UNILINE ASD-10QR User Manual

ASD-10QR

smoke alarm using radio links

User Manual

Safety issues

Please follow the recommendations:

• Loud test signal will sound during the function test (see Test mode). Keep safe distance of 50 cm
between your ear and the alarm.

• Do not paint the alarm.

• Do not locate smoke alarms in highly vapourized premises such as bathrooms, saunas and kitchens

Features

• Q-label for higher quality

• Infinite number of smoke alarms can be radio interlinked with possibility to transmit Remote Alarm

and Remote low battery signals.

• Simple generation of the unique code and wireless interlinking

• Different sounding of Alarm and Remote Alarm modes

• Secure fire detection by intellectual sensitivity calibration using integral microcontroller and

intellectual analysis of smoke chamber signal

• Drift compensation (including smoke chamber contamination). This mechanism automatically
adjusts sensitivity of the smoke alarm to the factory level during operation

• Audible indication of exceeding the threshold compensation level (signal to cleaning the smoke
chamber from dust)

• New technical solutions were applied thanks to which influence of electromagnetic interferences
and temperature change has been reduced.

• Different ways of mounting (screws/adhesive pads)

• Fluent sound volume increase (fade-in) in Alarm, Remote Alarm and Test modes

• Hush function – muting of local alarm signal for approx. 10 min. by pushing the Test button.

•

You will hear a sound signal of the last fault when removing the alarm from the base

• You will hear the relevant sound signal in case of fault when removing the alarm from the base

•

Supports test RF remote control

Specifications

Standby current consumption ≤ 12 µА

Alarm current consumption ≤ 90 mА

RF frequency 868.100 (<1% duty cycle)

RF Codes 65535

RF Power +14 dBm max

RF range 100 meters min air free

Battery life at least 10 years under normal conditions

Battery type sealed, Lithium, AA, 3.0V

Hush time 10 ±2min.

Alarm and Remote Alarm sound level > 85dB at 3 m

Light and sound indication

Standby mode, Alarm,

r

emote Alarm, low battery,

remote low battery, smoke chamber fault,

exceeding the ultimate compensation level

(see Sound and Light signals table)

Operating temperature range 0 – 55° C

Operating humidity < 93% RH at 40° C

Dimensions Ø80 х 45 mm

Approvals

EN 14604, CE, VdS3131, VdS

3515

, DIN 14676

,

R&TTE

Audible and visual signals

Audible signal Red LED Function

No signal flashes every 320 sec

Standby mode,

periodical automatic self-diagnostics

Long intermittent

signal

flashes every 0.5 сек. Alarm status

Long intermittent

signal

(different from the

latter)

off

Remote Alarm status.

One of the interlinked alarms went to Alarm

status