Uniden America UB371 User Manual

BC345CRS
Owner’s Manual
© 2013 Uniden America Corporation Printed in Vietnam Fort Worth, Texas U01UB371ZZZ(0)
PRECAUTIONS
Before you use this scanner, please read and observe the following. IMPORTANT! This scanning radio has been manufactured so that it will not tune to the radio
frequencies assigned by the FCC for cellular telephone usage. The Electronic Communications Privacy Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or cordless telephone transmissions or to market this radio when altered to receive them. The installation, possession, or use of this scanning radio in a motor vehicle may be prohibited, regulated, or require a permit in certain states, cities, and/or local jurisdictions. Your local law enforcement officials should be able to provide you with information regarding the laws in your community.
Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, could void your authority to operate this product.
EARPHONE WARNING!
You can use an optional 32Ω stereo headset or earphone with this scanner.
Use of an incorrect earphone or stereo headset might be potentially hazardous to your hearing. The output of the phone jack is monaural, but you will hear it in both headphones of a stereo headset.
Set the speaker volume to a comfortable level before plugging in either a
monaural earphone or a stereo headset of the proper impedance (32Ω).
Otherwise, you might experience some discomfort or possible hearing damage if the volume suddenly becomes too loud because of the volume control or squelch control setting. This is particularly true for the type of earphone that is placed in the ear canal.
WARNING: Uniden does not represent this unit to be waterproof. To
reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture.
Uniden Corporation.
Other trademarks used throughout this manual are the property of their respective holders.
Important: If you use the supplied AC adapter to power the scanner but have not installed batteries in the scanner, never turn the scanner off by disconnecting the AC adapter or unplugging it from the AC outlet. This might corrupt the scanner’s memory. Always use POWER to turn the scanner off before disconnecting AC power.
2
® and Bearcat® are registered trademarks of Uniden America
CONTENTS
PRECAUTIONS ............................................................................ 2
THE FCC WANTS YOU TO KNOW ................................................. 5
Scanning Legally ............................................................................ 5
WHAT'S IN THE BOX ................................................................... 6
INTRODUCTION .......................................................................... 7
Band Ranges .................................................................................. 7
USA Bands ................................................................................. 7
Canada Bands ............................................................................ 8
CONTROLS ................................................................................ 11
Controls ....................................................................................... 11
Display ..................................................................................... 16
SETTING UP THE SCANNER ....................................................... 18
Connecting Power ....................................................................... 18
Connecting an Antenna ............................................................... 19
Using the Backlight ...................................................................... 19
USING THE CLOCK ..................................................................... 20
Setting the Current Time ............................................................. 20
Setting the Alarm Time ................................................................20
Using Snooze ............................................................................... 21
Listening to AM/FM Channels .................................................. 21
Directly Selecting a Channel ........................................................ 21
Using AM/FM Channel Memory ..................................................21
Setting up Sleep Mode ................................................................ 22
Using the Scanner Memories .................................................... 22
Programming Memories .............................................................22
Selecting a Channel ..................................................................... 23
Scanning Memory Banks ............................................................. 23
Locking/Unlocking CHANNELS .....................................................23
Using Priority Scan.......................................................................24
Setting Channel Delay .................................................................24
SEARCHING FOR ACTIVE FREQUENCIES ..................................... 24
Using Limit Search ....................................................................... 24
Programming the Limit Search Range Upper/Lower Limits ....25
Searching the Selected Range ................................................. 25
Holding on a Frequency within the Limit Search Range .......... 25
Search Lockouts ...........................................................................25
To unlock all frequencies .............................................................25
3
Listening to Service Channels.................................................... 26
Using Service Search ...................................................................26
Selecting a Service to Search ................................................... 26
LISTENING TO WEATHER CHANNELS ......................................... 27
Weather Alert Detection ............................................................. 27
CARE AND MAINTENANCE ........................................................ 27
General use ................................................................................. 27
Location ....................................................................................... 27
Cleaning ....................................................................................... 27
Repairs ......................................................................................... 28
Birdies .......................................................................................... 28
Resetting the Scanner (Clearing all Memories) ........................... 28
TECHNICAL SPECIFICATIONS ..................................................... 28
ONE-YEAR LIMITED WARRANTY ............................................... 29
4
THE FCC WANTS YOU TO KNOW
This scanner has been tested and found to comply with the limits for a scanning receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This scanner generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation. If this scanner does cause harmful interference to radio or television reception, which can be determined by turning the scanner on and off, you are encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the scanner and the receiver
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
SCANNING LEGALLY
Your scanner covers frequencies used by many different groups, including police and fire departments, ambulance services, government agencies, private companies, amateur radio services, military operations, pager
services, and wireline (telephone and telegraph) service providers. It is legal
to listen to almost every transmission your scanner can receive. However, there are some transmissions that you should never intentionally listen to. These include:
• Telephone conversations (cellular, cordless, or other private means of
telephone signal transmission)
• Pager transmissions
• Any scrambled or encrypted transmissions
According to the Electronic Communications Privacy Act (ECPA), you are
subject to fines and possible imprisonment for intentionally listening to, using, or divulging the contents of such a conversation unless you have the consent
of a party to the conversation (unless such activity is otherwise illegal). This
scanner has been designed to prevent the reception of cellular telephone transmissions and the decoding of scrambled transmissions.
