Uniden DECT 1802, Dect 1806, Dect 1807 Quick Start Manual

Quick Start Guide

DECT

1802

Quick Start Guide

Here!

Quick Reference Guide

Start

Start

Here!

Quick Start Guide - next page...

Optional
Handset and
Charge Base

Suits
Models­Dect 1805
Dect 1806
Dect 1807

Dect 1802 Qk 7/19/02 3:44 PM Page 1

i

PRECAUTIONS

AVOID ­Television sets and
other electronic
appliances

CHARGE ­the new phone
for 15 - 20 hrs.

DON’T ­overload the
power outlet.

AVOID ­multi power
boards

AVOID -

connecting

more than

3

phones as ringing

may be impaired

AVOID -

Microwave

ovens

AVOID -

Moisture

AVOID -

Computers

CHOOSE ­a central location

AVOID ­Moisture

INSTALLATION & SAFETY

Choosing the best location for your phone

When choosing a location for your phone there are a number of appliances the phone
should not be near, and areas you should avoid.

This symbol
indicates
important
operating
and servicing
instructions.

NOTE: ringing will not be impaired by extra cordless handsets

The earcap of this
telephone may
attract and retain
small metallic
objects

Dect 1802 Qk 7/19/02 3:44 PM Page 2

ii

This page is a very condensed version of your owners manual. It is designed to allow you to get your
phone installed and operating as quickly as possible - however it does not attempt to explain any of the
advanced features of your phone.

Here!

Installation

TEL PWR

Charge Base

AC Adaptor

Power point

Quick Reference Guide

Start

Start

Here!

Installing the Handset Batteries

Press battery cover to release.
Slide cover off.

Install the 2 rechargeable
batteries in each handset.

Slide the battery covers back
until they snap into place.

Place the handset on the charge base
and charge uninterrupted for 15 hours.

++

--

+

-

Plug the telephone cord into the main base unit,
then into the telephone socket on the wall.

Plug the AC Adaptor cord into the charge base unit,
then into the power point.

Make sure the AC

Adaptor remains

plugged in and

switched on at all

times. Use only

the Uniden AC

Adaptor supplied

with this unit.

Use only the battery

pack supplied or

rechargable AA

Ni-Cad Batterys.

DO NOT USE

STANDARD

BATTERYS

AC Adaptor

Additional Charger

PWR

Plug the AC Adaptor cord into the charge base unit,
then into the power point.

Use only the

Uniden AC

adaptors supplied

with this unit

Use only the battery

pack suppllied or

rechargable AA NiCad

Batteries.

DO NOT USE

STANDARD
BATTERIES

Dect 1802 Qk 7/19/02 3:44 PM Page 3

The Handset will display the Base Station RFPI. (The
RFPI is a unique 10 digit number to each Base Station
and serves to indicate that a Base Station has been
located.)

Press to accept the RFPI.

Finally a Handset number must be selected. Each Base
Station can support up to six Handsets. The available
Handset numbers are displayed:

Select the first available Handset number.
eg. Press .

Note: the display shows the Base Station (left) and
Handset (right) numbers:

To make a call

1. Press and listen for the dial tone.

2. Dial phone number.
OR

1. Dial phone number

2. Press .

To hang up

Press or place the handset back on the
base unit.

To answer a call

When handset is on the base unit: Remove handset
from the base and speak.

If handset is off the base unit: Pick up handset, press

and speak.

iii

Registering a handset to a base unit

Press and hold on the Main Base 5 seconds.
The Talk LED on the main Base will flash.

Press then on the handset.

The available main Base numbers (1 to 4) are displayed.

Select the first available Base Station number.
As confirmation, the user is prompted for the System PIN
number.

The default System PIN (the PIN that the unit
arrives with) is 1111 (see page 9) .

Press the 4 Digit Pin number
(default )

If this is entered correctly, the Handset will start to search
for the Base Station.

If the PIN is incorrect, a single low tone will be
heard and another opportunity to enter the PIN is
offered.

