Uniden TL16-DV, TL22-DV, TL19-DV Owner's Manual

TL16-DV
TL19-DV
TL22-DV

LED TV/DVD Combo

For more exciting new products please visit our website:

Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

Caution and Safety Information

2

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

This symbol alerts to the presence of un-insulated “dangerous voltage” within

the product’s enclosure that may be of sufcient magnitude to constitute a risk of
serious injury or electric shock.

This symbol indicates an important note regarding operation is described here.

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and

components which can be recycled and reused. This symbol means that

electrical and electronic equipment, at their end-of-life should be disposed of

separately from your household waste. Please dispose of this equipment at your
local community waste collection/recycling center. Please help us to conserve

the environment we live in!

To ensure reliable and safe operation of this equipment, please read carefully all the instructions

in this user guide, especially the safety information below.

Electrical Safety

• To prevent overload, don’t share the same mains supply socket with too many other items of
equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items on the leads, which may damage them.

- Hold the Mains plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial (if

outdoor) and mains power from the supply.

- The PCB of the TV is conformal coated to prolong electrical function in marine

environments.

- Do not allow water or moisture to enter the TV. Do NOT use in wet or moist areas such as

Bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if:

- the mains plug or cable is damaged.

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.

- anything accidentally penetrates the ventilation slots.

- the set does not work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside.You may

invalidate the warranty. Qualied personnel only are permitted to service this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.

- Do NOT break open or throw exhausted batteries on a re.

Physical safety

• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure
at least 5cm (2”) clearance all around the unit.

• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good care of
the remote control, do not drop it or allow it to come into contact with liquids.

• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based uids. For stubborn
stains, you may use a damp soft cloth with diluted detergent.

Caution and Safety Information 2
Contents 3
Included in the Box 4
Controls and Indicators 4
Connectors 5
Remote Control 6
Basic Operation 8

Power on/off 8
Initial Start-up and Tuning Channels 8
Selecting an Input Source (TV, DVD etc) 8
Viewing Channels 9

The Channel Display Plate 9
Freeview EPG: Electronic Programme Guide 10

Recording TV Programs 11
Timeshifting (live pause) TV programs 11
Remind/Record Schedule 12
Menu Settings 13
Picture menu 14
Sound menu 14
Channel menu (In DTV mode) 15
Channel Management 15
Favourite Management 15
Country 15
Auto Search 16
DTV Manual Search 16
ATV Manual Search 16

Feature menu 17
Lock 17

Language 18
Clock 18
Sleep Timer 18
Auto Power Off 18
Hearing Impaired 18
PVR/Timeshift 19
Setup menu 21
DVD Operation 22
Selecting DVD Mode (INPUT) 22
Inserting a DVD Disc 22
Playing a DVD 22

DVD Setup Mode 23
Viewing Multimedia Content from a USB Drive 25

Basic Operation 25

Trouble shooting 28
Specications 29
Warranty 31

Contents

3

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Included in the Box

4

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Manual Controls

INPUT: Display the input

source menu.

MENU: Display/exit the

OSD menu.

CH+/-: Scan through

channels.

VOL+/-: Adjust the

volume.

PLAY: Play DVD content
EJECT: Eject DVD disc
POWER: Turn on/standby

the TV set.

If any items are missing or damaged, contact your place of purchase immediately.

Never use damaged products!

Controls & Indicators

• Owner’s Manual

• TV Stand Installation guide

LED TV/DVD

(TL16-DV, TL19DV, TL22-DV)

Remote Control Stand and Screws

AC Adaptor

Mounting Bracket

and Screws

DC Cable

Power Indicator LED & IR

receiver lens for Remote Control

Connectors

5

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

NOTE

DVD insert and eject is only available when power is on AND source

INPUT is set to DVD.

