Uniden America UB384 User Manual

SDS200

Owner’s Manual

The AMBE+2™ voice coding Technology embodied in this product is protected by intellectual

The AMBE+2™ voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc.

property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc.

The voice coding technology is licensed solely for use within this Communications Equipment.

The voice coding technology is licensed solely for use within this Communications Equipment. The user of this technology is explicitly prohibited from attempting to extract, remove, decompile,

The user of this technology is explicitly prohibited from attempting to extract, remove, decompile,

The user of this technology is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into

reverse engineer, or disassemble the object code, or in any other way convert the object code into

reverse engineer, or disassemble the object code, or in any other way convert the object code into a human-readable form.

a human-readable form.

US Patent Nos #7,970,606, #6,912,495 B2, #6,199,037 B1, #5,870,405, #5,826,222, #5,754,974,

#5,701,390, #5,715,365, #5,649,050, #5,630,011, and #5,517,511. microSD is a registered

#5,701,390, #5,715,365, #5,649,050, #5,630,011, and #5,517,511. microSD is a registered trademark of SanDisk Corporation.

trademark of SanDisk Corporation.

HomePatrol is a registered trademark of Uniden America Corporation, Irving, Texas.

At Uniden, we are always improving our products. This manual may not contain the latest

At Uniden, we are always improving our products. This manual may not contain the latest improvements to this model. Check our Owner’s Manual downloads at www.uniden.com for the

improvements to this model. Check our Owner’s Manual downloads at www.uniden.com for the

improvements to this model. Check our Owner’s Manual downloads at www.uniden.com for the latest updates.

latest updates.

Questions? Problems? Get help on the web at www.uniden.com.