11 22 33 44

-- 11 -- 11

00 00 22 22 11 11 33 AA 99 88

22 33 44 55 66

Dect 1802 Qk 7/19/02 3:44 PM Page 4

1

CONTENTS

Installation & Safety ..............................................................................................................................................i

Quick Start Guide:

Step 1 - Installation .............................................................................................................................................ii

Step 2 - Installing the Handset Batteries ....................................................................................................ii

Step 3 - Registering a handset to a base unit ..........................................................................................iii

Contents ..................................................................................................................................................................1

Included in your Package ..................................................................................................................................2

Handset Display .....................................................................................................................................................2

Handset ..................................................................................................................................................................2

Charging the Handset Batteries .......................................................................................................................3

Description of Handset Keys ............................................................................................................................3

Description of Displayed Symbols ................................................................................................................4

Advanced Functions ..............................................................................................................................................5

Handset Registration .......................................................................................................................................5

GAP Registration .............................................................................................................................................5

Base Station Registration Key .........................................................................................................................6

Handset De-Registration .................................................................................................................................7

PIN Code Changes ..........................................................................................................................................8

Using Your phone

Switching the Handset on and off ..................................................................................................................9

Locking and Unlocking the Keypad ...............................................................................................................9

Call Timer.........................................................................................................................................................9

Making an External Call ..............................................................................................................................10

Caller ID .........................................................................................................................................................12

Making an Internal Call ...............................................................................................................................12

Receiving a Call ............................................................................................................................................13

Call Transfer ..................................................................................................................................................13

Call Transfer through a PABX .......................................................................................................................13

Call Waiting/Flash ........................................................................................................................................13

Page Handsets from the Main Base ..............................................................................................................13

Personalising Your Phone

Storing Dial Memories...................................................................................................................................14

Received Speech Volume................................................................................................................................15

Microphone Mute...........................................................................................................................................15

Handset Ring Volume ...................................................................................................................................16

Handset Ring Tone ........................................................................................................................................16

Trouble Shooting .................................................................................................................................................17

Warranty ...............................................................................................................................................................18

Dect 1802 Qk 7/19/02 3:44 PM Page 5

SETTING UP

2

digital

store

menu

clear

rdl•

pause

flash

ghi

pqrs

tuv

wxyz

jkl

mno

def

abc

up •down

int

HANDSET DISPLAY

- All icons displayed -

1) Battery icon 2) Menu icon

3) External Call icon 4) Internal Call icon

5) Microphone mute icon 6) Ringer Off icon

7) Range icon 8) Alphanumeric indicator

Handset

2 x Batteries

AC Adapter

Additional
Charger

If anything is
missing, please
contact your
dealer
immediately.

Quick Start Guide

DECT

1802

Quick Start Guide

Here!

Quick Reference Guide

Start

Start

Here!

Quick Start Guide - next page...

Optional
Handset and
Charge Base

Suits
Models­Dect 1805
Dect 1806
Dect 1807

Printed Materials

Use only 1.2 volt
Ni Cad
Rechargeable
Batteries

INCLUDED IN YOUR PACKAGE

Introduction

Please read this Guide before use and then save it in a convenient place
for future reference.

Whats in the Box?

Check these items have been included in the box.

HANDSET

1) Handset earpiece

2) LCD display

3) Store key

4) Talk key

5) Numeric keypad

6) key

7) Menu key

8) Power/Delete key

9) Up/Down key (Cycle)

10) Redial/Pause key

11) Flash key / Call Waiting

12) Internal Call key

13) # key

14) Handset microphone

15) Charging contacts

Dect 1802 Qk 7/19/02 3:45 PM Page 6

CHARGING THE HANDSET BATTERIES

Charging of the Handset batteries takes place automatically when the Handset is placed on
the Main Base or Additional Charger.
An LED on the side of the Base Station indicates that the Handset is charging.
When first setting up, the batteries should be charged uninterrupted for 15-20 hours; this
will ensure that they are fully charged.
In use, it is advisable to return the Handset to the Charge Base to be charged at regular
intervals. After fully charging the Handset during setting up, the Handset should never
require longer than about six hours to return to its fully charged condition, e.g. overnight.
When the battery is fully charged:

• 6 Hours talk time

• 120 Hours Standby time

DESCRIPTION OF HANDSET KEYS

3

SETTING UP

Talk Key: Pressing is equivalent to picking up a conventional
telephone.

Memory Key: Used to access Dialling Memories.

Up/Down (Cycle) Key: Some settings offer a series of options,

e.g. Five ring styles are offered. These options can be selected either by
pressing the appropriate number key or by cycling through the options using
the key.

Redial / Pause Key: Recalls and displays the last four telephone numbers
called.

