Unilock Loxury IX, LL92PR, LL92PRN User Manual

Model No. LL92PR, LL92PRN

2016. 03

1. Specific Features

- 3 levels key (RFID tag) management system

- Support Mifare Classic & Ultralight as standard

- Support Mifare DESFire with separate model

- Comfortable grip feeling with round handle front

- Intuitive hidden LED Icons

- Shared use mode or assigned use mode

- Burglar alarming when opening by force (O

- Warning alarms for low battery or abnormal status

- External 9V battery connector for low battery

- Melody on-off setting

- In-use LED icon

- Auto locking or manual locking

- 1 year battery life with 3 AA type alkaline batteries

- Material: PC/ABS

2. Dimensions

- Front: 98(H) * 66(W) * 29.2(T) mm

- Rear: 132(H) * 66(W) * 29(T) mm

3. Supported door thickness

- Size A: 15~20mm (0.59~0.78 inches)

- Size B: 20~25mm (0.79~0.98 inches)

- Size C: 25~30mm (0.99~1.18 inches)

 Contact us for less than 15mm or larger than 30mm

4. Part Names

5. Supported key levels

RF key levels Max no. of RF key

Owner Key 1

Master Key 20

User Key 20

Cleaner Key 20

6. Change Mode Options

Need to use “Lock Manager” software and USB gender for changing the
options.

Functions Options No. of Beep Factory Setting

Use of Key

Shared Use 1

Assigned Use 2 Default

Locking type

Auto Locking

Manual Locking Default

Beep Levels

High Default

Mid

Low

Off

In Use LED

On

Off Default

Cleaner Key

Enable Cleaner Key Default

Disable Cleaner Key

7. LED Icons

Icon Function Color Status

Locking Status

Green

Open,
registered

Red Closed

8. Registering and Using RFID keys

 LL92PR and LL92PRN are adopted industry first key-in mechanism for

waking up the lock from power saving mode (sleep mode). The key is
secured in the lock and cannot be take out when the door is open. Key is
can be taken out after close the door

A. Register an Owner key

- First used RF card became an Owner key.
① Install LL94AR into the locker.
② Insert 3 AA alkaline batteries.
③ First inserted key become an Owner key. Insert GK91PR RF key for

registering it as an Owner key. Beeps 3 times and blinking green LED if
the Owner key registration is done.

- 1 Owner key can be registered for a LL92PR. Owner key registers or
delete Master keys and Cleaner keys. But cannot operate the lock.

B. Register Master key(s)
① Insert Owner key (No need to use Owner key at the first time) and take

out. LED blinks during registration mode for 8 seconds

② Insert another GK91PR to register it as a Master key . Beep 3 times and

green LED blinks if the registration is done.

③ Insert another GK91PR for up to 20 in sequence or insert same key twice

to end the registration.

 Example: In sert A key (4 sec onds) – insert B key – insert C key –

insert C key again

 Result: Three (A, B and C) Master keys has been registered.

- Master key can open the lock. But cannot lock.

C. Register & using User key(s)

① Insert any Master GK91PR key
② Insert an extra GK91PR key (LED blinks during registration mode for 8

seconds). Beep 3 times and green LED blinks if the registration is done.

③ Touch another GK91PR key for up to 20 in sequence or insert same key

twice to end the registration.

 Example: Insert any Master key – insert A key – insert B key – insert

C key – insert C key again

 Result: three (A, B and C) User keys has been registered.

- The User key can lock or unlock LL92PR.

D. Change or delete User key (while lost user key)

i. Insert any Master key for deleting all registered User keys.

ii. Register new User keys.