Uniform Wares 351/br-01, 351/br-02, 351/rg-01 User Manual

OFFICE ADDRESS:

Studio 12 A ,
Broadway Market Mews,
London E8 4TS, England

TELEPHONE:

[phone]

EMAIL:

[e-mail]
[e-mail]
wholesale@uniformwares

WEBSITE:

www.uniformwares.com

COMPANY DETAILS

Uniform Wares Limited
Company Number 7187255

User Manual
351 Series

351/br -01

set ting the time

1 Adjust the watch crown (a) situated on the side of the

case at the 3 o’clock position out from the Operating
Position to Set Position by pulling outwards where the
crown is fully extended
at the second adjustment click.

2 Turn the crown anti-clockwise to the desired time, do

not turn the crown clockwise.

3 When the time is set, push the crown back to the

Operating Position.

Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.

set ting the date

1 Pull the watch crown out from the Operating Position to

set Position 1 [p1] where the crown (a) is half extended at
the rst adjustment click.

2 In Set Position 1 [p1] turn the crown clockwise until the

correct date is displayed

3 When the date is set, push the crown back to the

Operating Position. The watch will resume.

Please note: The date should be set before 12 noon so that
the calendar indicator changes in sync at twelve midnight
and not 12 noon.
Please note: Whilst the crown is in the Set Position 1 [p1]
or 2 [p2] the watch is not moisture resistant.

351/br- 02

set ting the time and day

1 Adjust the watch crown (a) situated on the side of the

case at the 3 o’clock position out from the Operating
Position to Set Position 2 [p2] by pulling outwards where
the crown is fully extended at the second adjustment
click, the second hand will stop clicking.

2 Turn the crown anti-clockwise to the desired time, do

not turn the crown clockwise.

3 When the time is set, push the crown back to the

Operating Position.

Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.

set ting the date

1 Pull the watch crown out from the Operating Position to

set Position 1 [p1] where the crown (a) is half extended at
the rst adjustment click.

2 Turn the crown clock wise to set the date and anti-

clock wise to display the desired day. Please note: Your
watch has a dual language day display but will only
function according to the language you have set.

3 When the date and day are set, push the crown back

to the Operating Position. The second hand will resume
ticking.

OFFICE ADDRESS:

Studio 12 A ,
Broadway Market Mews,
London E8 4TS, England

TELEPHONE:

[phone]

EMAIL:

[e-mail]
[e-mail]
wholesale@uniformwares

WEBSITE:

www.uniformwares.com

COMPANY DETAILS

Uniform Wares Limited
Company Number 7187255

User Manual
351 Series

351/rg -01

set ting the time

1 Adjust the watch crown (a) situated on the

side of the case at the 3 o’clock position out
from the Op erating Position to the Set Position
by pulling outwards, you will hear a click and
the second hand situated at the 6 o’clock p osition will
stop ticking.

2 Turn the crown clock wise to the desired time, do not

turn the crown anti-clockwise.

3 When the time is set, push the crown back

to the Operating Position.

Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.

OFFICE ADDRESS:

Studio 12 A ,
Broadway Market Mews,
London E8 4TS, England

TELEPHONE:

[phone]

EMAIL:

[e-mail]
[e-mail]
wholesale@uniformwares

WEBSITE:

www.uniformwares.com

COMPANY DETAILS

Uniform Wares Limited
Company Number 7187255

User Manual
351 Series

wrist watch care

Your Uniform Wares timepiece requires a certain amount
of care, the following guidelines will enable you to ensure
its reliability and protect its appearance over time.

cleaning

Please use a clean, lint free cloth with warm
water and if re quired a mild detergent diluted
in water to remove any dirt from the case.
To clean the lens please use a clean chamois cloth. Avoid
submerging the watch case in water.

battery

Your timepieces power source is a Swiss made cell which
has an estimated lifespan of 36 months. When your
batter y requires replacing please refer to the Uniform
Wares website www.uniformwares.com/service for
information on battery replacement.

leather bracelets

Your leather bracelet is made from naturally tanned calf
leather which over time will develop an inherent, natural
patina that improves with age. Never theless we suggest
you limit the bracelet s expose to moisture and avoid

complete submersion into water which will signicantly

deteriorate the quality and feel of bracelet.
When a replacement bracelet is required, please refer to
the Uniform Wares website www.uniformwares.com for
information on replacements and tting.

rubber bracelets

After long periods of use your rubber brac elet may require
cleaning . To do so please use a clean cloth and a mild

detergent diluted in warm water to clean the aected

areas. For more persistent marks use a soft bristle brush

to gently clean the aected areas with a detergent diluted

in warm water. Avoid submerging the watch case
in water.

wate r res is tan ce

This watch is designed to withstand everyday use and
has a 5ATM water resistance rating. Exposure to high
humidity and light rain showers are acceptable however
you should avoid wearing the watch whilst showering,
swimming, diving or during any other activity where
it may subjected to abnormal water pressures or
environments where abnormal he at and moisture are
present (ie ‘Saunas’ or ‘Hot Tubs’). This combination may

have a negative aect on the seals and gaskets of the

timepiece.

condensation

If your timepiece experiences a sudden change in
temperature or pressure, a slight condensation may
appear under the crystal of your watch. This mist will

disappear by itself and will not aect the functioning

of your timepiece. If the condensation persists please
contact place of purchase.

guarantee

This Uniform Wares product is guaranteed against
defects in materials and workmanship under normal use
for a period of two year s from the date of retail purchase
by the original end-user purchaser.

If a hardware defect arises within the warrant y period
please refer to the Uniform Wares website
www.uniformwares.com/service for information on the
repair procedure for your particular timepiece.

items not cove red under guar antee

- Wristwatch case, lens or back plate tarnished
through general wear and ageing of the product.

- Bat tery

- Brac elets / Straps

- Damage caused by accident, misuse or lack of care

- Defect of internal or ex ternal components due
to contac t with water or moisture

Please Note: This Guarantee shall be deemed
void if the case of the timepiece has been opened
for inspection or ser vice, dismantled or repaired
by anyone but an authorised Uniform Wares
service centre.