1

12-24VDC POWER

2

Headphone out

3

PC Audio Input

4

VGA (PC) Input

5

Video (AV) Input

6

L/R Audio Inputs

(for AV or YPBPR video)

7

Coaxial Out

8

HDMI Input

9

USB (Media) Input

10

RF

11

Component Input (Y)

12

Component Input (PB)

13

Component Input (PR)

14

DVD disc input

8

9

10

11

12

13

14

1 2 3 4 5 6 7

6

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Remote Control

The remote control uses infra-red (IR). Point it towards
the front of the TV at the power indicator lens. The
remote control may not work correctly if it is operated
out of range or out of angle.

POWER: Turn the TV on/standby.
INPUT: Press to display the input source menu.
PICTURE: Select the picture mode.
SOUND: Select the sound mode.
SLEEP: Standby timer.
ASPECT: Change the screen display mode.
NUMBER BUTTONS: Press 0-9 to select a TV channel

directly when you are watching TV.

: Return to the previous channel viewed.

FAV: Display the favorite program list.
MUTE: Press to mute the sound, press again or press

VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode
VOL+ /- : Adjust the volume.
CH

/ : Scan through channels.

REC.LIST: Record List.
REC: Press to start recording inDTV mode.
NICAM/A2: TV Nicam/A2 select.
DISPLAY: Press to display the current mode’s

information.
EPG: Call up the Electronic Program Guide. Available

only in DTV mode and when not viewing the Menu.

CURSOR KEYS (

, , , , OK): Allows you to

navigate the on-screen menus and adjust the system

settings to your preference.

CH.LIST: Display the channel list.
MENU: System setup menu.
EXIT: Exit the OSD menu.
COLOUR KEYS: Press to select the on screen function

associated with the respective colour.

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1

23

456

7 89

0

DISPLAY

EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER

INPUT: Press to display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode.
SOUND: Select the sound mode.

SLEEP: Standby timer.
ASPECT：Change the screen display mode.

NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you

are watching TV.

Return to the previous channel viewed.

FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press

VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels.

VOL+ /- : Adjust the volume.

REC.LIST: Record List.

REC : Press to start recording inDTV mode.

NICAM/A2: TV Nicam/A2 select.

DISPLAY: Press to display the current mode’s information.
EPG: To show the Electronic Program Guide during no-menu

state only in DTV mode.

CURSOR KEYS OK
Allows you to navigate the on-screen menus and adjust the

system settings to your preference.

MENU: System setup menu.
EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode.

D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

Remote Control

7

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

POWER

INPUT

PICTURE ASPECT

MUTE

SOUND SLEEP

SUBTITLE

CH.LIST

REC.LIST

1

23

456

7 89

0

DISPLAY

EPG

TV/RADIO

FAV

VOL CH

MENU

TV/TXT

CANCEL REVEAL

NICAM/A2

INDEX

HOLD SIZE SUBPAGE

EXIT

REC

D.SET D.MENU D.LAND.SUB

POWER

INPUT: Press to display the input source menu.

: Turn the TV on/standby.

PICTURE: Select the picture mode.

SOUND: Select the sound mode.

SLEEP: Standby timer.
ASPECT：Change the screen display mode.

NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you

are watching TV.

Return to the previous channel viewed.

FAV: Display the favorite program list.

MUTE: Press to mute the sound, press again or press

VOL+ to unmute.

SUBTITLE: Turn on/off the subtitle display in DTV mode

CH / : Scan through channels.

VOL+ /- : Adjust the volume.

REC.LIST: Record List.

REC : Press to start recording inDTV mode.

NICAM/A2: TV Nicam/A2 select.

DISPLAY: Press to display the current mode’s information.
EPG: To show the Electronic Program Guide during no-menu

state only in DTV mode.

CURSOR KEYS OK
Allows you to navigate the on-screen menus and adjust the

system settings to your preference.

MENU: System setup menu.
EXIT: Exit the OSD menu.

CH.LIST: Display the channel list.

D.SET: DVD system setup.

D.SUB: Turn on/off the subtitle display in DVD mode.

D.LAN: Select DVD disc language.

D.MENU: DVD play list/Disc menu.

When using DVD:

D.SET: DVD system setup.
D.MENU: DVD play list/Disc menu.
D.SUB: Turn on/off the subtitle display in DVD mode.
D.LAN: Select DVD disc language.