CONTENTS

USING THIS MANUAL ...................................................1

IMPORTANT INFORMATION .............................................2

THE FCC WANTS YOU TO KNOW ............................................. 2

MODIFICATION NOTICE ..................................................... 2

PART 15 INFORMATION ..................................................... 2

GENERAL PRECAUTIONS .................................................... 3

Earphone Warning ............................................................3

Liquid Exposure Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

SCANNING LEGALLY ........................................................ 3

AVIS D’INDUSTRIE CANADA ................................................ 4

INTRODUCTION ........................................................5

HOW DOES THE HOMEPATROL® DATABASE WORK? ......................... 5

WHAT YOU HEAR ........................................................... 5

CREATE FAVORITES LISTS ................................................... 5

AVOID TRANSMISSIONS .................................................... 5

REPLAY TRANSMISSIONS ................................................... 5

MAIN FEATURES .......................................................6

INCLUDED WITH YOUR SCANNER .......................................8

BASIC USAGE INFORMATION ...........................................9

UNDERSTANDING THE MEMORY ............................................ 9

FAVORITES LISTS ..............................................................9

SYSTEMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

TRUNKING SITES ..............................................................9

DEPARTMENTS ................................................................9

SENTINEL SOFTWARE ....................................................... 9

MANAGE PROFILES ...........................................................9

MANAGE FAVORITES LISTS .................................................. 10

MANAGE DATABASES ....................................................... 10

HOW TO INSTALL SENTINEL SOFTWARE ..................................... 10

UPDATING FIRMWARE ...................................................... 10

UPDATING THE DATABASE .................................................. 10

DATA NAMING ............................................................. 10

PRIORITY SCANNING ......................................................11

SCANNING ORDER .........................................................11

SCANNING ................................................................12

Scanning Checklist: ......................................................... 12

REPLAY THE LAST TRANSMISSIONS ........................................12

START/STOP RECORDING ..................................................12

AVOIDING CHANNELS, DEPARTMENTS, SITES, AND SYSTEMS ...............12

Channel Avoid .............................................................. 12

Department Avoid .......................................................... 13

Site Avoid .................................................................. 13

System Avoid ............................................................... 13

HOLDING A SYSTEM, DEPARTMENT, SITE, OR CHANNEL ....................13

INSTALLING YOUR SCANNER ..........................................14

POWER RELATED ISSUES ................................................... 14

CONNECTING AN OPTIONAL ANTENNA ....................................14

CONNECTING AN EXTENSION SPEAKER .................................... 14

BASE STATION .............................................................14

VEHICLE INSTALLATION ................................................... 15

Mounting Using the Bracket ................................................. 16

Connecting DC Cable with Orange Wire ..................................... 17

SETTING UP YOUR SCANNER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

FIRST STEPS ............................................................... 18

INITIAL SETTINGS (VOLUME AND SQUELCH) ............................... 18

CONTROLS AND INDICATORS ..............................................18

UNDERSTANDING LOCATION, RANGE, AND SERVICES ..................22

SETTING LOCATION/RANGE ............................................... 23

Enter Zip/Postal Code ....................................................... 23

Auto Locate ................................................................. 24

Set Manual Location ........................................................ 24

SET UP GPS ................................................................ 24

Location Format ............................................................ 24

Set Serial Port ............................................................... 24

Set Range ................................................................... 24

EDIT LOCATION ............................................................ 24

Edit Name .................................................................. 24

Use Location ................................................................ 24

Delete Location ............................................................. 24

Set Location Information .................................................... 25

Set Range ................................................................... 25

Save Location ............................................................... 25

SELECTING SERVICE TYPES ................................................25

QUICK NAVIGATION CONCEPTS ........................................26

ASSIGNING QUICK KEYS ...................................................26

FAVORITES LIST QUICK KEYS ................................................. 26

SYSTEM QUICK KEYS ........................................................ 26

DEPARTMENT/SITES QUICK KEYS ............................................ 26

USING QUICK KEYS ........................................................26

SEARCH KEYS ..............................................................26

STARTUP KEYS .............................................................27

NUMBER TAGS ............................................................. 27

CHANNEL/ID ALERTS ......................................................27

QUICK FREQUENCY TUNING ...............................................27

QUICK TALK GROUP TUNING ............................................... 27

MENU REFERENCE ....................................................28

MANAGING FAVORITES LISTS ..........................................38

NEW FAVORITES LIST/ FAVORITES LIST OPTIONS ........................... 38

PROGRAMMING SYSTEMS .................................................39

CREATING OR EDITING A SYSTEM ............................................ 39

SYSTEM SETTINGS ......................................................... 39

CUSTOMIZING THE DISPLAY ...........................................43

SIMPLE DISPLAY MODE .................................................... 44

DETAIL DISPLAY MODE ....................................................44

SEARCH/TONE-OUT/WEATHER MODE .....................................45

AVAILABLE ITEMS .......................................................... 45

USING DISCOVERY MODE .............................................48

RUNNING A DISCOVERY SESSION .......................................... 48

REVIEWING A DISCOVERY SESSION ........................................49

USING ANALYZE FEATURES ............................................50

SYSTEM STATUS ...........................................................50

LCN FINDER ............................................................... 50

APPENDIX ............................................................52

TROUBLESHOOTING .......................................................52

DEFAULT BAND SETTINGS ................................................. 52

SERVICE TYPES ............................................................ 53

REMOVING THE MICRO SD CARD .......................................... 55

REFORMATTING THE MICRO SD CARD ..................................... 55

TYPE II SPECIAL STATUS BITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

WEATHER CHANNELS ......................................................56

SAME EVENT CODES .......................................................56

CTCSS FREQUENCIES ......................................................58

DCS CODES ...............................................................58

REVERSE LIST .............................................................. 59

REPEATER FREQUENCY LIST ...............................................59

WARRANTY INFORMATION ............................................60

USING THIS MANUAL

This manual describes the functions and features of your scanner. It assumes that you know the basic structure of radio systems and how they work. Just as a car owner’s manual does not teach you how to drive, this manual does not teach you about radio systems. There are many resources for learning about radio systems, including wiki articles, forum discussions, and YouTube videos. We encourage you to start at RadioReference.com’s discussion forums.