Flash / Call Waiting: Used to access call waiting or to access some features
of a business PABX

Internal Call Key: If you have more than one handset registered on the
Main Base, then internal calls may be made between these handsets.

Program Mode: Used to programme speed dial numbers and
telephone settings.

Power / Delete Key: The Power / Delete Key serves three functions on
the Handset:

Power On/Off
Last Digit Delete
Program Abort

int

Only use the
batteries supplied or
rechargable AA Ni
Cad batteries. DO
NOT USE
STANDARD
BATTERIES.

Dect 1802 Qk 7/19/02 3:45 PM Page 7

4

SETTING UP

DESCRIPTION OF DISPLAYED SYMBOLS

EXTERNAL CALL The External Call icon is visible when is pressed.

The icon flashes when:
there is an incoming call,
a call has been dropped,
another Handset is using the external line

INTERNAL CALL If you have more than one handset registered to the Main Base,

then internal calls may be made between these handsets.

BATTERY LEVEL Indicates the current battery status. When the battery is empty the

Low Battery Warning Tone will sound if it is set. Thirty seconds later
the Handset will 'close down'.

MICROPHONE The Handset microphone has been muted during a call.

MUTE

RINGER OFF The Handset ringer has been turned off.

SIGNAL RANGE Indicates signal strength to handset. All segments are flashed when

the handset is searching for a Main Base.

INT

Dect 1802 Qk 7/19/02 3:45 PM Page 8

ADVANCED FUNCTIONS

Handset Registration

Handsets need to be registered with Base stations. Each Handset can be registered with up to
four Base stations. Up to six Handsets can be registered to each Base station.

GAP Registration

This Telephone conforms to the GAP (Generic Access Profile) standard. This means that the
Handset can be registered with base stations made by other manufacturers, provided that
they also comply with the GAP requirements. Similarly other manufacturer's handsets can
be registered with the Base station.
For the registration procedure associated with non-Uniden equipment, the relevant user
documentation should be consulted.
It should be noted that other brand equipment might not provide the comprehensive
features available with this telephone.

Since registration of a Handset must be completed within 90 seconds, it may be
advisable to review these instructions before starting.

ADVANCED FUNCTIONS

5

Dect 1802 Qk 7/19/02 3:45 PM Page 9

BASE STATION REGISTRATION KEY

Press and hold the Base Station key for five seconds. The Talk LED on the
Base Station will flash to indicate that it is in registration mode. The user then has 90
seconds to complete the handset registration procedure.

An unregistered Handset shows the display shown below:

Press then .

The available Base Station numbers (1 to 4) are displayed.

If the handset is already registered onto a Base Station, then the number of the
Base Station will flash. If you have more than one Base Station and are registering
the handset onto a second Base Station, then you should select the first number
that is not flashing.

Select the first available Base Station number.
As confirmation, the user is prompted for the System PIN number.

The default System PIN (the PIN that the unit arrives with) is 1111 (see page 8 )

Press the 4 Digit Pin number (default )

_ _ _

ADVANCED FUNCTIONS

- - - -

11 22 33 44

6

Dect 1802 Qk 7/19/02 3:45 PM Page 10

If this is entered correctly, the Handset will start to search for the Base Station.

If the PIN is incorrect, a single low tone will be heard and another opportunity to
enter the PIN offered.

The Handset will display the Base Station RFPI. (The RFPI is a unique 10 digit number to
each Base Station and serves to indicate that a Base Station has been located.)

Press to accept the RFPI.

Finally a Handset number must be selected. Each Base Station can support up to six
Handsets. The display shows the available handset numbers:

Select the first available Handset number.
eg Press .

Note that the display shows the Base Station (left) and Handset (right) numbers:

HANDSET DE-REGISTRATION

Handsets can be de-registered from Base Stations as required.
Press .
The user is prompted for the System PIN.

The default System PIN is (see page 8)

Press the 4 digit PIN.

ADVANCED FUNCTIONS

int

INT

7

00 00 22 22 11 11 33 AA 99 88

22 33 44 55 66

-- 11 -- 11

- - - -

Dect 1802 Qk 7/19/02 3:45 PM Page 11

The handset numbers already registered are displayed. In the example shown, handsets
1,2 and 6 are registered.

Press the handset number to be de-registered. eg
Press

The selected Handset is now de-registered.

PIN CODE CHANGES

The default System PIN (the PIN that the unit arrives with) is 1111.

