Uniden DECT1363 series User Manual
Important Safety Instrucons
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
x This unit is NOT waterproof. DO NOT expose it to rain/moisture.
x Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near
a swimming pool.
x Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from
lightning.
x Do not use the telephone to report a gas leak in the vicinity of the leak.
x Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check
with local codes for possible special disposal instructions.
x Do not place the handset in any charging cradle without the battery installed and the battery cover securely in place.
SAVE THESE INSTRUCTIONS
CAUTION! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions. Do not open or mutilate the battery. Disconnect the battery before shipping this product.
© 2011 Uniden America Corp. Printed in Vietnam
Ft. Worth, Texas U01UN261ZAZ(0)
DECT1363 base with cordless
handset
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line*
817-858-2929 or
800-297-1023
need a part or an accessory Parts Department* 800-554-3988
need special assistance due to a
disability
Accessibility Help Line
800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time; see our website for detailed business hours.
DECT1363 Series User's Guide
What's in the box?
x Rechargeable battery (BT-1021)
x Battery cover
x AC adapter (PS-0035)
x Telephone cord
x If any items are missing or damaged, contact our
Customer Care Line immediately. Never use
damaged products!
x Call waiting, CID, CIDCW, and Voice Mail are
telephone line services. Contact your provider for
details.
x Need help? Get answers 24/7 at our website: www.
uniden.com.
2 - English
GETTING STARTED
Installing Your Phone
Charge the Baery
1. Unpack the handset, battery pack, and battery cover. If you need to remove the cover, press in on the notch and slide the
cover down and off.
2. Line up the battery connector with the jack inside the handset; the connector only fits one way.
3. Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected.
4. Replace the battery cover and slide it into place.
5. Use the AC adapter to connect the power jack on the base to a regular indoor (120V AC) power outlet.
6. Place the handset in the base with the display facing forward. If the display doesn’t light up, reseat the handset or connect
the base to a different outlet.
# Charge the handset completely (about 15 hours) before using.
Connect the Telephone Cord
Use the telephone cord to connect the
TEL LINE
jack on the base to a standard telephone wall jack.
# If the display says Check Tel Line, check the connection between the base and the phone jack.
Test the Connecon
Make a quick test call. Pick up the handset and press
TaLk/fLash
. (Press
ENd
to hang up.)
x If there’s a lot of noise, check for interference (see p. 6).
x If you keep hearing a dial tone, change to pulse dialing (see below).
Changing from Tone to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone’s dial mode.
1. Press
MENu/sELEcT
and select Global Setup.
2. Select Dial Mode then Pulse. You’ll hear a confirmation tone.
To send DTMF tones during a call (e.g., for an automated response system), press
*
to temporarily switch to tone dialing. When
you hang up, the phone automatically returns to pulse dialing.
Geng to Know Your Phone
Base
Key What it does
fINd
In standby: page the handset.
Handset
Key (icon) What it does Key (icon) What it does
caLLEr Id/
rIGhT
x In standby or during a call: open the CID list.
x In any menu or list: go to the next screen.
ENd
x During a call: hang up.
x In any menu or list: exit and go to standby.
MEssaGE/
MuTE/cLEar
(
)
x In standby: access your voice mail service.
x During a call: mute the microphone.
x While the phone is ringing: ignore this call (mute
the ringer).
x When entering text or numbers: erase the
character at the cursor (press and hold to erase
all characters).
rEdIaL/
pausE
x In standby: open the redial list.
x While entering a phone number: insert a
2-second pause.
Earpiece
Display
Status
PHONEBOOK/
LEFT
CALLER ID/
RIGHT
UP/DOWN
Microphone
12-key dial pad
MESSAGE/
MUTE/CLEAR
END
TALK/
FLASH
MENU/
SELECT
REDIAL/
PAUSE
Charging
contacts
FIND
English - 3
Key (icon) What it does Key (icon) What it does
phoNEbook/
LEfT (
)
x In standby or during a call: open the phonebook.
x In any menu or list: go back to the previous screen.
TaLk/
fLash
x In standby: start a telephone call (get a
dial tone).
x During a call: switch to a waiting call.
up/dowN
(
)
x In standby: increase/decrease the ringer volume.
x During a call: increase/decrease the volume.
x In any menu or list: move the cursor up one line.
MENu/
sELEcT
x In standby: open the menu.
x In any menu or list: select the highlighted
item.
LED What it means
sTaTus
x On: the battery is charging.
x Blinking: there are new messages.
Reading the Display
The icons appear based on what you're doing with the phone.
Icon What it means Icon What it means
You have a voice message waiting.
The battery is 1) fully charged, 2) half
charged, 3) getting low, or 4) empty.
T-coil mode is on (see p. 4).
The microphone is muted; the caller can’t
hear you.
The ringer is turned off and will not ring for
new calls.
[Aa] [aA] Enter 1) capital or 2) lower case letters.
Entering Text on Your Phone
x Use the 12-key dial pad anytime you want to enter text into your phone (e.g. a name in the phonebook).
x If two letters in a row use the same key, enter the first letter; wait for the cursor to move to the next space and enter the second
letter.
To... Press... To... Press...
move the cursor left
phoNEbook
/
LEFT.
enter a blank space
#
.
move the cursor right
caLLEr Id/rIGhT
. switch between upper and lower case letters
*
.
erase the character at the cursor
MEssaGE/MuTE/
cLEar
rotate through the punctuation and symbols
0
.
erase the entire entry
and hold
MEssaGE/MuTE/
cLEar
.
Using the Menu
Handset Setup
Day & Time
Global Setup
To open the
menu, press
MENU/SELECT.
Press MENU/SELECT
to choose the
highlighted option
.
press END
to exit the
menu
.
To go back a
screen, press
PHONEBOOK/LEFT
The cursor
shows the
highlighted
option.
To move the
cursor, use
UP & DOWN.
OR
<HANDSET SETUP>
T-coil
Ringer Tones
Loading...