IMPORTANT INFORMATION

THE FCC WANTS YOU TO KNOW

IMPORTANT! This scanner has been manufactured so that it will not tune to radio frequencies assigned by the FCC for cellular telephone usage. The Electronic Communications Privacy Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or cordless telephone transmissions or to market this radio when altered to receive them. Installation, possession, or use of this scanner in a motor vehicle may be prohibited, regulated, or require a

permit in some states, cities, and/or local jurisdictions. Local law enforcement ofcials can provide

you with information regarding the laws in your community.

MODIFICATION NOTICE

Changes or modications to this product not expressly approved by Uniden, or operation of this

product in any way other than as detailed by this Users Guide, could void your authority to operate this product.

Warning: Modication of this device to receive cellular radiotelephone service signals is prohibited

under FCC Rules and Federal Law.

PART 15 INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. In Canada, a radio license must be obtained prior to possession and use of this scanner receiver.

Le présent appareil est conforme aux normes CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

GENERAL PRECAUTIONS

Before you use this scanner, please read and observe the following:

Earphone Warning

You can use an optional 32Ω stereo headset or earphone with your scanner. Use of an incorrect

earphone or headset might be potentially hazardous to your hearing. The output of the phone jack is monaural, but you will hear it in both headphones of a stereo headset.

Set the volume to a comfortable audio level coming from the speaker before plugging in the earphone or headset. Otherwise, you might experience some discomfort or possible hearing damage if the volume suddenly becomes too loud because of the volume control or squelch control setting. This might be particularly true of the type of earphone that is placed in the ear canal.

Liquid Exposure Warning

Uniden does not represent this unit to be waterproof. This product is not warranteed against water damage

SCANNING LEGALLY

Your scanner covers frequencies used by many different groups, including police and re

departments, ambulance services, government agencies, private companies, amateur radio services, military operations, pager services, and wireline (telephone and telegraph) service providers. It is legal to listen to almost every transmission your scanner can receive. However, there are some transmissions that you should never intentionally listen to. These include:

• Telephone conversations (cellular, cordless, or other private means of telephone signal transmission).

• Pager transmissions.

• Any scrambled or encrypted transmissions

According to the Electronic Communications Privacy Act (ECPA), you are subject to nes and

possible imprisonment for intentionally listening to, using, or divulging the contents of such a conversation unless you have the consent of a party to the conversation (unless such activity is otherwise illegal). This scanner has been designed to prevent the reception of cellular telephone transmissions and the decoding of scrambled transmissions. This is done to comply with the legal requirement that scanners be manufactured so they are not easy to modify to pick up these

transmissions. Do not open your scanners case to make any modications that could allow it

to pick up transmissions that are illegal to monitor. Modifying or tampering with your scanners internal components or using it in a way other than as described in this manual could invalidate your warranty and void your FCC authorization to operate it. In some areas, mobile and/or portable use of this scanner is unlawful or requires a permit. Check the laws in your area. It is also illegal in many areas (and a bad idea everywhere) to interfere with the duties of public safety

ofcials by traveling to the scene of an incident without authorization.

AVIS D’INDUSTRIE CANADA

Le présent appareil est conforme aux normes CNR d’Industrie Canada applicables aux appareils radio exempts de licence. Son utilisation est assujettie aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil ne doit accepter tout brouillage radioélectrique qu’il reçoit, même se lebrouillage est susceptible d’en compromettre le fonctionnement.

Une version française de ce guide d’utilisation est disponible sur le site Web d’Uniden au : www.uniden.com.

• Sur le site d’Uniden, sélectionnez “ Support”, puis “ Owner’s Manuals”.

• Au menu déroulant de sélection des produits, choisissez “Scanners”.

• Sélectionnez le modèle et cliquez sur le drapeau canadien.

• La version française du guide d’utilisation de ce modèle.

