Uniden D2380-3H, D2380-3 Owner's Manual
D2380 Series User's Guide
What's in the box?
D2380 base with
answering system
and cordless
handset
You will also nd:
Accessory handset
and charger
Not pictured:
x Rechargeable battery
(BT-1022 or BT-1031)
x Belt clip
x Battery cover
x AC adapter (PS-0035)
If you purchased
model number:
You should
have:
D2380 None
D2380-2 1 of each
Battery
cover
Not pictured:
x Rechargeable battery
(BT-1022 or BT-1031)
x AC adapter (PS-0035)
x Telephone cord
x Belt clip
...
D2380-11 10 of each
D2380-12 11 of each
* If the model number ends in R,
your package includes a DRX100
range extender. Refer to the
...
DRX100 User’s Guide for details.
• If any items are missing or damaged, contact our Customer Care Line immediately.
Never use damaged products!
• Need help? Get answers 24/7 at our website: w ww.uniden.com.
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line*
need a replacement part or an
accessory
need special assistance due to a
disability
* Duri ng regular b usiness hour s, Central St andard Time ; see our website for d etailed bus iness hours.
© 2012 Uniden America Corp. Printed in Vietnam
Ft. Worth, Texas U01UN413BZC(0)
Parts Department* 800-554-3988
Accessibility Help Line
817-858-2929 or
800-297-1023
800-874-9314
(voice or TTY)
Getting Started ....................................... 3
Installing Your Phone ............................... 3
Getting to Know Your Phone ................. 4
Parts of the Base ......................................... 4
Parts of the Handset ................................. 5
Reading the Display ................................. 6
Using the Handset Menu
.................... 7
Entering Text on Your Phone ................. 9
Using Your Phone .................................... 9
Finding a Lost Handset ......................... 10
Changing the Volume ........................... 10
Using the Caller ID and Redial Lists .. 10
Using Call Waiting .................................... 11
Using an Optional Headset .................. 11
Using the Phonebooks .......................... 12
Using Special Features ......................... 13
Silent Mode ................................................ 13
Call Block ..................................................... 13
Multihandset Features ........................... 14
Chain Dialing ............................................. 15
Voice Message Notication .................. 15
Using the Answering System .............. 16
Answering System Options
(
Answering Setup
) .............................. 16
Personalizing the Greeting ................. 16
Accessing the Answering System ...... 17
Using the System While You're Away
from Home ............................................. 18
Important Information ......................... 19
Solving Problems ..................................... 19
Resetting Handsets ................................ 21
Registering Handsets ............................ 21
Important Safety Instructions!
When using your telephone equipment, basic safet y precautions should always be
followed to reduce the risk of fire, electric shock and injury to persons, including the
following:
• This unit is NOT waterproof. DO NOT expose it to rain or moisture.
• Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
• Avoid using a telephone (other than a cordless ty pe) during an electrical storm.
There may be a remote risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• Use only the power cord and batteries indicated in this manua l. Do not dispose of
batteries in a fire. They may explode. Check with local codes for possible special
disposal instructions.
• Do not place the handset in any charging cradle without t he battery installed and
the battery cover securely in place.
SAVE THESE IN STRUCTIONS !
CAUTION ! Risk of explo sion if batter y is replaced by an i ncorrect ty pe! Dispose of u sed batterie s
accordi ng to the instru ctions. Do not o pen or mutilate t he battery. Di sconnect the b attery
befor e shipping this p roduct.
For more details, see the Important Information section.
What’s in the manual?
2 - English
GETTING STARTED
Installing Your Phone
Charge the Battery
1. Unpack all handsets,
battery packs, and
battery covers. If you
need to remove a
cover, press in on the
notch and slide the cover down and
off.
2. Line up the battery connector with
the jack inside the handset; the
connector only fits one way.
3. Push the connector in until it clicks
into place; tug gently on the wires
to make sure the battery is securely
connected.
4. Replace the battery cover and slide it
into place.
5. Use an AC adapter to connect the
power jack on the base to a regular
indoor (120V AC) power outlet.
Connect any chargers the same way.
6. Place a handset in the base with
the display facing forward. If the
Status LED doesn’t light up, reseat
the handset or connect the base
to a different outlet. For 2 or more
handsets, place each handset in a
charger.
# Charge all handsets completely
(about 15 hours) before using.
Connect the Telephone Cord
Use the telephone cord to connect the
TEL LINE jack on the base to a standard
telephone wall jack.
