Uniden GnVr 85XX series Owner's Manual

GNVR 85XX Series

Security System

OWNER’S MANUAL

For more exciting new products please visit our website:

Australia: www.uniden.com.au

WARNING

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.

In addition to the careful attention devoted to quality standards in the
manufacturing process of your product, safety is a major factor in the design of
every instrument. However, safety is your responsibility too. This section lists
important information that will help to ensure your enjoyment and proper use
of the product and accessory equipment. Please read them carefully before
operating and using your product.

IMPORTANT SAFEGUARDS

GENERAL PRECAUTIONS

1. All warnings and instructions in this manual should be followed.

2. Remove the plug from the outlet before cleaning. Do not use liquid
aerosol detergents. Use a water-dampened cloth for cleaning.

3. Do not use this product in humid or wet places.

4. Keep enough space around the product for ventilation. Slots and
openings in the storage cabinet should not be blocked.

5. It is highly recommended to connect the product to a surge protector to
protect from damage caused by electrical surges. It is also recommended
to connect the product to an uninterruptible power supply (UPS), which
has an internal battery that will keep the product running in the event of a
power outage.

1. Read and Follow Instructions - All the safety and operating instructions
should be read before the product is set up and used. Follow all operating
instructions.

2. Retain Instructions - These safety and operating instructions should be
retained for future reference.

3. Heed Warnings - Comply with all warnings on the product and in the
operating instructions.

4. Power Sources - This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the
type of power supplied to your location, consult your video dealer or local
power company. For products intended to operate from battery power or
other sources, refer to the operating instructions.

5. Overloading - Do not overload wall outlets or extension cords as this
can result in the risk of fire or electric shock. Overloaded AC outlets,
extension cords, frayed power cords, damaged or cracked wire insulation,
and broken plugs are dangerous. They may result in a shock or fire
hazard. Periodically examine the cord, and if its appearance indicates
damage or deteriorated insulation, have it replaced by your service
technician.

6. Power-Cord Protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.

7. Surge Protectors - It is highly recommended that the product be
connected to a surge protector. Doing so will protect the product from
damage caused by power surges.

8. Uninterruptible Power Supplies (UPS) - As this product is designed
for continuous, 24/7 operation, it is recommended that you connect the
product to an uninterruptible power supply. An uninterruptible power
supply has an internal battery that will keep the product running in the
event of a power outage.

9. Ventilation - Slots and openings in the case are provided for ventilation
to ensure reliable operation of the product and to protect it from
overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near
or over a radiator or heat register. This product should not be placed in a

INSTRUCTIONS

built-in installation such as a bookcase or rack unless proper ventilation is
provided and the product manufacturer’s instructions have been followed.

10. Water and Moisture - Do not use this product near water - for example,
near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement, near a swimming pool, etc.

11. Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.

12. Accessories - Do not place this product on an unstable cart, stand,
tripod, or table. The product may fall, causing serious damage to the
product. Use this product only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer’s instructions and
use a mounting accessory recommended by the manufacturer.

13. Camera Extension Cables - Check the rating of your extension
cable(s) to verify compliance with your local authority regulations prior to
installation.

14. Mounting - The cameras provided with this system should be mounted
only as instructed in this guide or the instructions that came with your
cameras, using the provided mounting brackets.

15. Camera Installation - Cameras are not intended for submersion in
water. Not all cameras can be installed outdoors. Check your camera
environmental rating to confirm if they can be installed outdoors. When
installing cameras outdoors, installation in a sheltered area is required.

SERVICE

1. Servicing - Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.

2. Conditions Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product has been dropped or the cabinet has been

damaged.

6

• If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the product to its nor mal operation.

• When the product exhibits a distinct change in performance. This
indicates a need for service.

3. Replacement Parts - When replacement parts are required, have the
service technician verify that the replacements used have the same
safety characteristics as the original parts. Use of replacements specified
by the product manufacturer can prevent fire, electric shock, or other
hazards.

4. Safety Check - Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks recommended by the
manufacturer to determine that the product is in safe operating condition.

USE

1. Cleaning - Unplug the product from the wall outlet before cleaning.
Do not use liq uid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.

2. Product and Cart Combination - When product is installed on a cart,
product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.

3. Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points
or “short-out” parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.

4. Lightning - For added protection of this product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power line surges.

