Union Community FMD10-BLE User Manual
Copyright 2014 Union Community Co., LTD.
FMD10-BLE User Guide
Version eng-1.06
FMD10 User Guide
Seoul, Songpa-gu, Bangi-dong 44-3 Hyundai Topics Bldg 9F (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.virditech.com
<Revision History>
Version
Date
Description
Firmware Version
1.00
2014-08-06
Initial Release
10.61.00-000.16
1.01
2014-08-07
Changed default values
1.06
2015-10-19
FMD10-BLE changes
20.62.00-000
< Glossary >
Admin, Administrator
- As a user who can enter into the terminal menu mode, he can register/modify/delete
terminal users and change the operating environment by changing settings.
- If there is no administrator for a terminal, anyone can change the settings, so it is
recommended to register at least one administrator.
- Caution is required with registration and operation because an administrator has the
right to change critical environmental settings of the fingerprint recognition unit.
Authentication Method
- Various Kinds of authentication including FP (fingerprint) authentication, RF (Card)
authentication, or a combination of these methods.
Ex) Card or FP: Card or fingerprint is used for authentication.
Bell Button
- Used to activate a bell/device/door phone that is externally connected to the device.
FMD10 User Guide
Seoul, Songpa-gu, Bangi-dong 44-3 Hyundai Topics Bldg 9F (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.virditech.com
Table of Contents
<Revision History> ................................................................................................... 2
< Glossary > .............................................................................................................. 2
Table of Contents ..................................................................................................... 3
1. Read Before Using ............................................................................................... 4
1.1. Safety precautions ...................................................................................... 4
1.2. Specification ................................................................................................ 5
1.3. Device description ....................................................................................... 6
1.4. LED operation .............................................................................................. 6
1.5. Door Bell Key Operation ............................................................................. 7
1.6. Buzzer sound during operation .................................................................. 7
1.7. Correct fingerprint registration and input methods ................................. 7
2. Introduction .......................................................................................................... 9
2.1. Description ................................................................................................... 9
2.2. Features ....................................................................................................... 9
2.2. Configuration ............................................................................................. 10
2.2.1. Standalone Configuration ................................................................... 10
3. Environment Settings ........................................................................................ 11
3.1. Parameters ................................................................................................. 11
4. How to use the terminal ..................................................................................... 13
4.2. Authentication ........................................................................................... 13
4.2.1. Fingerprint authentication ................................................................... 13
4.2.2. Card authentication ............................................................................ 13
4.2.3. Successful Authentication ................................................................ ... 13
4.2.4. Door Bell Operation ............................................................................ 13
FMD10 User Guide
Seoul, Songpa-gu, Bangi-dong 44-3 Hyundai Topics Bldg 9F (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.virditech.com
1. Read Before Using
1.1. Safety precautions
Warning
Handling with wet hands or
allowing liquid to flow into it
is not advised.
-> it may cause an electric
shock or damage.
Do not place a fire source
near the unit.
It may cause a fire.
Do not disassemble, repair,
or modify the unit.
-> It may cause an electric
shock, fire or damage.
Keep out of reach of
children.
-> It may cause an
accident or damage.
- If the above warnings are ignored, it may result in death or serious injury.
Cautions
Keep away from direct
sunlight
-> It may cause
deformation or color
change.
Avoid high humidity or
dust
-> The unit may be
damaged.
Avoid using water,
benzene, thinner, or alcohol
for cleaning
-> It may cause an electric
shock or fire.
Do not place a magnet
close to the unit.
-> The unit may break
down or malfunction.
Do not contaminate the
fingerprint input area.
-> Fingerprints may not be
well recognized.
Avoid using insecticides
or flammable sprays near
the unit.
-> It may result in
deformation or color
change.
Avoid impacts or using
sharp objects on the unit.
-> The unit may be
damaged and broken.
Avoid severe temperature
changes.
-> The unit may be
broken.
- If the above cautions are ignored, it may result in property loss or human injury.
※ Under no circumstances will Union Community be responsible for accidents or damages
caused by inappropriate use of the product caused by not referring to the user manual.
FMD10 User Guide
Seoul, Songpa-gu, Bangi-dong 44-3 Hyundai Topics Bldg 9F (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.virditech.com
1.2. Specification
ITEM
SPEC
REMARK
CPU
32Bit RISC CPU(400MHz)
RTC
CPU RTC / Lithium Battery
Time/Date for Logs
Bell Key
Capacitive Touch Sensor
Activate Bell Output
LED
3 Colors (Red, Green, Blue)
Buzzer
Audible feedback buzzer
MEMORY
64M SDRAM
4M NOR Flash
1,000 User
(1,000 Finger)
Fingerprint Sensor
Optical
Authentication Speed
<1 sec.
Scan Area / Resolution
13.2 * 15.2 mm / 500 DPI
260*300
FRR / FAR
0.1% / 0.001%
Temperature /
Humidity
Operating Current
Standby: 80mA
Maximum: 250mA
AC / DC Adapter
INPUT : Universal AC 100 ~ 250V
OUTPUT : DC 12V
UL, CSA, CE Approved
Communication Port
Bluetooth: Bluetooth v2.1 + EDR
Class 2 Output Power
B-UNIS Smartphone
application
RS-485
BLC015/LC010
Wiegand Out
Standard 26/34 bit
Wiegand
Lock
Lock Normally Closed/Open
Door Lock
Monitoring
M0, M1 Inputs
Door monitoring
Inside Open
IO
Exit Button Input
Bell Output
Bell A/B
Max Current = 60mA
Door phone/bell
output
Card Reader
125KHz RF (optional)
13.56MHz SC
SIZE
72mm * 111mm * 41.4mm
Loading...