Uniden D1760 Series, D1760-2, D1760-3, D1760-4, D1760-5 User Manual
...
D1760 base
with cordless
handset
Battery
cover
Accessory handset
and charger
If you purchased
model number:
You should
have:
D1760 None
D1760-2 1 of each
...
...
D1760-11 10 of each
D1760-12 11 of each
* If the model number ends in R,
your package includes a DRX100
range extender. Refer to the
DRX100 owner’s manual for details.
You will also nd:
Not pictured:
• Rechargeable
battery (BT-1021)
• AC adapter (PS-0035)
• Telephone cord
• If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
• Need help? Get answers 24/7 at our website: www.uniden.com.
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line*
817-858-2929 or
800-297-1023
need a replacement part or an
accessory
Parts Department* 800-554-3988
need special assistance due to
a disability
Accessibility Help Line
800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time; see our website for de-
tailed business hours.
D1760 Series User's Guide
What's in the box?
Not pictured:
• Rechargeable
battery (BT-1021)
• Battery cover
• AC adapter
(PS-0035)
© 2013 Uniden America Corp. Printed in Vietnam
Ft. Worth, Texas U01UN546BZZ(0)
2
Getting Started ................................ 3
Installing Your Phone .................................3
Getting to Know Your Phone ...................4
Using the Handset Menu ..........................6
Using Your Phone ............................. 8
Using the Phonebook .............................. 10
Using Special Features .................. 11
Silent Mode ..................................................11
Multihandset Features .............................11
Chain Dialing ...............................................13
Voice Message Notication ....................13
Important Information .................. 14
Solving Problems .......................................14
Resetting Handsets .................................. 16
Registering Handsets .............................. 16
Adapter and Battery Information ....... 16
Compliance Information .........................17
1-Year Limited Warranty ..........................19
Important Safety Instructions!
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
• This unit is NOT waterproof. DO NOT expose it to rain or moisture.
• Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
• Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local codes
for possible special disposal instructions.
• Do not place the handset in any charging cradle without the battery
installed and the battery cover securely in place.
SAVE THESE INSTRUCTIONS!
CAUTION! Risk of explosion if battery is replaced by an incorrect type!
Dispose of used batteries according to the instructions. Do not open or
mutilate the battery. Disconnect the battery before shipping this product.
For more details, see the Important Information section.
What’s in the manual?
3
Installing Your Phone
Charge the Battery
1. Unpack all handsets,
battery
packs, and
battery
covers. If
you need to
remove a
cover, press in on the notch and
slide the cover down and off.
2. Line up the battery connector
with the jack inside the handset;
the connector only fits one way.
3. Push the connector in until
it clicks into place; tug gently
on the wires to make sure the
battery is securely connected.
4. Replace the battery cover and
slide it into place.
5. Use an AC adapter to connect
the power jack on the base to a
regular indoor (120V AC) power
outlet. Connect any chargers the
same way.
6. Place a handset in the base with
the display facing forward. If
the display doesn’t light up,
reseat the handset or connect
the base to a different outlet. For
2 or more handsets, place each
handset in a charger.
# Charge all handsets
completely (about 15 hours)
before using.
Connect the Telephone Cord
Use the telephone cord to connect
the
TEL LINE
jack on the base to a
standard telephone wall jack.
Test the Connection
1. Pick up the handset and press
Talk
. The handset sounds a dial
tone, and the display shows
Talk
.
– If you don't hear a dial tone or
the display says
Check Tel Line,
check the connection between
the base and the phone jack.
2. Make a quick test call. (Press
End
to hang up.)
– If you keep hearing a dial tone,
change to pulse dialing.
– If there’s a lot of noise, check
for interference (see p. 15).
3. Test all handsets the same way.
If you can't get a dial tone, move
the handset closer to the base.
Changing to Pulse Dialing
Your phone uses tone dialing by
default. If your phone company uses
pulse dialing, you need to change
your phone’s dial mode.
1. On a handset, press
MEnu/sElEcT
and choose
Global Setup
.
2. Select
Dial Mode
then
Pulse
.
You’ll hear a confirmation tone.
To send DTMF tones during a call
(e.g., for an automated response
system), press
*
to temporarily
switch to tone dialing. When you
hang up, the phone automatically
returns to pulse dialing.
GETTING STARTED
4
Getting to Know Your Phone
Parts of the Base
Charging
Contacts
Find
Handset
Key (icon) What it does
Find hs
• In standby: page all handsets.
Parts of the Handset
Twelve-key
dial pad
UP
PHONEBOOK
SPEAKER
DOWN
CID
REDIAL/PAUSE
MESSAGE/MUTE
INTERCOM/CLEAR
END
TALK/FLASH
MENU/SELECT
Charging
contacts
Microphone
5
Key (icon) What it does
PhonEbook
( )
• In standby or during a call: open the phonebook.
• In the menu: go back to the previous screen.
• When entering text: move the cursor to the left.
sPEakEr
( )
• Switch a normal call to the speakerphone (and back).
Talk/Flash
• In standby: start a telephone call (get a dial tone).
• During a call: switch to a waiting call.
down
( )
• In standby: decrease the ringer volume.
• During a call: decrease the audio volume.
• In any menu or list: move the cursor down one line.
rEdial/PausE
• In standby: open the redial list.
• When entering a phone number: insert a 2-second pause.
MEssagE/
MuTE
( )
• In standby: access your voice mail.
• During a call: mute the microphone.
• While the phone is ringing: ignore this call (mute the ringer).
inTErcoM/
clEar
• In standby: start an intercom call.
• During a call: put the call on hold and start a call transfer.
• When entering text or numbers: erase the character at the
cursor (press & hold to erase all characters).
callEr id
( )
• In standby: or during a call: open the Caller ID list.
• When entering text: move the cursor to the right.
End
• During a call: hang up.
• In the menu or any list: exit and go to standby.
MEnu/sElEcT
• In standby: open the menu.
• In the menu or any list: select the highlighted item.
uP
( )
• In standby: increase the ringer volume.
• During a call: increase the audio volume.
• In any menu or list: move the cursor up one line.
LED What it means
sTaTus
• On: the battery is charging.
• Blinking: there are new messages.
6
Reading the Display
The table shows the possible
status icons & what they mean.
Since the icons appear based
on what the phone is doing,
you won't see all the icons at
the same time.
Icon What it means
The signal from the base is 1) strong or 2) weak.
The ringer is turned off and will not ring for new calls.
The speakerphone is on.
Privacy Mode is on: no other handset can join the call.
T-coil mode is on (see p. 7).
The battery is 1) full, 2) half charged, 3) getting low or 4) empty.
The handset is using ECO (power save) mode.
Indicates you have a new voice mail.
[Aa] [aA]
Enter 1) capital or 2) lower case letters (see p. 8).
Using the Handset Menu
If you don't press any keys for about 30
seconds, the handset
exits the menu.
During a call, use
PhonEbook
to back
out of the
menu without
hanging up.
NEW
Status
icons
Current
call info
Time &
date
CID
record
status
Handset Setup
Personal Ring
Handset Setup
Ringer Tones
Handset Setup
T-coil
Handset Setup
Date & Time
Use UP and
DOWN
to
rotate through the
options.
Press
MENU/SELECT
to
open the menu.
Press
MENU/SELECT
to choose
the current option.
Press
PHONEBOOK
to
go back a screen
OR
press
END
to exit
the menu.
Loading...