: Load/eject DVD disc.

: Play/Pause program.
: Previous chapter.
: Next chapter.

: Stop program.

: Fast reverse.
: Fast forward.

TV/TXT: Turn off/on the Teletext display.
TV/RADIO: To switch to TV or Radio state in DTV

mode.

CANCEL: Cancel the Teletext display.
REVEAL: Reveal any hidden text.
INDEX: Go to Teletext index.
HOLD: Hold or carry on the current Teletext subpage.
SIZE: Press to toggle the Teletext page views between

top half, bottom half and normal view.
SUBPAGE: Press to enter Teletext subpages, press
again to cancel.

NOTE

Teletext service may not be available in

all areas.

8

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Basic Operation

Power on/off

1. Connect to the power supply with the power adaptor.

2. To turn on the TV on or off press POWER on the remote control or on TV side
control bar.

Initial Start-up and Tuning Channels

When the TV is powered on for the rst time the Auto Installation menu will appear on
screen. Press OK (4 times) to accept the following;

Country: New Zealand
Language: English
Auto Power Off: OFF
Auto Search: DTV.

The TV then searches and stores local digital terrestrial channels. (DVB-T transmissions
Within coverage area). Depending on your location the process may take a few minutes.

NOTE

You will need to re-tune (search for) DTV channels again if the TV is

moved to a different geographic location. From Menu mode select;
Channels, Auto Search and then DTV.

Selecting an Input Source (TV, DVD etc)

Press INPUT on the remote control or on the TV sidebar
control to display the Input source menu.

Input Description

DTV Digital TV
ATV Analogue TV
AV Video (AV) Input

YPBPBR Component Video (YPbPr) Input

HDMI HDMI Input

PC PC (VGA) + PC Audio Input
Media USB Media Input

DVD DVD Mode

Press INPUT again or use

/ on the remote control or CH +/- on the TV sidebar

control to select the input source. The input source will change automatically after 3
seconds of inaction, or for immediate action, press OK on the remote control.

NOTE

Before you select the input source, make sure the connections are
prepared.

Basic Operation

9

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Viewing Channels

NOTE

To watch Digital TV channels make sure INPUT setting is DTV.

There are several methods to change the channel;

1. Use the Channel keys or enter the channel number on the remote control to change
channels.

2. Press OK to call up the Channel List. Then use the

/ keys to select the desired

channel. Press OK to select and change the channel.

3. Press FAV on the remote control to call up the Favourite lists (see Menu Settings/
Channel/Favourite Management on page 15. Then use the / keys to select the

desired channel. And then press OK to select and change the channel.

4. Select a channel from the Electronic Programme Guide.

The Channel Display Plate

Information about the channel and the current TV programme appears at the bottom of
the screen whenever a channel is changed or when called up by pressing DISPLAY.

Press ► to view the next programme’s information (Next) and then press ◄ to go
back to the current programme’s information (Now). Press

/ to navigate across all

channels, and view their respective information; press ENTER to watch the selected

channel.

• The channel info automatically displays for a short period whenever a channel is
changed.

• You can also press DISPLAY to display the channel info.

• If the selected channel supports special features such as Teletext (TTX), Parental
Rating, High Denition (HD) or Subtitles, then this information will be displayed in
the channel display.

• While the channel display is showing, press DISPLAY to bring up a synopsis of the
programme.

Basic Operation

10

UNIDEN TL16-DV, TL19-DV and TL22-DV LED TV/DVD Combo

Freeview EPG: Electronic Programme Guide

Press EPG on the remote control to call up the 8-day Progamme Guide.

NOTE

The EPG may take a several seconds to load before displaying on
screen.

You can navigate (▲, ▼, ◄ and ►) throughout the EPG.

Yellow Key: Back 24 hours.
Blue Key: Forward 24 hours.

Press DISPLAY to view the selected programme’s synopsis.
Press EPG to toggle between Now/Next and 8-day program guide views.
Press OK to change the channel to the currently displayed view.
Press EXIT to close and exit EPG.