7

INTRODUCTION ...................................................................................9

What’s in the Box? .............................................................................. 10

Getting to know your GNVR ................................................................ 11

Getting to know your Cameras ............................................................12

Hardware Connections ........................................................................13

Installing the Cameras ........................................................................ 14

Adjusting the Camera View Angle .......................................................15

Mouse Operation .................................................................................15

BASIC OPERATION ............................................................................17

Start up the GNVR system .............................................................. 17

On-screen display ........................................................................... 18

Main Menu ...................................................................................... 18

ADVANCED OPERATION ...................................................................24

Log into the System ........................................................................ 24

ADVANCED SETTINGS IN MAIN MENU ........................................... 25

Playback ..........................................................................................26

Backup ............................................................................................ 27

PTZ ..................................................................................................28

Capture ........................................................................................... 29

Alarm .............................................................................................. 30

File Manager ................................................................................... 30

Setting ............................................................................................. 31

Account ........................................................................................... 48

Record ............................................................................................ 52

Display Setting .................................................................................... 53

Image Setting ...................................................................................... 55

IP Channel Setting .............................................................................. 56

OTHER MAIN MENU OPTIONS .........................................................58

Quick Setup .....................................................................................58

CONTENTS

8

Power Off ........................................................................................ 59

Reboot .............................................................................................59

Logout ............................................................................................. 59

Device Time .................................................................................... 59

Volume ............................................................................................ 60

USING THE APP .................................................................................61

WARRANTY ........................................................................................66

9

OVERVIEW

The GNVR Receiver provides a high-performace security network using
a standard H.264 video compressed format. The GNVR can be used as a
stand alone device or online as a part of a video surveillance network. With its
professional network video surveillance software, the GNVR supports:

• Highdenition1080precording.

• Real-time recording at 25fps per channel.

• 24/7 security-grade hard drive.

• Continuous, scheduled, and motion recording.

• H.264 video compression.

• HDMI cable included for simple connection to HD TVs.

• PTZ cameras supported, remotely controlled through a mobile App.

• Accurate time stamps with NTP & daylight savings time.

• Digital zoom in live view and playback.

• 2 video outputs (HDMI & VGA) to connect multiple monitor types.

• Instant USB backup of live video from selected camera.

• Upgradeablermware.

• 3-Step remote view.

• Free Uniden GuardianLive iOS and Android compatible apps with live

viewing, playback, video recording, and snapshot capability.

• Instant email alerts with attached snapshots.

INTRODUCTION

10

What’s in the Box

Model 8-Ch NVR Outdoor Camera

GNVR 8540 1 4

GNVR 8580 1 8

Each NVR comes with:

Each Camera comes with:

5. 30m Cat5E Cable

6. Mounting Hardware
(not shown here)

1

2

3

4

5

1. Power Cable

2. HDMI Cable

3. Mouse

4. Ethernet Cable

11

Getting to Know Your GNVR

Front

Power
LED

HDD
LED

USB
Port

ALARM IN/OUT

VIDEO IN

HDMI

USB
Port

RJ45

DC IN

VGA

NET
LED

Alarm
LED

(cam eras)

(power cable)

(mouse/
external HD)

(ethernet
cable)

1 Network connected

2 Power connected

3 Hard Disk Drive indicator

4 Alarm indicator

5 USB port

1 RS485 and Alarm In/Out Connections: Connect external alarm

devices.

2 VGA: Connect a VGA monitor (not included) to view the system

interface, and live or recorded playback.

3 HDMI: Connect the included HDMI cable from this port to an HDMI

monitor or TV (not included) to view the system interface, and live
or recorded playback.

4 WAN: Connect the included CAT5E Ethernet cable to your existing

router or network for local and remote connectivity.

Back

12

5 USB port: Connect the included USB mouse.

6 Camera Input: Connect the Uniden 1080P Wired HD cameras.

7 DC IN: Connect the included AC power adapter.

GETTING TO KNOW YOUR CAMERAS

Ideally, outdoor cameras should be easily visible whereas making it a
deterrent for intruders.

Light Sensor

Camera Lens

Infra-red LEDs

INSTALLING THE GNVR

Before installing the GNVR, take into consideration the following points.

• Ideally, choose a location that is central and has easy access to the mains

power.

• To get the most out of the ‘remote viewing’ feature, please ensure that the

GNVR is located near the modem/router or Ethernet network point.

• Choose a secure location to avoid tampering, however, avoid enclosed

areas as that might lead to overheating of the unit.

• Be careful and ensure that the ventilation holes on the side of the GNVR is

not blocked.

13

1. Connect the camera to the 30m Ethernet cable and plug the cable into the
VIDEO IN port on the GNVR.

2. Connect the HDMI cable (supplied) to the HDMI port on the GNVR and to
the external display device (TV/PC) or the VGA cable (not supplied) to the
VGA port.

3. Connect the Mouse to one of the USB ports on the GNVR.

4. Connect the Ethernet cable to the RJ45 port on the GNVR and to your
modem/router (remote viewing).

5. Plug the GNVR’s Power Cable jack into the DC IN port and the other end to
a power outlet.

HARDWARE CONNECTIONS

Follow the steps below to connect the GNVR and the camera(s).

