Uninet iColor 550 Quick Start Manual
1. Unpack the machine, check all
components and remove
the orange tape from all sides.
Then open the top lid.
3. Using the provided USB drive, install the driver.
Only connect the Printer to the PC when prompted to by the software.
4. There are three possible configurations of the iColor 550. These coincide with the ‘Print Queues’ in the iColor ProRIP (Step 13).
Quick Start Guide
for the iColor 550
5. Install the iColor ProRIP (stored on the provided drive)
2. Remove the white toner cartridge. Remove protective foam from inside
the machine and protective film from the white cartridge and reinstall.
Refer to the User Manual for selecting the appropriate driver.
Yellow
Magenta
Cyan
REAR
FRONT
White/Clear
Spot Color
Overprinting
Black
Yellow
Magenta
Cyan
REAR
FRONT
Standard CMYK
Printing
White/Clear
Yellow
Magenta
Cyan
REAR
FRONT
Spot Color
Underprinting
sales@icolorprint.com www.icolorprint.com
After the iColor ProRIP installation is complete, the setup will begin. Internet connection is required.
For detailed instructions please refer to the iColor 550 Printer User Manual and the iColor ProRIP User Manual
6. Confirm first time setup. And click ‘OK’. 7. Click “Install Printer”. 8. Choose the iColor 550 and click ‘OK’.
9. To install the Print Queues click ‘Next’. 10. Setup is now complete.
11. Open the iColor ProRIP and click Queue/Manage Queues.
14. To load a file, click the green icon in the menu bar. Then
choose the desired file. After, click the ‘Print’ icon in the menu bar.
13. Select your ‘Print Que’ and ‘Print Mode’. The ‘Print Modes’ have
preset values for white coverage, choke, paper size, paper tray and
mirror settings. These can be modified as needed.
12. In the ‘Port’ drop down menu, choose the port,
and click ‘Close’.
sales@icolorprint.com www.icolorprint.com
Print Queues
Print Mode
Please note, the preview icon of the printer should match the physical configuration of the printer.
Loading...