INTRODUCTION

The Uniden SDS200 is a digital base/mobile TrunkTracker communications receiver that incorporates the HomePatrol database of all known radio systems in the USA and Canada. Programming it can be as simple as entering your zip code. Its True I/Q™ receiver provides for improved digital performance in challenging RF environments. Its customizable color display allows access to the information you want to see.

HOW DOES THE HOMEPATROL® DATABASE WORK?

When you set your location, the scanner selects channels near that location. If you enter your zip code, the scanner searches within a 10 mile radius of the center of that zip code. If you use the Auto Locate feature, that range increases to 30 miles. If you manually enter your location or connect an optional GPS receiver, your scanner will select channels that apply to your precise location. You can adjust the selection range from 0 to 50 miles.

The database is updated weekly from RadioReference, the most comprehensive repository of radio system available. Updating the radio database in your SDS200 is as simple as connecting it to your PC and running the included Sentinel software.

WHAT YOU HEAR

Your scanner has over 10,000 police, re, ambulance, business, utility, and other agencies set for

instant access. You can also listen to weather channels and weather alerts, and you can set your scanner to monitor weather alerts.

There are some communications that the public is locked out from monitoring. Your

scanner cannot receive agencies that encrypt their communications; it also cannot receive

agencies on some private proprietary systems.

Because there are so many different kinds of communications going on, you can turn on specic

types of agencies you want to hear (and turn off those you don’t).

CREATE FAVORITES LISTS

You are not limited to using the included database. You can also create your own Favorites Lists which you can customize to your preferences.

AVOID TRANSMISSIONS

You can also select transmissions for your scanner to Avoid (ignore).

REPLAY TRANSMISSIONS

Your scanner’s Replay feature will instantly replay the transmissions you’ve just heard. You can set how long a period Replay records for instant playback. This period can range from 30 seconds to 4 minutes.

RECORD TRANSMISSIONS

With your scanner, you can record transmissions. When you begin recording, your scanner adds the Replay recording buffer to the recording. These recording sessions are saved and can be replayed on demand. Rename and delete sessions through the Review Recordings submenu.

MAIN FEATURES

HomePatrol Database – Includes all known radio systems in the US and Canada. The database is updatable with the Sentinel software and Uniden updates the main database weekly.

Customizable Color Display – You can set the display color for each eld in the display. Additionally, for many elds you can select the information provided.

True I/Q™ Receiver – Designed to improve digital performance in even the most challenging RF environments. An I/Q receiver captures the complete signal waveform in 3 dimensions, allowing for improved digital error correction and signal recovery.

Location-Based Scanning – Allows you to set your location by zip/postal code or GPS coordinates for instant reception. The Auto-locate feature will determine your general location if you don’t know where you are.

Favorites Scan – Allows you to organize your Systems into Favorites Lists. The scanner can scan any combination of Favorites Lists and the Full Database.

microSD card (provided - 1 GB up to 32 GB supported) – For storing Favorites Lists, Proles,

all your settings, Discovery sessions, and recording sessions.

GPS Compatible – Connect to a GPS receiver (not included) for precise system selection and continuing reselection when you travel. The scanner will automatically select what to scan based on your current location as provided by an external GPS unit.

Range Control – Lets you set how far out from your current location the scanner will search for channels in Favorites Lists and the database.

TrunkTracker X Operation – Scans APCO 25 Phase 1 and Phase 2, X2-TDMA, Motorola, EDACS, and LTR trunked systems, as well as conventional analog and P25 digital channels. Optional upgrades add multiple types of NXDN and DMR trunking, as well as EDACS ProVoice decoding.

Instant Replay – Plays back up to 240 seconds (4 minutes) of the most recent transmissions.

Audio Recording – Capture transmissions for later playback.

Custom Alerts – You can program your scanner to alert when you receive a Channel or Unit ID, a

Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit. For each alert, you

can select from 9 different tone patterns, 15 volume settings, 7 colors, and 3 ash patterns.

