Uniden DCX 490 User Manual

Checking the Package Contents

Make sure you have received the following items in the package.
If any of these items are missing or damaged, contact the
Uniden Parts Department.

Your DCX 490 will work with the
following units:

DCT 4960
DCT 4960-2
DCT 4980

Charger

Battery pack

(BP-490)

Uniden Parts Department at [phone]

Hours: M-F 7:00 a.m. to 5:00 p.m. CST.

We can also be reached on the web at

www.uniden.com

Cordless Handset

AC adapter

(AD-490)

– 2 –

Beltclip

Install the battery pack

Charge the battery pack for at least 12-15 hours before
plugging the phone line into your phone.

Press in on the battery cover

1

release and slide the cover down
until it comes off.

Connect the battery pack

2

connector observing the correct
polarity (black and red wires) to
the jack inside the battery
compartment.

Do not exert any force on this
connection. It could cause damage to
the battery or to the handset. The
plastic connectors will fit together in
only one way.

Once you are certain that you have
made a good connection, then insert
the battery pack into the battery
compartment. Do not pinch the wires.

Securely close the battery

3

compartment cover by sliding it
until it snaps into place.

Place the handset in the charging

4

cradle.

When the battery is charged, the LCD
will display “
for 5 to 10 seconds.

Initializing...”

Use only the Uniden battery
(BP-490) supplied with your
phone. Replacement batteries
are also available through the
Uniden Parts Department.
(See page 2)

– 3 –