liability for damages on laboratory

instruments due to unintended field use or exposure to dust, humidity

or corrosive environments.

repair or adjuStment

Sensors and electrodes cannot be repaired. Equipment that is not

covered by the warranty will, if possible, be repaired by Unisense A/S

with appropriate charges paid by the customer. In case of return of

equipment please contact us for return authorization.

For further information please see the document General Terms of Sale

and Delivery of Unisense A/S as well as the manuals for the respective

products.

WARRANTY AND LIABILITY

77

support, ordering, and contact information

The Hydrogen microsensor is a miniturized sensor for measuring

partial pressure of H

2

in the micromolar range.

If you wish to order additional products or if you encounter any

problems and need scientific/technical assistance, please do not

hesitate to contact our sales and support team. We will respond

to your inquiry within one working day.

E-mail: [e-mail]

Unisense A/S

Tueager 1

DK-8200 Aarhus N, Denmark

Tel: [phone]

Fax: [phone]

Further documentation and support is available at our website

www.unisense.com.

CONGRATULATIONS WITH YOUR NEW PRODUCT!

REPLACEMENT OF SENSORS

Unisense will replace sensors that have been damaged during shipment provided that:

• The sensors were tested immediately upon receipt in accordance with the delivery note

and the manual

• The seal is still intact.

• The sensors are returned to Unisense for inspection within two weeks.

• The sensors are correctly packed for return to Unisense, in accordance with the note

included in the sensor box.

8

RECOMMENDED AMPLIFIERS

One-channel amplifier: Microsensor Monometer

Multi-channel amplifiers: Microsensor Multimeter