Test the Connection
1. Pick up t he handset and press
. The handset sounds a dial
FLASH
tone, and the display shows
Talk
TALK/
.
– If you don't hear a dia l tone or the
display says
the connection between the base
and the phone jack.
2. Make a quick test call. (Press
hang up.)
– If you keep hearing a dial tone,
change to pulse dialing.
– If there’s a lot of noise, check for
interference (see page 20).
3. Test all handsets the same way. If
you can't get a dial tone, move the
handset closer to the base.
Check Tel Line ,
check
End
to
Changing to Pulse Dialing
Your phone uses tone dialing by default.
If your phone company uses pulse
dialing, you need to cha nge your phone’s
dial mode.
1. Press
MEnu/SELEc T
Setup
.
2. Select
To send DTMF tones during a call (e.g.,
for an automated response system),
press
dialing. When you hang up, the phone
automatically returns to pulse dia ling.
Dial Mode
hear a confirmation tone.
to temporarily switch to tone
*
; choose
then
Pulse
Global
. You’ll
Attaching the Belt Clip
Line up the holes on each side of the
handset. Insert the belt clip into the
holes on each side of the handset. Press
down until it clicks.
To remove the belt clip, pu ll either side
of the belt clip to release the tabs from
the holes.
Attaching Optional Wall Mount
Bracket
You can order a wall-mount bracket
from the Uniden website. Follow the
instructions that come with the bracket.
English - 3
GETTING TO KNOW YOUR PHONE
Parts of the Base
ANSWER
ON/OFF
Message
REV
counter
DELETE
VOLUME
UP/DOWN
Charging
contacts
Key (icon) What it does
AnSwEr On/OFF ( )
x In standby: turn the answering system on and off
x In a message’s first 2 seconds: go to the previous message.
rEv ( )
x Anytime after that: restart the current message.
x During a call: switch to a waiting call.
x When the phone is ringing: ignore this call (mute the ringer).
PLAy/STOP ( )
x In standby: begin message playback.
x While screening calls: mute Call Screen.
x While playing a message: stop playing messages.
uP ( )
dOwn ( )
Find HAndSET ( )
x In standby: increase the ringer volume.
x While playing a message: increase the speaker volume.
x In standby: decrease the ringer volume.
x While playing a message: decrease the speaker volume.
x In standby: page all handsets.
x When listening to messages: delete the current message.
dELETE ( )
x In standby: press twice to delete all messages.
x While playing a message: skip to the next message.
Fwd ( )
x During a call: mute the microphone.
x While the phone is ringing: ignore this call (mute the ringer).
4 - English
FIND
HANDSET
PLAY/
STOP
FWD
Parts of the Handset
Earpiece
Display
CLEAR
MENU/
UP
SELECT
12-key dial pad
END
CID
MESSAGE/
MUTE
INTERCOM
Charging
contacts
Headset jack
Status LED
Key (icon) What it does
x In standby: increase the ringer volume.
uP
( )
x During a call: increase the audio volume.
x In any menu or list: move the cursor up one line.
x Deletes the entry.
cLEAr
MEnu/SELEcT
End
cid
MESSAgE/MuTE
( )
inTErcOM
PHOnEbOOK
( )
SPEAKEr
x When entering text or numbers: erase the character at the cursor
(press and hold to erase all characters).
x In standby: open the menu.
x In the menu or any list: select the highlighted item.
x During a call: hang up.
x In the menu or any list: exit and go to standby.
x In standby or during a call: open the caller ID (CID) list.
x When entering text: move the cursor to the right.
x In standby: access your answering system.
x During a call: mute the microphone.
x While the phone is ringing: ignore this call (mute the ringer).
x In standby: start an intercom call.
x During a call: put the call on hold and start a call transfer.
x In standby or during a call: open the phonebook.
x In the menu: go back to the previous screen.
x When entering text: move the cursor to the left.
x Switch a normal call to the speakerphone (and back).
( )
x In standby: start a telephone call on your land line (get a dial tone).
TALK/FLASH
x While the land line is ringing: answer the incoming call.
x During a call: switch to a waiting call.
x In standby: decrease the ringer volume.
dOwn
( )
x During a call: decrease the audio volume.
x In any menu or list: move the cursor down one line.