This is done to comply with the legal requirement that scanners be manufactured so they are not easy to modify to pick up these transmissions. Do not open your scanner’s case to make any modifications that could allow it to pick up transmissions that are illegal to monitor. Modifying or tampering with your scanner’s internal components or using it in a way other than as described in this manual could invalidate your warranty and void your FCC
5
authorization to operate it. In some areas, mobile and/or portable use of this scanner is unlawful or requires a permit. Check the laws in your area. It is
also illegal in many areas (and a bad idea everywhere) to interfere with the
duties of public safety officials by traveling to the scene of an incident without authorization.
WHAT'S IN THE BOX
Please unpack the box carefully and make sure you have:
FIR
SEARCH
BC
345
CRS
1-50 51-100 101-150
1 2 3
151-200 201-250 251-300
4 5 6
301-350 351-400
7 8 9
. 0 E
L/O DELAY PRI SVC
FM2 MEM DIRAM
FM1
Weather
Scanner
AM/FM
MODE
Sleep
401-450
SCAN
HOLD
451-500
POWER
Light
PGMCLR
Clock Set
Alarm Set
SQUELCH
SNOOZE
Radio
Tone
Clock
Off
AlarmTime
VOLUME
BC345CRS Scanner Telescoping Antenna AC Adapter
Not Shown:
• Other Printed Materials
• This Owner's Manual
AM Loop Antenna
If any item is missing or obviously damaged, call the Uniden Parts Dept at
(800) 297-1023 Monday through Friday, from 8:00 AM to 5:00 PM or online at
www.uniden.com to remedy the situation.
6
INTRODUCTION
Your BC345CRS scanner is a multi-featured conventional channel scanner.
You can easily enter and store frequencies for police, fire/emergency, marine, air, HAM, and other radio services into 500 channels distributed over ten banks. The scanner also lets you listen to NOAA (National Oceanic and
Atmospheric Administration) weather broadcasts for valuable information
specific to your location. Use your scanner to monitor:
• Analog public safety channels
Police and fire departments (including rescue and paramedics)
• NOAA weather transmissions
• Business/Industrial radio and utilities
Marine and amateur (ham radio) bands
Aircraft (commercial and private) band
• Railroad
• AM/FM Broadcast Stations
BAND RANGES
Your BC345CRS can operate using the common band steps used in the USA or Canada. To select a band plan:
1. Disconnect power to the scanner; remove batteries if they are installed.
2. For USA bands, press 1 while reconnecting power. For Canada bands, press 2 while reconnecting the power.
USA Bands
Band
No.
1 0.53000 - 1.70000 10.0 AM AM Broadcast
2
3
4
5
6 88.00000 - 107.90000 100.0 FMB FM Broadcast
7 108.00000 - 136.99166 8.33 AM Aircraft Band
Range (MHz) Step
(kHz)
25.00000 - 27.99500 5.0 AM AM Band
28.00000 - 29.99500 5.0 NFM 10 Meter
30.00000 - 49.99500 5.0 NFM VHF Low Band
50.00000 - 54.00000 5.0 NFM 6 Meter Amateur Band
Mode Service
Amateur Band
7
Band
No.
8 137.00000 - 150.77000 5.0 NFM Military Land Mobile
9 225.00000 - 380.00000 12.5 AM Military Air Band
10 406.00000 - 419.99375 6.25 NFM Fed. Gov. Land Mobile
11 420.00000 - 449.99375 6.25 NFM 70cm Amateur Band
12 450.00000 - 469.99375 6.25 NFM UHF Standard Band
13 470.00000 - 512.00000 6.25 NFM UHF TV*
* This scanner cannot decode the digital TV transmissions in use on most channels.