The System PIN can be changed from any Handset registered to a Main Base.
Press .

The user is prompted for the current System PIN.

Press the 4 digit PIN.

Press the new 4 digit PIN.

Confirm the new PIN digit keys by entering the number again.

Confirm the setting and ensure that you make a note of the new PIN number in a
convenient location. Press to store and exit.

IMPORTANT NOTE The PIN number is required to program many of the
features of this product. If the PIN is changed from its factory default, and the new

number is lost, then it will not be possible to program the features that require its use.

ADVANCED FUNCTIONS

int

99 -- 11 22 66

INT

INT

INT

INT

8

- - - -

- - - -

- - - -

Dect 1802 Qk 7/19/02 3:45 PM Page 12

SWITCHING THE HANDSET ON AND OFF

To turn the handset on:
Press until the display is visible.
The Main Base number is shown on the left and the handset number shown on the right.
(These numbers may differ from those shown below.)

To turn the handset off:
Press and hold until the display goes blank.

(If the handset is off when it is returned to the Base Station cradle, it will automatically
switch back on).

LOCKING AND UNLOCKING THE KEYPAD

Locking the Handset keypad prevents accidental key presses causing dialling or
programming. The only activities that can be performed whilst the keypad is locked are
receipt of an incoming call and unlocking the keypad.
Press followed by to lock the keypad.

The display will appear as below.

Repeat to unlock the keypad.

CALL TIMER

The call duration will be displayed, 10 seconds after the call has started.

BASIC ACTIVITIES

9

LOC

--11--

11

Dect 1802 Qk 7/19/02 3:45 PM Page 13

MAKING AN EXTERNAL CALL

Making an external call is very easy -there are several styles of call:

• On-Line Dialled Calls

• Pre-Dial Calls

• Memorised Number Call

• Last Number Redial

• Caller ID Dial

On-Line Calls

Press
When the dial tone is heard, key in the number. As the number is entered it is displayed
and dialled.
Press

Press to finish the call.

Pre-dial Calls

Pre-dialling allows you to enter the telephone number before you take the outside line.
You may then check that the number is correct before dialling.
Key in the number. As the number is entered it is displayed.
Press

If a digit is entered incorrectly, use a short press of to delete it.

Press to dial the displayed number.

Press to finish the call.

Dialling a number stored in memory

Frequently dialled numbers may be stored in memory and easily dialled.
(To store numbers in the Dial Memories, see page 14.)
You may select a number to be dialled from those you have previously stored, either by
using the 2 digit directory location number or by scrolling through the memories.

BASIC ACTIVITIES

10

11 22 33

11 22 33

Dect 1802 Qk 7/19/02 3:45 PM Page 14

Dialling from memory using the 2 digit directory location

Press the and enter the 2 digit directory number

01-20

that refers to the number

you wish to dial.

If the number is correct, press to dial the displayed number.

If the number you selected is the wrong memory location, you may use
to scroll through the memory locations, or press to exit.

Dialling from memory by scrolling stored numbers

Press

Press (Cycle) to step through the numbers you previously stored, until the number
you wish to dial is displayed.

Press and the number will be dialled.

When scrolling through the memories, if the stored number is too long to be
displayed, long key presses of and keys will reveal the digits of the
number that are not displayed.

00 11 00 99 2277 33 8833 88 33

11

BASIC ACTIVITIES

00 11 00 11 2222 3355 55 558877 66

Dect 1802 Qk 7/19/02 3:45 PM Page 15

BASIC ACTIVITIES

12

int

INT

00 11 00 11 77 66 33 5555 55 77 66 55

11

int

Caller ID features
are not available
in New Zealand

Last Number Redial Calls

The handset stores the last four numbers called.
Press to display the last number called. Press again to display the
next number.

Press to dial the displayed number.

CALLER ID

(Caller ID features not available in New Zealand)

The Caller ID Memory contains the telephone numbers of the last 25 calls made to the
Base Station. When a Caller ID telephone number is displayed, it can be dialled directly.

To Display Caller ID Numbers

To cycle through the 25 locations, press .
Press (long press - greater than 2 seconds)
Press to call the number directly.
The Caller ID Store location is numbered from

01-25.

The telephone number of the most

recent caller

(01)

will be displayed first.

MAKING AN INTERNAL CALL

If you have more than one handset registered on your Main Base, then internal calls can be
made between the handsets.

