Page 1
Thank you for purchasing our product.
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2
Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or
.
padded area, in the room that it is intended for. Approx assembly time: 30 minutes.
3
Please do not use any tools other than those provided or recommended in these instructions.
.
.
Please do not throw away any of the packaging or the instruction until you have checked all the components
4
and hardware and the furniture is fully assembled.
.
5
Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that has been provided.
6.Please keep all small pieces out of reach of children.
Hardw
are:
OLT M8 x 80
A
JCBB B
4 PCS
Compenen
1 - x 1HEADBOARD CUSHION
2 - x 1
3 - x 1HEADBOARD MIDDLE RAIL
4 - x 1
5 - x 1
6 - x 1HEADBOARD LEG (R)
7 - x 1SIDERAIL (L)
8 - x 1
9 - x 1FOOTBOARD LEG(L)
10 - x 1
11 - x 3
12 - x 1CENTER SUPPORT
13 - x 1
14 - x 13
t :
HEAADBOARD TOP RAIL
HEADBOARD RAIL
HEADBOARD LEG (L)
SIDERAIL (R)
FOOTBOARD LEG(R)
SUPPORT LEG
FOOTBOARD RAIL
BED SLAT
B
C
D
E
F
G
H
I
J
K
L
M
N
14
5
4
7
9
13
12
JCBC BOLT M6 X 70
JCBC BOLT M6 X 60
JCBC BOLT M6 X 50
JCBC BOLT M6 X 40
WOOD DOWEL M10 X 40mm
U WASHER
SCREW M4 X 32mm
WOOD
DJUSTER
A
BARREL NUT
PRING WASHER M5
S
FLA
T WASHER M5
LLEN KEY (BALL SHAPE) M4
A
ALLEN
KEY M5
2
3
8
10
PCS
4
2 PCS
14 PCS
2 PCS
4 PCS
2 PCS
10 PCS
3 PCS
4 PCS
4 PCS
8 PCS
1 PC
1 PC
1
6
11
Page 1/4
Page 2
STEP 1
:
. Attac
1
h the Headboard Leg(L)(5) and Headboard Leg(R)(6)as per diagram shown . Place JCBC bolt 60MM(C) and tighten by
using M4 Allen Key(M). Then Insert JCBCbolt 40MM(E) and tighten byM4 Allen Key(N).
2
e the Footboard Leg(L)(9) and Footboard Leg(R)(10) as per picture shown and attach JCBC bolt 50MM(D) and tighten
. Plac
using M4 Allen Key(M).
C
Ex2 Cx2
Hardware & Tool required
Hardware & Tool required
STEP 2:
1.Place Headboard (1) and Side rail (L)(7) Side rail (R)(8) on a carpeted or padded area as shown. Attach Side rail (L)(7) Side rail (R)(8) into
Headboard (1) and by using JCBB 80mm Bolt (A),Spring Washer(K) into the preholes Headboard (1) and Footboard(2) as per diagram. Tighten
with M5 Allen Key (N).
2. Insert JCBC M6x70(B),Barrel Nut(J) as per diagram shown and tighten with M4 Allen Key(M) to all 4 side bed corner.
. Attac
3
h Headborad Guardrail(3 ) into Headbord(1) then insert JCBC Bolt 50mm(D),Flat Washer 2mm(L) and tighten by using M4 Allen Key(M)
Mx1
Dx4
Ax4 B
x4 Jx4
Hardware & Tool required
Dx4 Mx1Lx4
Kx4 Nx1
Pag
e 2/4
Page 3
STEP 3:
Place Headboard Rail(2) as diagram shown. Attach M10x40MM(F) and JCBC Bolt 50MM(D), U Washer (G) and tighten until 50%
with M4 Allen Key (M). Repeat for another side.
Dx2
Hardware & Tool required
Hardware & Tool required
STEP 4:
h the Center Support (12) to the hinges as per diagram shown. Repeat again at Footboard(2).
1. Attac
2.Attach the Adjuster(J) to the three support leg(11).
3. Attach the Support Leg(11) to the Center support (12) as shown in diagram.
Fx4
Gx2
Mx1
12
11
Ix3
Hardware & Tool required
11
11
Pag
e 3/4
Page 4
:
STEP 5
Attach Slat (14) into bed by inserting CSK screw (H) into the predrilled holes on the Slat (14) . Tighten with Screwdriver (Not
provided) .
Scre
wdriver (Not provided) .
14
Hx10
Hardware & Tool required
Hardware & Tool required
STEP 6:
. Attac
1
h the Headboard (1) as shown in diagram. Place the JCBC bolt 50MM(D), Flat Washer(L) and tighten by using M4 Allen Key(M). Repeat
again at 3 another hole.
Dx4
Lx4
Hardware & Tool required
Mx1
mbly is completed. The bed is ready to enjoy now!