Range (MHz) Step
(kHz)
150.77500 - 150.81250 7.5
150.81500 - 154.45250 7.5
154.45625 - 154.47875 7.5
154.48250 - 154.51250 7.5
154.51500 - 154.52500 5.0
154.52750 - 154.53500 7.5
154.54000 - 154.60750 7.5
154.61000 - 154.64750 7.5
154.65000 - 157.44750 7.5
157.45000 - 157.46500 5.0
157.47000 - 163.24500 7.5
163.25000 - 173.20000 12.5
173.20375 - 173.21000 6.25
173.21500 - 173.22000 5.0
173.22500 - 173.38750 12.5
173.39000 - 173.39625 6.25
173.40000 - 174.00000 5.0
Mode Service
2 Meter Amateur Band VHF High Band Federal Government
Canada Bands
Band
No.
1 0.53000 - 1.70000 10.0 AM AM Broadcast
2
3
4
8
Range (MHz) Step
(kHz)
25.00000 - 27.99500 5.0 AM AM Band
28.00000 - 29.99500 5.0 NFM 10 Meter
30.00000 - 49.99500 5.0 NFM VHF Low Band
Mode Service
Amateur Band
Band
No.
5
6 88.00000 - 107.90000 100.0 FMB FM Broadcast
7 108.00000 - 136.99166 8.33 AM Aircraft Band
8 137.00000 - 174.00000 5.0 NFM Military Land Mobile
9 225.00000 - 380.00000 12.5 AM Military Air Band
10 406.00000 - 419.99375 6.25 NFM Fed. Gov. Land Mobile
11 420.00000 - 449.99375 6.25 NFM 70cm Amateur Band
12 450.00000 - 469.99375 6.25 NFM UHF Standard Band
13 470.00000 - 512.00000 6.25 NFM UHF TV*
* This scanner cannot decode the digital TV transmissions in use on most channels.
Range (MHz) Step
(kHz)
50.00000 - 54.00000 5.0 NFM 6 Meter Amateur Band
Mode Service
2 Meter Amateur Band VHF High Band Federal Government
Features
Channel Memory Scanning — Scans frequencies you have stored in any of
the channels or banks at a rate of up to 90 channels per second. Memory Availability — Store and scan any of up to 500 channels distributed
over 10 banks. Direct Channel Access — Press 0-9 and HOLD to directly access any stored
frequency.*
Channel Lockout— Skip over stored frequencies (channels) using the
Lockout feature to enable faster scanning. Alarm Clock with Snooze — provides standard radio broadcasts that you
can set as your alarm sound. AM/FM Broadcast — lets you store and search up to 30 preset broadcast
channels (10 AM and 20 FM) for quick access.
Priority Channel — Designate a specific frequency as a Priority Channel. Then the radio scans and checks that channel every 2 seconds. Select and
designate up to 10 frequencies as Priority Channels (one per bank).
Priority DND — Indicates that no priority checks will be made while receiving a transmission.
Duplicate Channel Alert — Lets you know that a selected frequency has already been programmed into memory if you attempt to store it again.
9
Limit Frequency Searching — Lets you designate lower and upper frequency range and search within that range for active frequencies. You can then store frequencies in memory as channels for later recall.
Skip Frequency — Skips non-favorite frequencies during Service Search and
Limit Search. Up to 50 frequencies can be designated as skip frequencies. Service Search — Lets you designate one of the five preprogrammed service
channels (Police, Fire/EMS, Air, Ham, Marine) to search.
Weather (WX) Scan — Scan the preprogrammed weather channels. Weather Alert Detection — The scanner sounds an alert tone if it detects a
weather alert while in Clock mode.
Scan and Search Speed
• Scan Speed. 100 channels per second maximum in Scan mode.
• Search Speed. 100 steps per second maximum in Search mode.
• Turbo mode. For frequency steps 5kHz apart, searching occurs in Turbo mode which is 300 steps per second.
Clock Display — the scanner, in standby mode, displays the time. The clock also features an alarm that can sound up to 20 minutes or be shut off manually. A convenient snooze button lets you silence the alarm for an
extra 5-minutes. Delay — you can enable or disable the 2-second delay to resume scanning
when a transmission ends. Enabling this feature helps prevent missing a response from one of the parties in the transmission.
LCD Backlight — you can enable or disable the LCD back lighted display. Key Touch Tone — a tone sounds to confirm you have made a valid key
input while a different tone sounds to alert you to an invalid entry.