Press key.

Key in the number of the Handset to be called 1 to 6.

If the called Handset accepts the call, the dialled Handset number stops flashing
and the connection will be made.

All Handsets

All Handsets currently registered with the Main Base can be called simultaneously although
only one may answer.
Press .

Press to call all Handsets.
When a Handset accepts the call, the symbol will be replaced with the Handset identity.

Dect 1802 Qk 7/19/02 3:45 PM Page 16

RECEIVING A CALL

When a Handset receives an incoming call press .

The appropriate icon will be displayed for the duration of the call.

If the Handset is resting in the Charge Base and the AutoTalk feature is enabled, simply
lifting the handset will connect the call.

CALL TRANSFER

If you have more than one handset registered on your Main Base, incoming external calls
can be transferred to another Handset.
After pressing to accept the call - inform the caller that you are about to transfer
the call:
Press then the number of the Handset to receive the call.
When the other handset is answered you may speak to them first and then transfer the call
by pressing .

If the other handset does not answer, Press to return to the original caller.

An optional Dect handset is required for this feature.

CALL TRANSFER THROUGH A PABX

This telephone may not be compatible with all Business Telephone Systems. Please contact
your PABX provider for information on transferring calls. However a common method of
transferring through a PABX is to press then the extension number you require
followed by .

CALL WAITING / FLASH

If the call waiting tone sounds during a call:

Australia: Press then to switch between callers.
New Zealand: Press to switch between callers.

PAGE HANDSETS FROM THE MAIN BASE

Pressing the Page key on the Main Base will cause all handsets to ring for 30 seconds.
This may be useful if you wish to locate a missing handset.
Pressing the Page button again, or pressing on a handset, will stop the paging signal.

If the Main Base Page key is pressed for longer than 4 seconds, the
Main Base will enter the registration mode.

BASIC ACTIVITIES

13

int

int

Dect 1802 Qk 7/19/02 3:45 PM Page 17

STORING DIAL MEMORIES

Each Handset can store up to 20 telephone numbers in Dial Memories.
Each number can be up to 24 digits long.

Storing a number in memory

Press then .

Press until an empty location (location number followed by 3 bars), is reached.

Enter the telephone number to be stored.

Confirm and exit Dial Memory mode by pressing .

Whilst entering the telephone number, an incorrectly entered digit may be removed
by a short press of (less than 2 seconds).

Changing the Number

The number stored in a particular dial memory can be overwritten or changed simply by
following the procedure for storing numbers and entering the new number over the existing
number.

Displaying long numbers

If the stored number is too long to be displayed, long key presses of or
keys will move the displayed number left or right respectively.

USER PREFERENCES

14

00 11

00 11 00 99 2277 33 8833 88 33

Numbers stored
in one Handset
can not be
accessed from
other Handsets

Dect 1802 Qk 7/19/02 3:45 PM Page 18

Delete a Number from Memory

Numbers held in a Dial Memory locations can be deleted.
Press then

Press to step to the number to be deleted.

When the number to be deleted is displayed, short presses of the Power/Delete key will delete
the last digit of the number. When all digits have been deleted Press .

The number previously stored in the displayed location will be deleted.

RECEIVED SPEECH VOLUME

The volume of received speech heard in the earpiece, can be adjusted through five levels.
This must be done whilst a call is in progress.

The volume will increase for each press of .
Note that the volume will stay at the last setting after each call.

MICROPHONE MUTE

To allow the user to have a private conversation during an external call.

Press then to turn the Mic Mute on and off.

USER PREFERENCES

15

maximum

minimum

Dect 1802 Qk 7/19/02 3:45 PM Page 19

HANDSET RING VOLUME

The Handset Ring Volume can be adjusted through five levels (0 through 4).
Press then .

The display shows the current ring volume setting; the current setting is level 2
You may step through the available settings by pressing .

Confirm the setting by pressing

Disabling the ringer

The handset ringer may be switched off by following the procedure above and selecting the
‘Zero level’ setting.
With the ringer switched off, will be shown on the display. The phone symbol will
flash when an incoming call is detected.

HANDSET RING TONE

Five Handset ring tones are available, numbered from 1 to 5.
Press then .

The display shows and sounds the current ring Style setting.
Press

The Ring Style will change (1 through 5) for each press of .
Press to store and exit .

