Your Uniden PC78LTD is a high-quality communications device designed
for use in the Citizens Band Radio Service. It will operate on any of the 40
AM frequencies authorized by the Federal Communications Commission
(FCC).
The Citizens Band Radio Service is under the jurisdiction of the Federal
Communications Commission (FCC). Any adjustments or alterations
which would alter the performance of the transceiver’s original FCC type
acceptance, or which would change the frequency determining method,
are strictly prohibited. Replacement or substitution of crystal, transistors,
ICs, regulator diodes, or any other part of a unique nature, with parts
other than those recommend by Uniden, may cause violations of the
technical regulations in Part 95 of the FCC Rules or in violation of type
acceptance requirements in Part 2 of the rules.
EMERGENCY OPERATIONS
1. Set the switch to CH9 or turn Channel Selector knob to Channel 9.
2. Press the microphone PTT switch and speak clearly.
3. If there is no response, select an active channel and ask that party
to relay your emergency broadcast on Channel 9.
All channels except Channel 9 may be used for normal communication.
Channel 9 is reserved by the FCC for emergency communication
involving the immediate safety of individuals or protection of property.
Channel 9 may also be used to render assistance to others.
This is an FCC rule and applies to all operators of CB radios.
WHAT’S IN THE BOX
Carefully unpack your PC78LTD and check the contents against this list:
PC78LTD
CB 2-way mobile radio
Microphone Mounting Bracket Kit DC Power Cord Owner’s Manual Part 95 Subpart D (FCC Rules)
5
If any items are missing or damaged, contact our Customer Care Line
immediately at 1-800-658-8068.
Never use damaged products!
FRONT VIEW
17
1691112131415
810
ItemDenition
Microphone jack
1
ON OFF - VOLUME: Turns radio on or o; adjusts speaker volume.
2
SQUELCH: Reduces background noise when there is no incoming
3
signal.
MIC GAIN knob: Adjusts microphone sensitivity
4
RF GAIN knob: Improves reception in strong signal areas.
5
SWR CAL: Calibrates the meter for Standing Wave Ratio (SWR)
6
measurements. (See page 11.)
Channel knob: Selects channel.
7
Channel Display: Displays current channel selection
8
ANT LED: Indicates a high SWR condition in antenna system.
9
Check antenna, cable, and connections.
10
11
12
13
14
RX/TX LED: Red-transmitting; green-receiving.
HI CUT/OFF switch: When turned on, cuts high audio frequencies.
CH9/OFF switch: Instantly tunes to emergency CB Channel 9. Turn
o to resume normal channel operations.
BRT/DIM switch: Adjusts the LED brightness
CB/PA: Selects CB (Citizen’s Band) or PA (Public Address).
Do not use PA function unless an external speaker is connected.
43
62157
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.