EEPROM Memory Backup — the scanner uses a non-volatile EEPROM for
memory backup. Battery Alert — A battery icon alerts you to a no battery installed condition,
and a battery low voltage condition. An alert tone sounds when the battery needs to be replaced. The backup provides backup for the clock when power is off and will power scanning for a short time.
Auto Power Off — turns the scanner off when the battery power gets too low.
Sleep Mode - Automatically turns the scanner off after a preset time period.
.
10
CONTROLS
SPEAKER
23
CONTROLS
16
15
14
13
12
11
10
17
18
19
3
9
8
7
6
4
5
2
1
20 21 22
Number Key/Knob What it does
1 VOLUME Increases and decreases volume. 2 SQUELCH Lets you set the signal level required to receive a transmission.
Counter-clockwise = Open. If you open the squelch all the way, you will hear hissing between transmissions. This lets you hear weak signals, but prevents scanning.
Clockwise = Close. As you close squelch, a stronger signal is required to stop scanning and open audio. You normally set the control to a point just where hissing on all channels stops between transmissions.
3 SCAN press to begin scanning the channels or to resume scanning. 4 Alarm slide
switch
Set to Off to disable alarm; Set to Radio to enable the radio alarm; Set to Tone to enable the tone alarm
11
Number Key/Knob What it does
5 SNOOZE/
Light
Snooze: Press while the alarm sounds to silence the alarm for 5 minutes.
Light: Tap to turn on the backlight for 15 seconds. Press and hold to turn the LCD backlight on permanently. Press and hold again to turn off the backlight.
6 Time slide
switch
Use to select your desired operation: Alarm Set; Clock Set; Clock.
7 HOLD/Sleep HOLD: press to temporarily stop scanning, limit searching, or
weather scanning and remain on the channel. The scanner displays the channel on hold. Press again to resume searching or scanning.
Sleep: Press and hold to set how long the unit will remain on before it turns itself off.
8 E/PGM Program mode: Press to enter the Program mode. Then:
3. Enter the desired frequency using the numeric keys.
4. Press E/PGM to store that frequency into the memory. In Limit Search mode, Press
E/PGM after entering the
frequency to program the upper and lower frequency limits.
9 0 to 9 - Press a numeric key to enter a frequency.
- Press a numeric key to change a channel (Direct Channel Access feature)
- Press a numeric key to enable or disable a channel banks. These channel banks display across the top of the LCD.
10 Power Press to turn power on and off. The time displays when power
is off (Standby mode).
11 ./Clr - Press to input a decimal point when you enter a frequency.
- Press to cancel a numeric key input
(
0 to 9)
- Press to clear an error display.
12 SEARCH/AMIn Scanner mode: Press to start a Limit Search or to resume
searching. In AM mode: Press to select the AM memory bank. In Service Select mode: Press to select POLICE service.
12
Number Key/Knob What it does
13
L/O FM1
14
DELAY/FM2
15
PRI/MEM
16 SVC/DIR - In Scanner mode press to change to Service Search mode.
17
MODE Switch Use to select the desired mode: AM/FM; Weather; Scanner.
In Scanner mode:
- Press to lock or unlock a channel memory in SCAN (HOLD) or PROGRAM mode.
- Press to set or clear the frequencies in the skip Frequency list in the Limit Search (HOLD) and Service Search (HOLD) modes.
In AM/FM mode, press to select the FM1 memory bank. In Service Select mode: Press to select the FIRE/EMS service. Press and hold to unlock all registered channels or frquencies
in the following modes:
- Scan Hold (unlock all registered channels in the selected bank)
- Program
- Service Search Hold
- Limit Search Hold
- In Scanner mode, press to turn the delay option on/off.
- In AM/FM mode, press to select the FM2 memory bank.
- In Service mode, press to select AIR service.
- In Scanner mode, press to set a Priority channel for Scan Hold mode and Program mode.
- In Program mode, press to set the Priority channel setting. In SCAN and SCAN HOLD, press to set Priority Scan on or off.
- In AM/FM mode, press to select Memory mode to allow quick channel recall using the 0-9 keys.
- In Service mode, press to select HAM service.
- In AM/FM mode, press to change to Direct Entry mode to allow channel frequency selection using the up / down arrows or 0-9 keys.
- In Service mode, press to select MARINE service.
(Slide switch must be set to Clock)
13
Number Key/Knob What it does
18
Press once to:
- Decrease one channel in these modes:
x Scan Hold x Service Search Hold x WX Hold x Program Hold
- Decrease one frequency in Limit Search Hold mode and Direct entry in Radio mode.
