Page 1
Important safety instructions:
Please carefully read all instructions before assembling the lounge.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Remove all parts and hardware from box along with any plastic protective packaging.
a
b
c
d
e
f
g
h
i
j
Page 2
Assembly Procedures:
Step 1. Assemble the lounge on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Open the bottom covering of seat cushion (B), then attach the seat cushion (B) to the back cushion (A) as shown
below. Securely tighten all bolts with Allen wrench (e).
B
A
Step 2. Attach left leg (D) to the assembled back cushion (A) and seat cushion (B) as shown below. securely
tighten the bolts with Allen wrench (e).
A
D
Dowel
B
Page 3
Step 3.
1) Insert back top rail (E) and back stretcher (F) to the left leg (D) according to the label "E" and "F" on the back
top rail, back stretcher.
2) Loosely Attach right leg (C) to the assembled back cushion (A), seat cushion (B), back top rail (E) and back
stretcher (F) as shown below. Securely tighten all bolts with Allen wrench (e) .
F
Step 4.
1) Attach "L" Bracket (j) to the back top rail (E), back stretcher (F), right leg (C) and left leg (D) as shown below.
Securely tighten the bolts with Allen wrench (i).
2) Turn the assembled lounge to an upright position. Assembly is complete.
(f)x8
(g)x8
(h)x8
(i)x1
(j)x4
Loading...