Uniden America UC033R, UC033 Users manual

UC033BH.indd A

10/25/2006 9:05:54 AM

UC033BH.indd A

10/25/2006 9:05:54 AM

Setup Guide

UC033BH.indd 1

10/25/2006 9:06:14 AM

EXI5660

Step 1 Check the Package Contents

Make sure your cordless phone’s
packaging includes the following
items.

Base Handset AC adapter

Belt clip Rechargeable

Also included: • Owner’s manual

battery

Step 2 Install the Handset Battery Pack

Note Use ONLY the Uniden

rechargeable battery pack
supplied with your new
phone!

Remove the
cover.

Connect the
battery pack
with the correct
polarity.

Replace the
cover.

Telephone

cord

Step 3 Set up the Base

Plug the AC adapter cord to
the DC IN 9V jack (yellow).

Plug the AC adapter to a
120V AC power outlet.

Note Use ONLY the Uniden AC

adapter supplied with your
new phone!

Step 4 Charge the Handset

Place the handset in
the base.
Make sure that
charge LED
illuminates.

Charge for 15-20 hours before
using your phone.

Step 5 Connect to the Phone Line

Plug one end of the
telephone cord into
the base TEL LINE
jack.

Plug the other
end into the
telephone wall
jack.

Step 6 Make & Receive Calls

To Make a Call

Press

talk/fl ash

Listen for dial tone.

Dial the desired
number.

To Receive a Call

Pick up the handset and
press

talk/fl ash

.

.

To Hang Up a Call

Press
handset to the base.

or return the

end

1

Additional Features

For more information on these
and other features, please refer to
your Owner’s Manual. For your
convenience, listed below are
important features that will help
you set up your new cordless
phone.

Handset/Base Set up:

- Adjust the Earpiece
Volume o P.25

- Set the Ringer Volume o P.25

- Set Tone/Pulse Dialing o P.17

Caller ID:

Set Caller ID on Call Waiting
(CIDCW) o P.15

Note: You must subscribe to
Caller ID services through your
local telephone provider to use
Caller ID and CIDCW.

Refer to your Owner’s Manual for
detailed operations.

For answers to questions and to
order genuine Uniden parts and
accessories 24 hours a day visit
our website at www.uniden.com. If
you have any problems, you can
also call our Customer Hotline at
1-800-297-1023 during regular
business hours.

UC033BH.indd 1

10/25/2006 9:06:14 AM

Guía de programación

negro

UC033BH.indd 2

10/25/2006 9:06:23 AM

EXI5660

1° Paso Inspección del contenido del embalaje

Asegúrese de que haya recibido los
siguientes artículos en el paquete

Base Receptor

Pinza para

la correa

Además va incluido: • Manual del usuario

recargable

2° Instalación del paquete de pilas del receptor

Nota ¡Use SOLAMENTE el

paquete de pilas recargable
de Uniden suministrado con
su nuevo teléfono!

Quite la tapa.

Conecte el
paquete de pilas
con la polaridad
correcta.

Reponga la tapa

Pila

Adaptador CA

Cable

telefónico

rojo

negro

negro

3° Paso Preparación de la base

Conecte el adaptador CA
en el enchufe (amarillo) DC
IN 9V.

Pase el cable

A la toma CA

Conecte el adaptador CA en
una toma de 120V CA.

Nota ¡Use SOLAMENTE el

4° Paso Carga del receptor

Coloque el receptor
en la base.
Asegúrese de que el
LED de carga se
ilumine.

negronegro

rojo

Cargue el receptor de 15 a 20
horas antes de usar el teléfono.

Al enchufe DC IN 9V

Adaptador CA
(suministrado)

adaptador CA de Uniden
suministrado con su
teléfono!

5° Paso Conexión de la línea telefónica

Conecte un
extremo de la
línea telefónica en
el enchufe TEL
LINE en la base.

Al enchufe telefónico

Cable de la línea telefónica

Conecte el otro extremo en el
enchufe telefónico de la pared.

(suministrado)

Al enchufe TEL LINE

6° Paso Realización y recepción de llamadas

Para hacer una llamada

Oprima
Espere por el tono de

marcación.
Marque el número

deseado.