- Decrease time in Time Setting and Sleep mode.
Press and hold to:
- Rapidly decrease channels in these modes:
x Scan Hold x Service Search Hold x WX Hold x Program Hold
- Rapidly decrease frequencies in Limit Search Hold mode and Direct entry in Radio mode.
- Rapidly decrease time in Time Setting and Sleep mode.
19
Press once to:
- Increase one channel in these modes:
x Scan Hold x Service Search Hold x WX Hold x Program Hold
- Increase one frequency in Limit Search Hold mode and Direct entry in Radio mode.
- Incerase time in Time Setting and Sleep mode.
Press and hold to:
- Rapidly increase channels in these modes:
x Scan Hold x Service Search Hold x WX Hold x Program Hold
- Rapidly increase frequencies in Limit Search Hold mode and Direct entry in Radio mode.
- Rapidly increase time in Time Setting and Sleep mode.
20
Power jack
DC IN power input jack
14
Number Key/Knob What it does
21
HEADPHONE jack
connects a headphone for privacy or an external speaker.
If you connect an external speaker to the
scanner's headphone jack, never connect the audio output line to a power supply and ground. This might damage the scanner.
22
23
PC I/F
Antenna Connectors
Update firmware through this PC connection.
Connect an external antenna using a BNC connector. AM RADIO ANT connector — connect the supplied loop antenna and position it for best AM Broadcast radio reception.
Display
3
1
17
1416
15
14
13
2
12
11
5
4
10
6
7
8
9
Number Display What it means
1 1 to 10 Scan mode: indicates Channel memory Bank
AM/FM mode: indicates a radio station
2 L/O Indicates a Locked Out channel or to skip a frequency while
searching
3 SRCH Displays in Limit Search and Service Search modes
Radio mode: Indicates Direct Entry mode
4 DELAY Indicates a 2 second set delay for a channel before scanning
resumes
5 PGM Indicates Program mode
6 Battery Solid: Battery power is full
Flashes when the battery power is low. Non-flashing: no battery installed
15
Number Display What it means
7 HOLD Indicates a hold in Scan, Search, WX, and Direct Entry mode
8 25, 33, 50, 66, 75One of these numbers displays to indicate the frequency step.
For example, "25" indicates 0.25kHz.
9 MARINE Indicates searching commercial and private watercraft
communications
10 HAM Indicates searching amateur radio services
11 AIR Indicates searching commercial and private Air
communications
12 FIRE/EMS Indicates searching the Fire or Emergency Medical Services
13 AM/PM
P M
14 POLICE Indicates a Police service search
15 WX Indicates the Weather channel
16
PRI
PRI
17 ALARM Indicates the alarm is enabled. Flashes when alarm sounds or
Indicates AM/PM and appears in Clock mode The letter "P" indicates a Priority channel in Scan mode. The letter "M" indicates the Minute setting in Sleep Time Set
mode.
Indicates that the Priority channel scan is active. Reversed indicates that Priority channel DND is active.
if Snooze is selected
Notes:
The backlight turns off automatically after 15 seconds from the last key stroke
(if not permanently turned on).
The scanner sounds special tones as follows:
• to confirm key entry.
• to indicate an error in key entry.
• to indicate low battery voltage.
16
SETTING UP THE SCANNER
These guidelines will help you install and use your new scanner:
• If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source. You might also try changing the height or angle of the antennas.
• Use an optional mono earphone or mono headset with proper impedance for private listening.
Do not use the scanner in high-moisture environments such as in the kitchen or bathroom.
• Avoid placing the scanner in direct sunlight or near heating elements or vents.
CONNECTING POWER
1. Insert the supplied AC Adapter’s barrel plug into the power jack on the back of the scanner. Then plug the Adapter into a standard household outlet that supplies 120V AC, 60Hz. The scanner goes into Power Off mode and the clock displays.
# Do not plug the adapter into a
switch controlled outlet.
2. Open the battery compartment and insert 3 AA batteries. Be sure to note the polarity markings in the battery compartment. You can use either alkaline or rechargeable batteries, but the scanner will not recharge batteries in the compartment.
• Use only fresh alkaline AA batteries. Rechargeable batteries can be used, but battery life is shorter than with alkaline batteries.
• Always remove old or weak batteries. Batteries can leak chemicals that destroy electronic circuits.
