Unimax MF127, DSS125 User Manual

???

??????

WARRANTY CARD

Product: SAW BLADE AND DRILL SHARPENING MACHINE MF 127

Type:

DSS125

Date of manufacture:

Date of sale, stamp, signature:

Serial number (product series):

Repair centre notes:

Without the correctly filled warranty card or without proof of purchase receipt, including

the product type (invoice, purchase receipt) no warranty claim will be processed.

1. KH Trading machines and tools are covered by 6/24 months warranty, starting on the date of
purchase, as described in the Civil Code (proof of purchase or invoice receipt must be
enclosed with the warranty card when making a claim).

2. This warranty does not cover defects caused by unprofessional handling, machine overloads, not
complying with instructions contained in this manual, using accessories that are not approved,
unauthorized repair, regular wear and tear and damages occurred during transport. Further, this
warranty does not cover parts and accessories such as the motor, carbon brushes, seals and
hot-air operated parts and parts that need to be changed regularly.

3. If the repair is to be found as not covered by the warranty policy, all costs including the repair and ship­ping to and from the repair centre will be paid by the customer, according to valid price list. See www.

4. When making a claim, you must present the warranty card, showing the date of the purchase, the
serial number of the machine, vendor stamp and signature of sales clerk, as well as the proof of
purchase receipt.

5. Warranty claim shall be made at the vendor shop where you bought your machine or you may mail
it to a service centre. The vendor is obligated to fill out the warranty card (date of sale, serial
number, vendor stamp and signature). All these information must be filled in at the time of sale.

6. The warranty period will be extended for the period of time for which the machine has been in the
service centre possession. If the repair or defect is not covered by the warranty policy, all costs including
the repair and shipping will be paid by the owner of the machine / tool. We recommend sending the
machine in its original packaging. Please, also enclose brief description of the defect with the packaging.

7. Before sending the machine for repair, clean it thoroughly. If the received machine is dirty, it may
be rejected by the service shop or you may be charged a cleaning fee.

SERVICE

Logistic centre Klecany

Topolová 483

250 67 Klecany

Czech Republic

Claim department phone number: 266 190 156 T-mobile: [phone]

266 190 111 O2: 601 218 255
Fax: [phone] Vodafone: 608 227 255
http://www.KHnet.cz
Email: [e-mail]

SS AA WW BB LL AA DD EE AA NN DD DD RR II LL LL
SS HH AA RR PP EE NN IINN GG MMAA CC HH II NN EE

MM FF 11 22 77

USER'S MANUAL

DSS125

2

Dear customer. Thank you for purchasing equipment from KH Trading, s.r.o.
Our company is ready to offer you our services - before, during and after you buy our product.
If you have any question, comment or idea, please contact our business centre. We will do our best to address
your comment or question in timely matter.

Before first use, please read this manual carefully. It is your responsibility to study all instructions,
necessary for safe use and operation and to understand all risks that may be involved during the use
of power machines.

WARNING! Do not try to use this machine before reading this entire manual and before you know
how to handle it. Keep this manual for future reference.
Pay special attention to safety instructions. Not complying with safety rules may cause injury to the
operating person or to people standing by or it may cause damage to the machine or to the work
piece.
Pay special attention to safety notes and safety labels on the machine.
Never remove or damage them.

Please, write information such as the invoice number
and the number of the sale receipt here in this box.

This universal grinding machine may be used for saw blade and drill sharpening.

The accuracy of instructions, graphs and information contained herein, depends on the printing date. Due to

continuous product improvement, the manufacturer reserves the right to change technical parameters of the

product, without prior customer notification.

Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~230V/50 Hz

Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 W

Operational speed/rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,840 min.

-1

Diamond sharpening wheel

Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 mm

Inner blade diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 mm

Thickness in the wheel middle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 mm

Tilt of grinding platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15°

Grinding wheels that may be used with your machine . . . . . . . . . . . . . . . . . . . . . . . . . . .120 - 750 mm

Maximum diameter of grinded drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 mm

Gross weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 kg

Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 kg

Packaging dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .530 × 340 × 400 mm

DESCRIPTION

TECHNICAL SPECIFICATION

REPAIR AND MAINTENANCE REPORT

Report and maintenance report:

DATE

SERVICE SHOP

REPAIR AND MAINTENANCE REPORT

REVISION REPORT

The user is obligated to perform tests and revisions of electrical equipment of the machine
in accordance with valid rules and regulations. Result report:

DATE

REVISION TECHNICIAN

Number / SIGNATURE

REVISION REPORT

3

???

• This device may be used by a qualified person, 18 years or older who has been

trained in work and environmental safety procedures.

• Any person using this equipment must possess a medical certificate

demonstrating his eligibility to operate this equipment.

Listing of self-adhesive warning labels that must be placed on your machine after
assembly.

We recommend placing work safety regulations notices at your workshop:

• "Prevent most common injuries" - GRINDING MACHINES

Symbols used in this manual

Warning!
This symbol informs you about the risk of personal injury or damage to the machine
or materials.

Caution! You are using electrically powered machine!
Electrical hazard.

Risk of being caught by spinning machine parts!
Caution! Loose clothing or body parts may get caught by moving machine parts.

Warning!
Danger of damage.

Note:
Additional information.

Use personal safety gear.

General instructions

• Plastic bags and packaging materials pose danger for small children and animals.

• Make sure you know how to control your tool or machine and that you are familiar with its operating

procedure. Know the hazards that may occur, if not used correctly.

• If other person is using this machine make sure that he knows how to safely operate this equipment and

that he is familiar with hazards and risk that may occur, if not used correctly.

• Pay special attention to safety notes and safety labels on the machine. Never remove or damage them.

If the warning label becomes unreadable, please contact your vendor.

SAFETY PRECAUTIONS

In case of fire do not use water or foam
fire extinguishers

Use respiratory passageways protection

Use eye protection

Caution! Electrical equipment

Read manual before use

Recycling