Unify OpenStage WL3 Plus, OpenStage WL 3 Installation Manual

Battery Pack Charger 
OpenStage WL 3 / OpenStage WL3 Plus

Installation Guide

A31003-M2000-J101-2-7631

Our Quality and Environmental Management Systems are
implemented according to the requirements of the ISO9001 and
ISO14001 standards and are certified by an external certification
company.



Copyright © Unify GmbH & Co. KG 02/ 2014



Hofmannstr. 51, 81379 Munich/Ger many

All rights reserved.

Reference No.: A31003-M2000-J101-2-763 1

The information provided in this document contains merely general descriptions or
characteristics of perfo rmance which in case of actua l use do not always apply as



described or which may change as a result of further development of the products.



An obligation to provide the respective cha racteristics shall only exist if expressly agreed in
the terms of contract.

Availability and technical specifications are subject to change without notice.

Unify, OpenScape, OpenStage and HiPath are registered trademarks of Unify GmbH & Co. KG.
All other company, brand, p roduct and service names are trademarks or registered tra demarks
of their respective holder s.

unify.com

Inhaltsverzeichnis 3

Inhaltsverzeichnis

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Regulatory Compliance Statements (EU/EFTA only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Regulatory Compliance Statements (USA/Canada only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remove the Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Install Single Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Install Multiple Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Battery Disconnection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Introduction 4

Introduction

This document describes how to install and operate the Battery Pack Charger.

Each Battery Pack Charger charges six batteries simultaneously.

Figure 1 The Battery Pack Charger

Single Unit

The Battery Pack Charger can be installed as a single unit.

Multiple Units

A number of Battery Pack Chargers and Charging Racks may be connected together. Maximum
five units may be connected. An installation with multiple units requires a fixed electrical installati

-

on.

NOTE: In the USA and Canada the Battery Pack Charger must only be installed as a single unit.
Connection of several units is not permitted.

Supply voltage: 100-240VAC/0.7A 50/60 Hz

Building fuse for fixed installation: 10 A max.