USER PREFERENCES

16

maximum (4)

(3)
(2)

minimum (1)

off (0)

Dect 1802 Qk 7/19/02 3:45 PM Page 20

SUGGESTION

• Make sure the AC adaptor is plugged into the base and
wall outlet and switched on.

• Make sure the handset is sitting correctly
in the base.

• Make sure the charging contacts on the handset and base
are clean.

• Move the handset and/or base to a different location away
from metal objects or appliances and try again.

• The handset rechargable battery may need to be
charged.

• You may be out of normal operating range. Move closer to
the base unit.

• Move the base unit so that it is centrally located in your
residence or office and not near appliances.

• Make sure handset is registered to a Main Base

• Make sure the AC adaptor is plugged into the base and
wall outlet.

• Disconnect the AC adaptor for a few minutes, then
reconnect it.

• Place the handset back on the base unit for a few seconds.

• The rechargable battery pack may be weak. Charge the
battery for 15-20 hours.

• The handset may be too far away from the base. Place the
base away from appliances or metal objects.

• Place the handset back on the base unit for a few seconds.

• You may have exceeded the Ringer Equivalence Number
(REN) limit of how many phones can be connected to the
same line. The REN total of all devices (printed on the
label on the bottom of each unit) should not exceed three (3).
Disconnect the appropriate units to lower the REN total.

• Check the rechargable battery connection inside the
battery compartment on the handset.

• The handset rechargeable battery pack may need
to be charged.

• Your handset is not registered to your base unit.

• Please refer to page 7 for re-registering instructions.

• The handset rechargeable battery pack may need to be charged.

PROBLEM

The charge light
won’t come on
when the handset
is placed on
the base.

The audio sounds
weak and/or
scratchy.

Can’t make or
receive calls.

The handset
doesn’t ring or
receive a page.

No power on
handset unit

Not sub

Handset is
beeping

TROUBLESHOOTING

TROUBLE SHOOTING

If your phones are not performing to your expectations, please try these simple steps
first before calling Uniden customer service.

YOUR NEW PHONE

17

Dect 1802 Qk 7/19/02 3:45 PM Page 21

WARRANTY

18

WARRANTY

One Year Limited Warranty

Important: Evidence of original purchase is required for warranty service.
Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498

Uniden New Zealand Limited
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration
of this warranty, its DECT1802 (herein after referred to as the Product), to be free from
defects in materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only, shall terminate
and be of no further effect 12 months after the date of original retail sale. This warranty will
be deemed invalid if the product is; (A) Damaged or not maintained as reasonable and
necessary, (B) Modified, altered or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) Improperly installed, (D) Repaired by someone other
than an authorised Uniden Repair Agent for a defect or malfunction covered by this
warranty, (E) Used in conjunction with any equipment or parts or as part of a system not
manufactured by Uniden, (F) Warranty is only valid in original country of purchase.
PARTS COVERED: This warranty covers for one (1) year, the Base Unit and Handset only.
All accessories (AC Adaptor etc)are covered for 90 days only.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, the warrantor at its discretion, will
repair the defect or replace the product and return it to you without charge for parts or
service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN
ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS UNDER THE
CONSUMER GUARANTEE ACT.
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In the event that
the product does not conform to this warranty, the Product should be shipped or delivered,
freight pre-paid, with evidence of original purchase (eg. a copy of the sales docket), to the
warrantor at:
UNIDEN AUSTRALIA PTY LIMITED UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION SERVICE DIVISION
345 Princes Highway, 150 Harris Road,
Rockdale NSW 2216 East Tamaki, Auckland
AUSTRALIA NEW ZEALAND
Ph [phone] Fx [phone] Ph (9) 273 8383 Fx (9) 274 4253
Toll Free 1300 366 895 Toll Free 0800 4 UNIDEN

4 864 336
www.uniden.com.au www.uniden.co.nz
Customers in other States should ship or deliver the Product freight pre-paid to their nearest
Uniden Authorised Repair Centre (Contact Uniden for the nearest Warranty Agent to you).

Dect 1802 Qk 7/19/02 3:45 PM Page 22

THANK YOU

FOR PURCHASING A UNIDEN PHONE!

© 2002 Uniden Australia Pty Limited

Uniden New Zealand Limited
Printed in China
UAZZ01589ZZ

Dect 1802 Qk 7/19/02 3:45 PM Page 23