Para recibir una llamada

Levante el receptor y
oprima

talk/fl ash

talk/fl ash

.

.

Para colgar una llamada

Oprima
el receptor a la base.

end

o devuelva

Para más información sobre estas y otras
características, le rogamos que consulte su
Manual del usuario. Para su conveniencia, hemos
listado abajo unas características importantes, las
cuales le ayudarán a programar su nuevo teléfono
inalámbrico de Uniden.

Programación del receptor/base:

- Ajuste del volumen del auricular y del

- Programación del volumen del timbre

- Programación de la marcación por

Identifi cación de llamadas (Caller ID):

Programe la Identifi cación de llamadas en
Llamadas en espera (CIDCW) o P.15

Nota: Usted debe estar suscrito al
servicio de Identifi cación de llamadas
con su proveedor de telefonía local para
poder usar las características de Caller
ID y de CIDCW

Consulte su manual del usuario para
operaciones más detalladas.

Si tiene preguntas o quiere ordenar
partes y accesorios genuinos de Uniden
las 24 horas al día, visite nuestra página
en el internet ww.uniden.com.
Si tiene cualquier problema, puede llamar
a nuestra Línea Roja para el consumidor
en el 1-800-297-1023 durante las horas
regulares de ofi cina.

2

Características adicionales

altavoz o P.25
o P.25
tono/pulso o P.17

UC033BH.indd 2

10/25/2006 9:06:23 AM

Contents

UC033BH.indd 3

10/25/2006 9:06:26 AM

Setup Guide ...................................................................1

Welcome/Accessibility ..................................................4

Terminology/Manual Conventions ...............................5

Product Overview ..........................................................6

Controls and Functions ................................................7

Installing the Phone ......................................................9

Choosing the Best Location ................................................ 9

Installing the Rechargeable Battery Pack into the

Handset.......................................................................10

Installing the Base Unit .....................................................11

Mounting the Base Unit on a Wall .....................................13

Installing the Belt Clip .......................................................14

Headset Installation ..........................................................14

Basic Setup ..................................................................15

Activating AutoT alk ............................................................15

Activating Caller ID on Call Waiting ..................................15

Programming Y our Area Code ..........................................16

Choosing the Dialing Mode ...............................................17

Setting the Language ........................................................18

Using the Speed Dial Memory ....................................19

Storing a Name and Number in Memory ..........................19

Storing Caller ID in Speed Dial Memory ...........................22

Using Y our Phone ........................................................23

Making and Receiving Calls .............................................23

Making a Call from Speed Dial Memory ...........................23

Making a Call from the Caller ID List ................................24

Redialing the Last Dialed Number ....................................25

Selecting the Ring Tone and Volume ................................25

Adjusting the Earpiece Volume .........................................25

Using Call Waiting .............................................................26

Selecting a Different Channel ...........................................26

Find Handset ....................................................................26

Tone Dialing Switch-over ..................................................27

Voice Mail Waiting Indicator ..............................................27

Caller ID and CIDCW (Caller ID on Call Waiting) ......28

Caller ID on Call Waiting (CIDCW) ...................................29

Viewing the Caller ID Message List ..................................29

Deleting Information from the Caller ID List ...................... 30

Changing the Digital Security Code ..........................31

Maintenance .................................................................32

Troubleshooting ..........................................................35

Liquid Damage ..................................................................37

Precautions ..................................................................38

The FCC Wants You To Know .......................................... 39

I.C. Notice .........................................................................41

One Year Limited Warranty .........................................42

Index .............................................................................43

3

UC033BH.indd 3

10/25/2006 9:06:26 AM

Welcome

UC033BH.indd 4

10/25/2006 9:06:27 AM

Congratulations on your purchase of the Uniden cordless telephone. This cordless phone is designed for reliability,
long life, and outstanding performance.

Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this
manual may differ from the actual unit. The color of your cordless telephone may vary.

®

Uniden

is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporation.

Accessibility

Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer
service assistance or if you have any questions about how Uniden’s products can accommodate
persons with disabilities, please call the accessibility voice/TTY line:

1-800-874-9314.
Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under

the ƎAccessibilityƎ link. If your call is received outside of our business hours, you can leave us a message and we will
call you back.

