M312G
M312A
UNION SPECIAL CARPET STRIP CUTTING MACHINE M312G
FOR CARPET BORDER EDGING
The machine has a
equipped with 4 revolving cutting blades. The machine comes factory adjusted with a distance of the blades on each of the drive shafts of 60, 70 and 80 mm (different dimensions on request). The lower shaft has clearance cuts for the knives which are spaced 5
mm apart.
Equipped with a maintenance free motor 230/400V / 3 ph / 50 c/s, 0.37 kW. Safety
switch if Plexiglas cover is opened. Foot switch, control lamp indicating "ready for operation".
Dimensions: approx. 900 x 400 x 400 mm. Weight: 79 kg.
Advantages:
Change of cutting width within each of the 3 knife drive shafts without any tools.
•
Knife drive shafts can be easily removed for re-sharpening or for changing the dimen-
•
sions between the blades for different cutting width.
Cutting blades made out of high quality steel, dia 102 mm. Increase of knife life due to
•
cutting without a counter shear blade. Suitable for all known carpet types.
High cutting productivity of up to 26 m/min (depending on carpet material).
•
Start/Stop by foot switch.
•
Two pull-out support arms, approx. 400 mm long, allow easier handling of wider carpet
•
pieces.
Cutting Machine M312A
Same as M312G, but single phase motor 230V / 50 c/s, 0.37 kW.
rotating carrier
for 3 cutting blade drive shafts. Each drive shaft is
Union Special GmbH
Raiffeisenstraße 3
D-71696 Möglingen
03-2000 en