Multicolor LED Alert – The alert LED with 7 colors, Blue, Red, Magenta, Green, Cyan, Yellow, or White, can be used with your Custom Alerts.

Trunking Discovery – Monitors system trafc on a trunked radio system to nd unknown IDs and automatically records audio from and logs new channels for later review and identication.

Conventional Discovery – Searches a range of frequencies to nd unknown frequencies and automatically records audio from and logs new channels for later review and identication.

Scan by Service Types – Scan your channels by Service Type i.e. Fire, Police, Railroad, etc.

Multi-Level Display and Keypad light – Makes the display and keypad easy to see in dim light

with multiple backlight levels.

Temporary or Permanent Avoid – For Systems/Sites/Departments/Channels.

System/Channel Number Tagging – Number tags allow you to quickly navigate to a specic

Favorites List, System, or Channel.

Start-up Conguration – You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power up the scanner and press the key number, just those Favorites Lists assigned to the key will be enabled for scan.

Close Call ® RF Capture Technology – Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call Do-not-Disturb checks for Close Call activity in between channel reception so active channels are not interrupted.

Broadcast Screen – Allows the scanner to ignore search and Close Call hits on known broadcast frequencies including pager frequencies. You can also program up to 10 custom frequency ranges that the scanner ignores.

Fire Tone-Out Standby/Tone Search – Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 32 Tone-Outs. The scanner will also search and display unknown tones.

PC Programming – Use the Sentinel software to manage your scanner’s Proles, Favorites Lists, Databases, and rmware updates.

Priority/Priority w/DND Scan – priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions.

Priority ID Scan – Allows you to set priority to talkgroup IDs.

Intermediate Frequency Exchange – Changes the IF used for a selected channel/frequency to

help avoid image and other mixer-product interference on a frequency.

Individual Channel Volume Offset – Allows you to adjust the volume offset for each channel.

Congurable Band Defaults – Allows you to set the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands.

Repeater Find – Allows the scanner to try to switch to the repeater frequency if an input frequency is found.

Adjustable Scan/Search Delay/Resume – Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search.

Data Naming – Allows you to name each Favorites List, System, Site, Department, Channel, ID, Location, Custom Search, and SAME group, using up to 64 characters.

Duplicate Input Alert – Alerts you if you try to enter a name or frequency already stored.

Quick Keys – You can assign up to 100 Quick Keys to your Favorites Lists, Systems,

Departments, and Sites.

Search Avoids – You can temporarily Avoid up to 250 frequencies and permanently Avoid up to 250 frequencies in any Search mode or Close Call mode.

10 Custom Searches – Lets you program up to 10 custom search ranges.

Search with Scan Operation – Lets you include Custom Search ranges during scan operation.

3 Search Keys – You can assign 3 of the number keys to start a Custom Search, Tone-Out

Search, or Close Call Search.

Quick Search – Allows you to start searching at the displayed frequency or enter a frequency and start searching.

SAME Weather Alert/Priority – Lets your scanner alert you when a SAME alert is transmitted on a NOAA weather channel. You can also set a weather channel as a priority channel.

INCLUDED WITH YOUR SCANNER

Accessories included in the box are:

• AC Adapter

• DC Adapter

• Mobile power harness

• USB Cable

• Hand Strap

• MicroSD Card (installed)

• BNC type Telescoping Antenna

• Mounting Bracket and Hardware

• Printed Material

BASIC USAGE INFORMATION

UNDERSTANDING THE MEMORY

All information contained in the scanner is stored on a microSD card supplied with the scanner. This includes Favorites Lists, all the radio settings, and the RadioReference database.

FAVORITES LISTS

Because the memory is based on the RadioReference database, the SDS200 has a different organization unlike banks and channels in older scanners, but more like Dynamic Memory Architecture (DMA) used for the last few generations of scanners. Favorites Lists follow the RR database structure of Systems that contain Departments that hold Channels (conventional frequencies or IDs) and then Sites to hold trunking frequencies. If you are familiar with DMA scanners, think of departments as being like channel groups.