Asse
Pag
e 4/4
Page 5
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2
Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or
.
padded area, in the room that it is intended for. Approx assembly time: 30 minutes.
3
Please do not use any tools other than those provided or recommended in these instructions.
.
.
Please do not throw away any of the packaging or the instruction until you have checked all the components
4
and hardware and the furniture is fully assembled.
.
5
Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that has been provided.
6.Please keep all small pieces out of reach of children.
Hard
ware:
BB BOLT M8 x 80
A
JC
4 PC
S
nent :
Compe
1 - x 1HEADBOARD CUSHION
2 - x 1
HEAADBOARD TOP RAIL
3 - x 1HEADBOARD MIDDLE RAIL
4 - x 1
HEADBOARD RAIL
5 - x 1
HEADBOARD LEG (L)
6 - x 1HEADBOARD LEG (R)
7 - x 1SIDERAIL (L)
8 - x 1
SIDERAIL (R)
9 - x 1FOOTBOARD LEG(L)
10 - x 1
FOOTBOARD LEG(R)
11 - x 3
SUPPORT LEG
12 - x 1CENTER SUPPORT
13 - x 1
FOOTBOARD RAIL
14 - x 13
BED SLAT
B
C
D
E
F
G
H
I
J
K
L
M
N
14
5
4
7
9
13
12
JCBC BOLT M6 X 70
JCBC BOLT M6 X 60
JCBC BOLT M6 X 50
JCBC BOLT M6 X 40
WOOD DOWEL M10 X 40mm
U WASHER
SCREW M4 X 32mm
WOOD
ADJUSTER
BARREL NUT
SPRING WASHER M5
FLAT WASHER M5
ALLEN KEY (BALL SHAPE) M4
A
LLEN KEY M5
2
3
8
10
4 PCS
2 PCS
14 PCS
2 PCS
4 PCS
2 PCS
S
10 PC
3 PCS
S
4 PC
4 PC
S
S
8 PC
1 PC
1 PC
1
6
11
Page 1/4
Page 6
STEP 1
:
. Attac
1
h the Headboard Leg(L)(5) and Headboard Leg(R)(6)as per diagram shown . Place JCBC bolt 60MM(C) and tighten by
using M4 Allen Key(M). Then Insert JCBCbolt 40MM(E) and tighten byM4 Allen Key(N).
2
e the Footboard Leg(L)(9) and Footboard Leg(R)(10) as per picture shown and attach JCBC bolt 50MM(D) and tighten
. Plac
using M4 Allen Key(M).
C
Ex2 Cx2
Hardware & Tool required
Hardware & Tool required
STEP 2:
1.Place Headboard (1) and Side rail (L)(7) Side rail (R)(8) on a carpeted or padded area as shown. Attach Side rail (L)(7) Side rail (R)(8) into
Headboard (1) and by using JCBB 80mm Bolt (A),Spring Washer(K) into the preholes Headboard (1) and Footboard(2) as per diagram. Tighten
with M5 Allen Key (N).
2. Insert JCBC M6x70(B),Barrel Nut(J) as per diagram shown and tighten with M4 Allen Key(M) to all 4 side bed corner.
. Attac
3
h Headborad Guardrail(3 ) into Headbord(1) then insert JCBC Bolt 50mm(D),Flat Washer 2mm(L) and tighten by using M4 Allen Key(M)
Mx1
Dx4
Ax4 B
x4 Jx4
Hardware & Tool required
Dx4 Mx1Lx4
Kx4 Nx1
Pag
e 2/4
Page 7
STEP 3:
Place Headboard Rail(2) as diagram shown. Attach M10x40MM(F) and JCBC Bolt 50MM(D), U Washer (G) and tighten until 50%
with M4 Allen Key (M). Repeat for another side.
Dx2
Hardware & Tool required
Hardware & Tool required
STEP 4:
h the Center Support (12) to the hinges as per diagram shown. Repeat again at Footboard(2).
1. Attac
2.Attach the Adjuster(J) to the three support leg(11).
3. Attach the Support Leg(11) to the Center support (12) as shown in diagram.
Fx4
Gx2
Mx1
12
11
Ix3
Hardware & Tool required
11
11
Pag
e 3/4
Page 8
:
STEP 5
Attach Slat (14) into bed by inserting CSK screw (H) into the predrilled holes on the Slat (14) . Tighten with Screwdriver (Not
provided) .
Scre
wdriver (Not provided) .
14
Hx10
Hardware & Tool required
Hardware & Tool required
STEP 6:
. Attac
1
h the Headboard (1) as shown in diagram. Place the JCBC bolt 50MM(D), Flat Washer(L) and tighten by using M4 Allen Key(M). Repeat
again at 3 another hole.
Dx4
Lx4
Hardware & Tool required
Mx1
mbly is completed. The bed is ready to enjoy now!
Asse
Pag
e 4/4
Loading...