Camera

30m Ethernet Cable

Power Cable
(To Power Outlet)

External
Hard Disk

Ethernet Cable

Modem/Router

HDMI Cable

External Display

NVR

Mouse

(To the USB
port in front)

14

INSTALLING THE CAMERAS

• Test the cameras before permanent installation. Make a plan for camera
wire routing and for camera angle.

• Mount the camera so the lens is away from direct and intense sunlight.

• Plan to route the wiring so it does not interfere with power lines or telephone

lines.

• Ensure that the camera wiring is not exposed or easily cut.

• Mount the camera in an area that is visible, but out of reach.

• Avoid pointing the camera at a glass window to see outside. This may result

in a bright white ring in the night vision image, as the light from the night

visionLEDsmayreflectofftheglass.

• Adjustthecameraanglesothatitcoversanareawithhightrafc.

• In “high-risk” locations, have multiple cameras point in the same area. This

provides camera redundancy if a vandal attempts to damage the camera.

The following installation instructions refer to the cameras included with
the GNVR package. If installing another manufacturer’s camera, refer to
installation instructions included with that camera.

1. Mount the camera(s) to the desired surface using the parts in the
supplied mounting kit. Choose a firm mounting surface. If mounting in
drywall, use the drywall anchors supplied in the kit.

2. Adjust the camera stand to ensure that the camera has a satisfactory
view of the area you would like to monitor. Stand configuration depends
on the mounting surface you have chosen (see below for suggested
stand configurations).

Table Mount Wall Mount Ceiling Mount

Camera Mounting Options

Installing the Cameras

Installation Tips

15

Adjusting the Camera View Angle

The camera has several adjustment points to provide maximum flexibility
when setting the view angle. To make the adjustments, use the hex key
included with the Camera Mounting Kit.

Camera View Angle Adjustments

Mouse Features

Left Button

Right Button

Scroll Wheel

16

LEFT BUTTON

• In live view, click to open the Navigation Bar. Right-click to close it.

• In live view while in a split-screen display mode, double-click an individual

channel to view it in full-screen. Double-click again to return to the split­screen display mode.

• While navigating menus, click to open a menu option.

RIGHT BUTTON

• In live view, right-click anywhere on the screen to open the Main Menu.

• Within system menus, right-click to exit menus.

SCROLL WHEEL

• When viewing an image in live view, use the scroll wheel to zoom in or out.

17

BASIC OPERATION

START UP THE GNVR SYSTEM

1. Plug in the power supply. The power indicator lights up, the system emits
a single beep, and the preview screen displays.

2. The GNVR’s normal start-up mode is multi-screen.

• The GNVR system displays live views of any cameras connected.

• The main camera is highlighted. Click on another screen to set it as the

main camera.

• Local time and date are set automatically through the network connection.

GNVR Multi-Screen

18

Channel No.

Date/Time

Instantly record video

Zoom

Take a snapshot

Click to . . .

On-Screen Display

The GNVR system shows the following for all live views.

Main Menu

The Main Menu allows access to the GNVR’s key functions. Using the mouse,
right click the screen during a live view to display the Main Menu.

19

The following features are available without having to log in.

• 4:3 - Changes the live view screen aspect ratio from 16 X 9 to 4 X 3.

• The 4 Screen, 6 Screen, 8 Screen and 9 Screen menu items allow for
displaying 4, 6, 8, or 9 live view screens at the same time. Click the desired

screenconguration.

• When in Quad view (4 screen), Series 1 and 2 change from viewing

Cameras 1 - 4 to viewing Cameras 5 - 8.

Working With Multiple Live View Screens

This is a typical view of the 8 Screen format.

8-Screen Format

To display a channel view in the larger screen, drag and drop any channel live
view into the larger screen.

20

During a live view with multiple screens displayed, double click any channel to
view it in full screen.

Log into the System

You must log into the system to access all features of the GNVR.

1. Hover the cursor over Start.
A sub menu displays:

2. Click Login.
The Login screen displays:

Login Screen

Full Screen

Access Login Screen

21

3. Enter the default user name (admin), leave the password field blank, and
click Login.

Change Password

Note: It is strongly recommended that you add a password to your
system.

1. Right click the screen to display the Main Menu, then left click Setting.

2. Click Account.

3. Click the admin field.

4. Click Modify User in the lower right corner. Use the on-screen keypad to
enter and confirm a password. Click OK.

SET THE DEVICE TIME

After logging in, access the Settings menu to set the GNVR system date and
time.

1. Use the mouse and right-click anywhere on the screen. The Main Menu
screen displays.

Main Menu Screen