Favorites Lists let you store channels you nd when you are scanning from the full database (the

easiest way). They can contain channels from trunking systems and conventional systems. You can also manually add systems, departments and channels into Favorites Lists from the database as well as program new systems, departments, sites, and channels with the Sentinel software.

You can save up to 256 different Favorite Lists in the scanner (and software) and associate them

with any or all of your proles. You can monitor one or more Favorites Lists at a time and/or the database. You can also export your Favorites Lists to a le to share them. Deleting a prole does not delete the Favorites Lists associated with a prole. However, deleting a Favorites List does delete it from all proles.

SYSTEMS

Systems hold Sites, Departments, and Channels.

TRUNKING SITES

Inside trunked systems are sites that hold the trunking frequencies for the trunking system as well as any band plan information needed. You need at least one site for each trunked system and some systems have more than one site.

DEPARTMENTS

Departments are created inside systems. Departments hold frequencies (channels) for conventional systems and Talk Group IDs (also called channels) for trunked systems.

SENTINEL SOFTWARE

MANAGE PROFILES

Proles are “snapshots” of your scanner’s set up. A prole contains all conguration settings as well as all Favorites Lists, Avoids, and System settings. Sentinel can save multiple proles so you can restore different proles as you need them. For example, if you regularly visit a specic location, you can create a prole for that location. You can save it to Sentinel to use whenever you

visit.

MANAGE FAVORITES LISTS

You can create Favorites Lists in Sentinel then associate them with specic proles. Sentinel lets you create new systems or edit systems already in a Favorites List. When a prole is written to your scanner, only specied Favorites Lists are written to the scanner. Note that all Favorites Lists are shared by all Proles. If you delete a Favorites List, it is deleted from all proles. If you want to use a particular Favorites List in some Proles and not use it in Others, use the Download and/or Monitor settings in the Prole Editor to select your preference.

MANAGE DATABASES

Uniden updates the Database used in your scanner every week. You can decide how often you want to update the databases on your scanner. When you update them through Sentinel, it checks the website for the most current database and saves it in Sentinel. When you select Write to Scanner, the new database is updated in the scanner. Updating the main database does not update any Favorites List. Your customizations and selections are preserved.

HOW TO INSTALL SENTINEL SOFTWARE

1. Go to the scanner’s product page at Uniden.com and click the link for support les.

2. Download the latest version of Sentinel.

3. Unzip the le you downloaded, then click on setup.exe and follow the on-screen instructions

to install Sentinel.

UPDATING FIRMWARE

Your scanner updates its rmware through Sentinel. In that process, Sentinel connects to the internet and checks for the current rmware version to download.

From time to time, Uniden will release rmware updates to improve existing functionality, add new features, or address issues found in its operation. Updating the rmware takes just a few minutes

and is easily accomplished using the Sentinel Software you installed on your PC.

Simply connect your scanner to your PC using the supplied USB cable and select Mass Storage. Then, in Sentinel, select UPDATE/Update Firmware and follow the on-screen prompts.

For information about what is included in each update, see:

• http://info.uniden.com/UnidenMan4/SDS200FirmwareUpdates

UPDATING THE DATABASE

1. To update the scanner’s database, connect it to your PC using the supplied USB cable. Select Mass Storage.

2. Next, in Sentinel, select UPDATE/Update Master HPDB. This updates the database in Sentinel, but does not update the database in the scanner.

3. Finally, write the new database to your scanner by selecting Scanner/Write to Scanner.

DATA NAMING

Name any Favorites List, System, Site, Department, Channel, Location, Custom Search, Recording Session, Tone-Out, or SAME group using up to 64 characters.

To Enter a Character, turn the scroll control until the character you want appears. To move the cursor to the right, press the right soft key (>).

To move the cursor to the left, press the left soft key (<). To clear a character, press ./no.