PHONEBOOK
SPEAKER
TALK/
FLASH
DOWN
REDIAL/
PAUSE
Microphone
English - 5
Key (icon) What it does
P
Answering
system
status
Status
icons
Handset
and CID
info
rEdiAL/PAuSE
x In standby: open the redial list.
x When entering a phone number: insert a 2-second pause.
Reading the Display
The table shows possible status icons and
what they mean. Since the icons appear
based on what the phone is doing, you
won't see all the icons at the same time
uP
and
dOwn
You can use the
through CID lists and phonebook entries.
You can also use the
keys to jump to the next (or previous) 5
entries.
Icon What it means
[Aa] [aA]
keys to scroll
cid
and
PHOnEbOO K
The signal from the base is 1) weak through 4) strong.
The ringer is turned off and will not ring for new calls.
The speakerphone is on.
The handset is using ECO (power save) mode.
You have a voice message waiting.
T-coil mode is on (see page 7).
The battery is 1) full, 2) half charged, 3) getting low or 4) empty.
Privacy Mode is on: no other handset can join the call.
Enter 1) capital or 2) lower case letters (see page 9).
6 - English
Using the Handset Menu
Handset Setup
Answering Setup
T-coil
On
Off
T-coil
Ringer Tones
Personal Ring
Use UP and
DOWN
to
select a menu.
With the phone in standby, press
MENU/SELECT
to open the menu.
Press
MENU/SELECT
to
choose that option.
Press
PHONEBOOK
to
go back a screen
OR
press
END
to exit
the menu.
If you don't press any keys for about 30 seconds, the handset exits the menu.
During a call, use
TALK/FLA SH
to back out of the menu without hanging up.
O-Hook Menus
Your phone displays different menus depending on whether you are on-hook or offhook. Of f-hook menus are
Call Privacy
Menu (O-Hook Menu Only
This menu lets you turn Call Privacy on and off during a call. With Call Privacy
turned on, no other handsets can connect with your conversation. Going on-hook
(ending your conversation) resets Call Privacy to off.
HD Audio
Menu (O-Hook Menu Only)
This menu lets you turn high-def inition audio on a nd off for t he call you are on.
When you end the call (go on-hook), HD audio defaults to off. If you put your call
on hold, the HD audio setting does not change.
Handset Setup
Menu
You can change these settings separately for each handset.
Menu Option What it does
T-coil
Ringer Tones
Personal Ring
Call Privacy
and
HD Audio
.
)
Turn on T-coil mode to reduce noise on hearing aids
equipped with a telecoil (T-coil) feature. T-coil mode
shortens talk time, so keep your battery fully charged.
Select a phone, then choose that phone’s ring tone. As you
highlight each ring tone, you hear a sample. Press
SELEcT
to select.
Turn on personal ring so you can assign a special ring tone
to people in your phonebook. With Caller ID, this handset
uses the assigned tone when the person calls.
MEnu/
English - 7
Menu Option What it does
AutoTalk
Any Key Answer
Banner
Language
Key Touch Tone
LCD Contrast
Caller Announce
HD Audio
Answering Setup
Refer to page 16 for details on setting up your answering system.
Date & Time
Use this menu to set the clock. Enter the date and time (MM/DD/Y Y); select AM
or PM. Use
service, you can set it to provide the time (
Menu
cid
Global Setup
The settings on this menu affect all handsets. Only one handset at a time can cha nge
these menu options.
Menu Option What it does
Dial Mode
Set Line Mode
VMWI Reset
Edit Voice Mail
Edit Int’l No.
Time Adjustment
Call Blocking
See p. 13 for a detailed description of the Call Blocking feature.
Have this handset answer a call when you pick it up from
the cradle (without pressing any buttons).
Have this handset answer a call when you press any key on
the 12-key dial pad.
Change the name used on the handset's display.
Change the display language.
Have the keypad sound a tone when you press a key.
Change the contrast of the display.
Turn Text-To-Speech on or off to hear CID information.
Turn HD Audio on or off.
Menu
to move the cursor past a digit without changing it. If you have CID
Global Setup/Time Adjustment
).
Menu
Choose tone or pulse dialing (see page 3).
Do not change this setting unless instructed to by customer
service.
Reset the Voice Message Waiting Indicator (see page 15)
Enter, edit, or delete the access number for your voice mail
service (see page 15).
Enter, edit, or delete international numbers.
Select
Auto from CID
time. Select
if you want the CID function to supply the
Manual
for the system clock to do it.
Menu
8 - English
Loading...