• Do not mix old and new batteries, different types
of batteries (standard, alkaline, or rechargeable)
or rechargeable batteries of different capacities.
# Batteries are intended to provide backup power for the clock and for
scanning for a short time. When the backup batteries becomes too low,
3. When you either install batteries or connect the AC Adapter to a standard
US wall outlet, the scanner powers on and goes to STANDBY mode. The
appears. Promptly replace the batteries.
17
display shows the initial clock time of 12:00 AM. The scanner remains in
STANDBY mode.
CONNECTING AN ANTENNA
The scanner uses an external loop antenna to receive AM broadcast stations and an external telescopic antenna to receive all other signals. Connect the supplied rod antenna by pushing the antenna’s connector onto the antenna jack on the back of the scanner and twisting it to the desired angle. Connect the two wires from the loop antenna to the AM RADIO ANT terminals on the back of the scanner.
You can also use an external antenna (not supplied) to help to bring in weaker signals. Use RG58, 50-Ohm lead with a BNC connector to connect
the antenna to the scanner. Connect and mount the antenna according to the instructions provided with the antenna.
CAUTION: Be sure to follow all safety warnings provided with the antenna. Failure to do so could expose you to risk of injury or death and could severely damage the scanner.
USING THE BACKLIGHT
To turn on the backlight for 15 seconds, tap SNOOZE/Light. To turn on the backlight permanently, press and hold SNOOZE/Light for over 2 seconds. To turn off the backlight, press and hold SNOOZE/
Light again.
18
USING THE CLOCK
L
Your scanner’s clock displays whenever you turn off the radio functions. It can also be used as a standard alarm clock.
SETTING THE CURRENT TIME
Follow the steps to set the current time:
1. Move the slide switch to Clock Set. The hour
digits flash.
2. Press
3. Press
4. Press
# Seconds resets to zero (0) when you reset the time.
or ▼ to change the hour by one hour
increments or press the number keys to select the present hour. Then press E/PGM to set the hour. The minutes digits flash.
or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. The seconds reset to 00. Press E/PGM,
and then move the slide switch to Clock. The scanner exits the clock setting mode.
AM/PM
or ▼ to move from AM to PM and back. Make your selection,
flashes.
SETTING THE ALARM TIME
Follow these steps to set the alarm time:
1. Move the slide switch to Alarm Set. The
hours digits flash.
2. Press
3. Press
4. Press
To have the BC345CRS alert you at the preset time, slide Off/Radio/Tone to either Radio or Tone. If you set the selector to Radio, the alarm will sound with the
selected audio source (AM/FM, Scanner, or Weather).
If you set the selector to Tone, the scanner will sound a tone at the preset time. To silence the alarm, slide Off/Radio/Tone to Off. If you do not turn off the
or ▼ to change the hour by one hour
increments or press the number keys to select the present hour. Then press E/PGM to set the hour. The minutes digits flash.
or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PGM to set the minutes. The
your selection. To lock in the alarm time, move the slide switch to Clock.
AM/PM
or ▼ to move from AM to PM and back. Press E/PGM to make
display icon flashes.
L
L
19
alarm, it will sound for 20 minutes, then reset to alert you again the following day.
USING SNOOZE
When the alarm sounds, press the snooze bar to silence the alarm for 5 minutes.
LISTENING TO AM/FM CHANNELS
To listen to AM/FM channels, slide the mode selector to AM/FM when power is on. Press the button at the top of the scanner to select the desired source
(AM for AM Broadcast, FM1 or FM2 for FM). Radio stations are programmed into 30 channels - 10 for AM and 20 for FM (FM1 and FM2).
DIRECTLY SELECTING A CHANNEL
Press SVC/DIR to select the direct entry mode. Use the ▲/▼ buttons to step through the selected band. The scanner stops on active channels.
You can also enter the channel frequency using the
keypad, enter the channel frequency (for FM or AM)
and press E.
Sleep
L
Sleep
USING AM/FM CHANNEL MEMORY
Your scanner has 30 AM/FM channels for quick
channel recall (10 for AM, 20 for FM1/FM2).
To store a channel into memory:
1. Select the band (AM, FM1 or FM2).
2. Directly select the channel you want to store (see
above).
3. While listening to the channel, press and hold the number button that corresponds to the channel you want to save the channel into for 2 seconds. The scanner switches to the Memory mode for the current band.
To quickly recall a channel:
1. Select the band (AM, FM1 or FM2).
2. Select the channel memory mode by pressing PRI/MEM.
20
Loading...
+ 44 hidden pages