Page 1
Caution : You must read this before you proceed
TV BOARD
Parts List
A
Wooden Cabinet
1
B
Metal Leg
2
Assembly Instructions
Lable
Picture
Description
Qty
Page 1
Page 2
Assembly Preparation
④
Screwdriver
(not provided)
1
Before
Beginning
Assembly:
①
②
Washer
7
Bolt
6.0X20.0 mm
7
③
Allen Key
1
Lable
Picture
Description
Qty
Hardware
Page 2
Page 3
Overview
With help of your adult partner, carefully stand the wooden cabinet:
1.1 Put out the door and dissemble the handle with the help of screw
driver (④).
1.2 Install the handle on the drawer with the help of screwdriver (④) as
picture above.
Repeat the above step to put handle for the door also.
This Tv Board has multiple parts and may require up to some 30
minutes to assemble. The above picture is to help you in putting
various parts into perspective. Please read through the instructions
below to familiarise yourself with the parts and steps before assembly.
Assembly Steps
Step 1
Page 3
Page 4
Step 2
With assistance from your adult partner, place the Wooden Cabinet (A)
face down as picture, on a clean, non-marring surface. As shown in
“Step 2" picture attach Metal Leg (B) to Wooden Cabinet (A) using
Washers (①), Bolt (②) with Allen Key (③).
Tighten the Bolt fully in a sequential manner.
Repeat the same process to assembly remaining leg (B)
Step 3
Flip the Tv Borad as Shown in "Step 3"
Page 4
Page 5
Care & Maintenance
In case if the floor is uneven, adjust levellers on the underside of the
legs up or down to compensate.
Once the Tv Board is assembled, the levellers can be adjusted turning
the knob as shown in the "Step 4".
This Tv Borad is now ready to use.
Caution : This Tv Board can only be used on flat, level surface.
Step 4
Page 5
Loading...