Unipoe PM3022GSNL-330 V2, P6-S12GL User Manual

User Guide

16-Port Gigabit +4G UTP+2G SFP PoE Switch with LCD Display

- 1 -

Package Contents

Check the following contents of your package:



PoE Switch x 1



User Guide x1



Power Cord x1



Accessories(Rack Mount Accessory Kit*2 ,Rubber Feet*4, screw*8)

If any part is lost and damaged, please contact your local agent immediately.

Introduction

16-Port Gigabit +4G UTP+2G SFP PoE switch is 16-port 10/100/1000Mbps PoE RJ45 and 4*10/100/1000 RJ45 Uplink Port

with 2 Gigabit SFP Slots. The PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered

Devices (PD). The electrical power and data transmission on the same cable can expand your network to the places where

no power lines or outlets, where you can install devices such as APs, IP cameras, or IP phones etc.

The PoE Switch provides a simple, cost effective, and non-blocking wire-speed performance with 19-inch metal shape for

rack deployment in office or department network application.

Hardware Description

Front Panel

The Front Panel Consists of Ethernet Ports. The LCD and LED indicators are also located on the panel.

PoE Status

The PoE Switch is with the function of the LCD display and PoE. The LCD can display the working condition of PoE port not

only, still can accurately show the state of each port, such as: Output power, Overload, Short circuit, Light load, Low voltage,

Over voltage,High temperature, and so on...