To clear all characters, press./no twice. Press E/yes when nished to exit.

PRIORITY SCANNING

Priority Scan – When the scanner is scanning a Conventional System, it interrupts scanning, based on the Priority Interval and Max Channels settings, to check priority channels for activity. The more channels you have set to priority, the longer the interruption will be. The Favorites List(s) and System(s) containing the priority channel(s) have to be enabled (and not Avoided) or the scanner will display Priority Scan No Channel.

Priority DND – The scanner checks priority channels, based on the Priority Interval and Max Channels settings, only when not receiving other conventional channels so there is no interruption in scanning with conventional systems.

Priority ID Scan – This function is similar to conventional priority although there is no interruption during the transmission. Priority is checked in between transmissions, when the scanner is receiving the control channel, and during the channel delay period. The scanner can only look for priority IDs in the trunked system it is currently scanning.

Preemptive Priority ID Scanning – For Motorola systems that have channel priority active on the

system, if you ag a channel as priority and the system also has that TGID identied as a priority

channel, the scanner will preempt any current transmission if the TGID becomes active.

The highest priority is for channels in System Quick Key 0. The lowest priority is for channels in System Quick Key 99. Priority for priority channels in the same channel Department follows the order in which the channels were created.

To use Priority Scan, you must rst set your Priority Channels.

To use Priority ID Scan, you must also enable Priority ID Scan for each system.

To toggle Priority Modes, press Func then ./no(Pri).

Priority is always on for a trunked system, if enabled in the system.

SCANNING ORDER

With previous scanners, you selected banks to scan. With this scanner, you select Favorites Lists, Systems, Departments, and Sites to scan by assigning Quick Keys to them.

Scanning is performed in a mixture of FLQK order and SQK order. The scanner does not scan all Systems in one Favorites List and then move to the next List.

For each Favorites List with a quick key, starting with 0, the scanner scans each 0 SQK in FLQK order and then move sto the next set of SQKs for each list.

Example:

FLQK 0, SQK 0; FLQK 1, SQK 0…. FLQK 98, SQK 99; FLQK 99, SQK, 99. Department and Site Quick Keys are scanned with each System.

Systems with the same quick key are scanned in order of creation.

The Database is scanned next. Then, Systems with no quick key (including created Quick Save Systems) are scanned and in order of creation.

Conventional Channels and Departments within Systems are also scanned in order of creation. TGIDs are not really scanned. The scanner checks for any activity in the trunking system and:

• Stops on all unavoided TGIDs when ID Search mode is set to On.

• Stops only on programmed TGIDs when ID Search mode is set to Off.

Next, any Custom Searches (enabled for Search with Scan) are scanned in order (Close Call Hits last).

Then, the scanner scans the Close Call ‘Hits with Scan’ system (if Unavoided). This is a system that automatically stores the frequencies found by Close Call. If the ‘Hits with Scan’ system has no frequencies, the scanner does not scan the system.

The scanner scans a system for the duration you set using the System Hold Time option. For trunked systems, the scanner moves to the next system after the hold time expires, the current transmission ends, and the channel delay expires. Conventional systems operate similarly, but all (Unavoided) channels are scanned at least one time regardless of the hold time setting.

SCANNING

Scanning Checklist:

To ensure you do not get a “Nothing to Scan” message on the scanner:

1. You must enable at least one Favorites List or the Full Database in Select Lists to Monitor.

2. Favorites Lists or Systems, with Quick Keys assigned to them, must be enabled with quick keys or through Manage Quick Key Status.

3. Service Types required for channels must be set to On.

4. You must set your location to an area that has channels to scan, or set one or more Favorites Lists to not use Location Control.

Any Favorites List not assigned to a quick key, not Avoided, with channels within your current location and range and set to On in Select – to Monitor will be scanned. Any System, Department, or Site (or Quick Save System/Department) not assigned to a quick key and not Avoided, will be scanned.

REPLAY THE LAST TRANSMISSIONS

While scanning, press Replay.