4

UC033BH.indd 4

10/25/2006 9:06:27 AM

Terminology

UC033BH.indd 5

10/25/2006 9:06:28 AM

Base The main part of the phone that connects to your phone line and lets you make and receive calls.
CID

CIDCW

Caller ID is available from your telephone provider. With this service, you can see the name and number
of incoming callers.

Caller ID on Call Waiting is available from your telephone provider. With this service, you can see
incoming caller information while on another call.

Handset A cordless handset that can be placed anywhere in your home or offi ce where AC power is available.
Standby

Talk

The handset may be sitting on the base charging or out of the base cradle, but is NOT in use.
[talk/fl ash] has not been pressed and there is no dial tone.

When a dial tone has been enabled allowing the user to dial and carry on a conversation with an outside
party.

Manual Conventions

This manual uses several different type styles to help you distinguish between different parts of the phone:

• lower case bold text with Ǝ[ ]Ǝ indicates a key or button on the phone

• ALL CAPITALS indicates text on the display, such as menu options, prompts, and confi rmation messages

• lower case bold text indicates a status light on the phone base

5

UC033BH.indd 5

10/25/2006 9:06:28 AM

Product Overview

UC033BH.indd 6

10/25/2006 9:06:28 AM

Main Phone Features

• 5.8 GHz Extended Range Technology

• Caller ID/Caller ID on Call Waiting

• 3-Line Backlit LCD

• Trilingual Menu Displays (English, Spanish, or French)

• 30 Caller ID Memory

• 10 Number Memory Dialing

• Last Number Redial

• Tone/Pulse Dialing

• Page/Find Handset Key

• Earpiece/Ringer Volume Controls

• Mute or Turn Ringer Off

• Hearing Aid Compatible

• 20-Channel Auto Scan

• Desk or Wall Mountable

6

UC033BH.indd 6

10/25/2006 9:06:28 AM

Controls and Functions

UC033BH.indd 7

10/25/2006 9:06:29 AM

Handset

1

1

6

6

2

2

7

7
8

10

10
11

11
12

12

8

9

9

3

3
4

4

5

5

13

13
14

14

15

15
16

16
17

17
18

18
19

19

1. Handset antenna

2. Belt clip hole

3. Jack for optional handset

4. Handset ringer speaker

5. Handset battery compartment

6. Handset earpiece

7. LCD display

8. [

] and [ ] (volume & ringer up/down) keys

9. [cid/menu] key

10. [

/tone/ ] (left cursor) key

11. [redial/pause] key

12. [select] key

13. [talk/fl ash] key

14. [end] key

15. [#/

16. [mem] (memory) key

17. [delete/channel] key

18. Handset microphone

19. Handset charging contacts

] (right cursor) key

7

UC033BH.indd 7

10/25/2006 9:06:29 AM

Main Base Unit

UC033BH.indd 8

10/25/2006 9:06:36 AM

20

21

24 25

22

23

UC033BH.indd 8

20. charge/in use LED

21. Base antenna

22. Base charging contacts

23. [fi nd hs] key

24. Base DC IN 9V jack

25. TEL LINE jack

8

10/25/2006 9:06:36 AM

Installing the Phone

UC033BH.indd 9

10/25/2006 9:06:39 AM

Choosing the Best Location

Before choosing a location for your new phone, here are some important guidelines you should consider:
Avoid heat sources, such as radiators,

Avoid heat sources, such as radiators,
air ducts, and sunlight

air ducts, and sunlight

Avoid television sets and other

Avoid television sets and other
electronic equipment

electronic equipment

Choose a central location

Choose a central location

• The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a
switch).

• The base and handset should be kept away from sources of electrical noise such as motors, microwave ovens,
and fl uorescent lighting.

• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the
base as high as possible.

• The base should be placed in an open area for optimum range and reception.

• If your home has specially wired alarm equipment connected to the telephone line, be sure that installing
the system does not disable your alarm equipment. If you have questions about what will disable your alarm
equipment, contact your telephone company or a qualifi ed installer.

