Page 1
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have
come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below :
PART LIST
DESCRIPTION
ITEM
QTY
1
2
5 DRAWER CHEST
BUN FOOT
1PC
4PCS
4
DESCRIPTION
ITEM
QTY
A
B
C
D
HEX NUT
M8
SPRING WASHER
5/16 x 19mm
WRENCH
FLAT WASHER
5/16 x 22mm
8pcs
8pcs
8pcs
1pc
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast and easy assembly.
!
WARNING !
1. Don't attempt to repair or modify parts that the broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
STEP 1
ASSEMBLY INSTRUCTION
DESCRIPTION : 5 DRAWER CHEST
1
Bun Foot's Box
COVER WITH FLAT &
SOFT SURFACE
2
2
2
2
1
3
TIPPING
RESTRAINT
1set
ASSEMBLY HARDWARE PACK
TO REMOVE THE DRAWER TO INSTALL THE DRAWER
PULL THE DRAWER OUT UNTIL IT STOPS.
WITH A RATHER FORCEFUL PULL CONTINUE
TO PULL THE DRAWER OUT.
ALIGN THE CENTER GUIDE ON THE DRAWER AND CASE WITH SOME
FORCE PUSH THE DRAWER INTO THE CASE.
STEP 2
D A B C
Affix to wall
behind
Chest
3
WALL
Loading...