Press Channel to pause/resume replay.

Turn the Scroll Control to select recordings.

Replay is not available when recording is enabled.

START/STOP RECORDING

While scanning, press Func (the main scroll knob) then Replay/Record.

Resets to Off when you turn off the scanner.

Note that anything in the replay buffer is also stored with the recording session when you start recording.

AVOIDING CHANNELS, DEPARTMENTS, SITES, AND SYSTEMS

Temporary Avoids are cleared when you cycle power. You must manually clear permanent avoids.

Channel Avoid

When the Channel is in the display or in Channel Hold mode: To Temporary Avoid, press AVOID once. To Permanent Avoid, press twice when the channel is in the display or in Channel Hold mode.

Department Avoid

Press Dept (Soft Key 2) then AVOID once to Temporary Avoid. Press Avoid twice to Permanent Avoid.

Site Avoid

To Temporary Avoid, press F+Site (Soft Key 2) then quickly press Avoid.

To Permanent Avoid, press F+Site (Soft Key 2) then quickly press Avoid twice.

To Stop Avoiding, press F+Site (Soft Key 2) then Avoid once.

System Avoid

Press System (Soft Key 1) then AVOID once to Temporary Avoid. Press AVOID twice to Permanent Avoid.

HOLDING A SYSTEM, DEPARTMENT, SITE, OR CHANNEL

While scanning, you can hold on a system, department, site, or channel by pressing its associated soft key.

System Hold: Soft key 1

Department Hold: Soft key 2

Site Hold: F+Soft key 2

Channel Hold, Soft key 3

Note: If you hold on a channel that is in a trunked system, all enabled sites are still scanned for that channel activity.

INSTALLING YOUR SCANNER

The SDS200 can be placed on a convenient surface in your home as a base station, and connected to a standard outlet that supplies 120VAC, 60Hz. You must use either the supplied antenna or an electrically correct outdoor antenna, properly and safely mounted at your chosen site.

The unit can also be placed above, beneath, or in the dash of your vehicle using the supplied bracket and mounting hardware.

• If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source.

• Do not use the scanner in high-moisture environments such as the kitchen or bathroom. Avoid placing the scanner in direct sunlight or near heating elements or vents.

POWER RELATED ISSUES

Important: To prevent memory from being corrupted, do not unplug the AC adapter during the time the memory is accessed for programming or auto store.

Note 1: If when you connect the AC adapter the [VOL] /Power Switch is ON, the scanner

may not power on. Should this occur, simply turn the control OFF, then ON again.

Note 2: When you turn off the scanner using the power switch, the scanner remembers the

last settings and mode. When you turn power back on, it resumes the previous mode.

CONNECTING AN OPTIONAL ANTENNA

The scanner’s BNC connector makes it easy to connect a variety of optional antennas, including an external mobile antenna or outdoor base station antenna.

Note: Always use 50-ohm, RG-58, or RG-8, BNC terminated coaxial cable to connect

an outdoor antenna. If the antenna is over 50 feet from the scanner, use RG-8 low-loss

dielectric coaxial cable. Cable loss increases with higher frequency.

CONNECTING AN EXTENSION SPEAKER

In a noisy area, an optional amplied extension speaker, positioned in the right place, might

provide more comfortable listening. Plug the speaker cables 1/8-inch (3.5-mm) mini-plug into your scanners back-panel Ext. Sp. Jack.

WARNING! If you connect an external speaker to the scanner’s Ext. SP jack or headphone

jack, never connect the audio output line to a power supply and ground. This might also damage the scanner.

All audio output is Class-D amplied (PWM). Never connect Ext. SP jack or headphone jack to an external Class-D AMP.

BASE STATION

This is the simplest approach to let you get started quickly. Decide on a location that is convenient to a nearby wall outlet, has desk space to let you complete your programming worksheets, will safely allow the indoor antenna to be extended, or near a window to use an outdoor antenna.

+ 46 hidden pages