Unipro 3004A Quick Manual

Quick Guide

Unipro Laptimer

3004A

Version 1.00

Go faster faster

UNIPRO ApS

VIBORG HOVEDVEJ 24

DK-7100 VEJLE

DENMARK

Tel.: [phone]
Fax: [phone]

www.uniprolaptimer.com

[e-mail]

Introduction.............................................................................................................................3

Get ready to go!......................................................................................................................4

Do you have the necessary accessories?...........................................................................................4

Installation............................................................................................................................................5

Display unit ............................................................................................................... 5

Main box ................................................................................................................... 5

RPM sensor................................................................................................................ 8

Receivers .................................................................................................................. 8

AMB Loop receiver ..................................................................................................................................... 8

Magnet receiver......................................................................................................................................... 9

Infrared receiver........................................................................................................................................ 9

Wheel sensor kit........................................................................................................10

The sensor disc.........................................................................................................................................10

The wheel sensor ......................................................................................................................................11

Basic functions and setup..................................................................................................................12

Display buttons .........................................................................................................12

Receiver type ...........................................................................................................................................13

Stripe setup .............................................................................................................................................13

Magnet count ...........................................................................................................................................13

Magnet delay............................................................................................................................................14

More settings............................................................................................................................................14

Practice and race using the basic functions......................................................................15

Operating modes...............................................................................................................................15

First lap mode...........................................................................................................15

Running mode...........................................................................................................16

Pit mode ..................................................................................................................16

Clear all laps.............................................................................................................17

Take advantage of the advanced features..........................................................................17

Measure and set the wheel circumference ....................................................................................................17

Analyse your data..............................................................................................................................17

Data Analyser ...........................................................................................................18

Transferring data from the Laptimer to the Data Analyser is easy....................................................................18

UNIPRO – The original Laptimer 2

Introduction

Thank you for trusting us to deliver the most advanced Laptimer on the market.
The Unipro Laptimer has several unique features and will measure every piece of information with
a speed and accuracy you have only dreamt about! It really enables you to use your Laptimer as a
tool to go faster, faster.

We did all we could to make your investment as future proof as possible and you should be able to
enjoy it in many years to come. With the unique possibility to expand it later, with accessories like
Data Analyser, printer and speed kit, your investment is even safer.

If you have a special request either for new accessories or for a new feature, please let us know.
We constantly try to develop our products with the most useful features so you can use the
Laptimer to go faster, faster but we always appreciate good ideas from the users of our products.

If you have any problems or questions regarding your Unipro Laptimer we will make sure to give
you the necessary support.

Please e-mail your questions to

Good luck on the tracks!

UNIPRO ApS
Viborg Hovedvej 24
DK-7100 Vejle
Denmark
Web:
E-mail: [e-mail]

www.uniprolaptimer.com

[e-mail] or contact your local dealer.

UNIPRO – The original Laptimer 3

Get ready to go!

In this chapter, we will give you the most necessary information about what to do before you can
start using your Laptimer. If you are an experienced user, looking for exact information, you may
want to jump to the reference manual.

Do you have the necessary accessories?

If you have bought the basic package you should have following parts to your Laptimer:

Main Box

RPM Sensor

You may also have bought any of these extra accessories:

Speed Kit

Display Unit

Receiver – Loop, Magnet or IR

UNIPRO – The original Laptimer 4

Installation

Your Laptimer is a precision instrument and you should take the necessary time to ensure correct
installation. A basic rule is to start from the sensors and go back to the Laptimer, never the other
way. If cables are too long, they should always be looped at the end near the Laptimer. Use
plenty of strips to fix the cables to the frame.

DISPLAY UNIT

The Display Unit is mounted on the steering wheel. Due to the ultra thin Display Unit, you will not
have any problems with regulations.

Metal washer

Rubber washer

Rubber washer

Figure 1. Display unit mounted on steering wheel

First, the Display Unit is mounted on the steering
wheel. Choose a hole that gives a good placement at the

top of the steering wheel. On some steering wheels, it is
necessary to make the hole a little bigger.
Remove the nut, the gray washer and one of the two
black rubber washers. These parts are mounted on the
back side of the steering wheel, as shown in figure 1.

Nut

Gray washer

Steering wheel

Display unit

It is important to keep the right order of the washers.
Please follow this sequence:
Nut – metal washer – gray plastic washer – black rubber
washer – steering wheel – black rubber washer – Display
Unit.

Tighten the nut when the display is strait and centered in the
steering wheel. This picture shows the correct mounted
Display Unit.

MAIN BOX

The main box is mounted behind the front cover. The following picture is showing the main box
and its components.

UNIPRO – The original Laptimer 5

p

Screw with washer

Figure 2. Main Box with fittings

Front cover

Vibration dam

er

Main box

The main Box is mounted behind the front cover.

First, a 6.5 mm hole is drilled in the cover. Some karts have a
recess in the coat suitable for drilling the hole in. If you press h
on the sticker, you can see where to drill the hole. It is a good
idea to look from the back before drilling!

ard

Use the enclosed umbracho screw
The enclosed screw is screwed through the front coat to
ease the mounting of the main box. Use a 5 mm
umbracho.

UNIPRO – The original Laptimer 6