Avoid noise sources such as a window by

Avoid noise sources such as a window by
a street with heavy traffi c

a street with heavy traffi c

Avoid microwave ovens

Avoid microwave ovens
Avoid excessive moisture,

Avoid excessive moisture,
extremely low temperatures, dust,

extremely low temperatures, dust,
mechanical vibration, or shock

mechanical vibration, or shock

Avoid personal computers

Avoid personal computers

Avoid other cordless telephones

Avoid other cordless telephones

9

UC033BH.indd 9

10/25/2006 9:06:39 AM

Installing the Rechargeable Battery Pack into the Handset

UC033BH.indd 10

10/25/2006 9:06:44 AM

The handset is powered by a rechargeable battery pack. Once installed, the battery
charges automatically when the handset is placed in the base unit.

To install the rechargeable battery pack:

1) Press down on the handset battery case cover (use the fi nger indention for a better

grip) and slide the cover downward to remove.

2) Plug the battery pack connector (red & black wires) into the small jack inside the

battery compartment. (The connector notches fi t into the grooves of the jack only
one-way.) Match the wire colors to the polarity label in the battery compartment,
connect the battery, and listen for a click to insure connection.

3) Make sure you have a good connection by slightly pulling on the battery wires. If

the connection is secure, the battery jack will remain in place.

4) Place the battery case cover back in the handset by sliding it upwards until it clicks

into place.

Note: Use only the Uniden (BT-905) rechargeable battery pack supplied
with your phone.

10

UC033BH.indd 10

10/25/2006 9:06:44 AM

Installing the Base Unit

UC033BH.indd 11

10/25/2006 9:06:44 AM

1) Connect the AC adapter to the DC IN 9V jack and to the

standard 120V AC wall outlet.

Note:

• Use only the supplied AD-0001 AC adapter. Do not
use any other AC adapter.

• Do not place the power cord where it creates a trip
hazard or where it could become chafed and create
a fi re or electrical hazard.

2)

Charge the handset by placing in the base unit with the
keypad facing forward.

11

UC033BH.indd 11

10/25/2006 9:06:44 AM

3) Make sure that the charge/in use LED illuminates. If the LED does not

UC033BH.indd 12

10/25/2006 9:06:47 AM

illuminate, check to see that the AC adapter is plugged in and that the
handset makes good contact with the base's charging contacts.

Note:

• Connect the AC adapter to a continuous power supply (not
controlled by a wall switch).

• Place the base unit close to the AC outlet to avoid long
extension cords.

• Charge your handset at least 15 - 20 hours before plugging into
the phone line.

4) Once the handset battery pack is fully charged, connect the telephone line
cord to the TEL LINE jack and a telephone outlet. If your telephone outlet
isn't modular, contact your telephone company for assistance.

12

ModularModular

UC033BH.indd 12

10/25/2006 9:06:47 AM

Mounting the Base Unit on a Wall

UC033BH.indd 13

10/25/2006 9:06:50 AM

Standard wall plate mounting

This phone can be mounted on any standard wall plate.

1) Plug the AC adapter to the DC IN 9V jack.

2) Plug the AC adapter into a standard 120V AC wall outlet.

3) Plug the telephone line cord into the TEL LINE jack.

4) Plug the telephone line cord into the telephone outlet.

5) Align the mounting slots on the base with the mounting posts on the
wall. Then push in and down until the phone is fi rmly seated.

Direct wall mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the
following:

• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when

inserting screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.

13

1

1

3

3

5

5

5

5

2

2

4

4

UC033BH.indd 13

10/25/2006 9:06:50 AM

• Make sure the wall material is capable of supporting the weight of the base and handset.

UC033BH.indd 14

10/25/2006 9:06:54 AM

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall

material where the base unit will be placed.

1) Insert two mounting screws into the wall (with their appropriate anchoring device), 3-15/16
inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the
phone.

2) Refer to steps 1 through 5 on page 13 to mount the telephone.

Installing the Belt Clip

To attach the belt clip

Insert the belt clip into the holes on each side of the handset. Press down until it clicks.

To remove the belt clip

Pull both sides of the belt clip to release the tabs from the holes.

Headset Installation

Your phone may be used with an optional headset. To use this feature, insert the headset plug into
the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased
by visiting our website at www.uniden.com or by calling our Parts Department. See back cover
page.)

14

UC033BH.indd 14

10/25/2006 9:06:54 AM