Uniden D1760 Series, D1760-2, D1760-3, D1760-4, D1760-5 User Manual

D1760 base
with cordless
handset

Battery
cover

Accessory handset
and charger

If you purchased

model number:

You should

have:
D1760 None
D1760-2 1 of each

...

...

D1760-11 10 of each
D1760-12 11 of each

* If the model number ends in R,
your package includes a DRX100
range extender. Refer to the
DRX100 owner’s manual for details.

You will also nd:

Not pictured:

• Rechargeable
battery (BT-1021)

• AC adapter (PS-0035)

• Telephone cord

• If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!

• Need help? Get answers 24/7 at our website: www.uniden.com.

If You... Contact Uniden’s... Phone Number

have a question or problem Customer Care Line*

817-858-2929 or
800-297-1023

need a replacement part or an
accessory

Parts Department* 800-554-3988

need special assistance due to
a disability

Accessibility Help Line

800-874-9314
(voice or TTY)

* During regular business hours, Central Standard Time; see our website for de-

tailed business hours.

D1760 Series User's Guide

What's in the box?

Not pictured:

• Rechargeable
battery (BT-1021)

• Battery cover

• AC adapter
(PS-0035)

© 2013 Uniden America Corp. Printed in Vietnam

Ft. Worth, Texas U01UN546BZZ(0)

2

Getting Started ................................ 3

Installing Your Phone .................................3

Getting to Know Your Phone ...................4

Using the Handset Menu ..........................6

Using Your Phone ............................. 8

Using the Phonebook .............................. 10

Using Special Features .................. 11

Silent Mode ..................................................11

Multihandset Features .............................11

Chain Dialing ...............................................13

Voice Message Notication ....................13

Important Information .................. 14

Solving Problems .......................................14

Resetting Handsets .................................. 16

Registering Handsets .............................. 16

Adapter and Battery Information ....... 16

Compliance Information .........................17

1-Year Limited Warranty ..........................19

Important Safety Instructions!

When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:

• This unit is NOT waterproof. DO NOT expose it to rain or moisture.

• Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.

• Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

• Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local codes
for possible special disposal instructions.

• Do not place the handset in any charging cradle without the battery
installed and the battery cover securely in place.

SAVE THESE INSTRUCTIONS!

CAUTION! Risk of explosion if battery is replaced by an incorrect type!
Dispose of used batteries according to the instructions. Do not open or
mutilate the battery. Disconnect the battery before shipping this product.

For more details, see the Important Information section.

What’s in the manual?

3

Installing Your Phone

Charge the Battery

1. Unpack all handsets,
battery
packs, and
battery
covers. If
you need to
remove a
cover, press in on the notch and
slide the cover down and off.

2. Line up the battery connector
with the jack inside the handset;
the connector only fits one way.

3. Push the connector in until
it clicks into place; tug gently
on the wires to make sure the
battery is securely connected.

4. Replace the battery cover and
slide it into place.

5. Use an AC adapter to connect
the power jack on the base to a
regular indoor (120V AC) power
outlet. Connect any chargers the
same way.

6. Place a handset in the base with
the display facing forward. If
the display doesn’t light up,
reseat the handset or connect
the base to a different outlet. For
2 or more handsets, place each
handset in a charger.

# Charge all handsets

completely (about 15 hours)
before using.

Connect the Telephone Cord

Use the telephone cord to connect
the

TEL LINE

jack on the base to a

standard telephone wall jack.

Test the Connection

1. Pick up the handset and press

Talk

. The handset sounds a dial

tone, and the display shows

Talk

.

– If you don't hear a dial tone or

the display says

Check Tel Line,

check the connection between
the base and the phone jack.

2. Make a quick test call. (Press

End

to hang up.)

– If you keep hearing a dial tone,

change to pulse dialing.

– If there’s a lot of noise, check

for interference (see p. 15).

3. Test all handsets the same way.
If you can't get a dial tone, move
the handset closer to the base.

Changing to Pulse Dialing

Your phone uses tone dialing by
default. If your phone company uses
pulse dialing, you need to change
your phone’s dial mode.

1. On a handset, press

MEnu/sElEcT

and choose

Global Setup

.

2. Select

Dial Mode

then

Pulse

.

You’ll hear a confirmation tone.

To send DTMF tones during a call
(e.g., for an automated response
system), press

*

to temporarily
switch to tone dialing. When you
hang up, the phone automatically
returns to pulse dialing.

GETTING STARTED

4

Getting to Know Your Phone

Parts of the Base

Charging
Contacts

Find
Handset

Key (icon) What it does

Find hs

• In standby: page all handsets.

Parts of the Handset

Twelve-key
dial pad

UP

PHONEBOOK

SPEAKER

DOWN

CID

REDIAL/PAUSE

MESSAGE/MUTE

INTERCOM/CLEAR

END

TALK/FLASH

MENU/SELECT

Charging

contacts

Microphone

5

Key (icon) What it does

PhonEbook

( )

• In standby or during a call: open the phonebook.

• In the menu: go back to the previous screen.

• When entering text: move the cursor to the left.

sPEakEr

( )

• Switch a normal call to the speakerphone (and back).

Talk/Flash

• In standby: start a telephone call (get a dial tone).

• During a call: switch to a waiting call.

down

( )

• In standby: decrease the ringer volume.

• During a call: decrease the audio volume.

• In any menu or list: move the cursor down one line.

rEdial/PausE

• In standby: open the redial list.

• When entering a phone number: insert a 2-second pause.

MEssagE/
MuTE

( )

• In standby: access your voice mail.

• During a call: mute the microphone.

• While the phone is ringing: ignore this call (mute the ringer).

inTErcoM/
clEar

• In standby: start an intercom call.

• During a call: put the call on hold and start a call transfer.

• When entering text or numbers: erase the character at the
cursor (press & hold to erase all characters).

callEr id

( )

• In standby: or during a call: open the Caller ID list.

• When entering text: move the cursor to the right.

End

• During a call: hang up.

• In the menu or any list: exit and go to standby.

MEnu/sElEcT

• In standby: open the menu.

• In the menu or any list: select the highlighted item.

uP

( )

• In standby: increase the ringer volume.

• During a call: increase the audio volume.

• In any menu or list: move the cursor up one line.

LED What it means

sTaTus

• On: the battery is charging.

• Blinking: there are new messages.

6

Reading the Display

The table shows the possible
status icons & what they mean.
Since the icons appear based
on what the phone is doing,
you won't see all the icons at
the same time.

Icon What it means

The signal from the base is 1) strong or 2) weak.

The ringer is turned off and will not ring for new calls.

The speakerphone is on.

Privacy Mode is on: no other handset can join the call.

T-coil mode is on (see p. 7).

The battery is 1) full, 2) half charged, 3) getting low or 4) empty.

The handset is using ECO (power save) mode.

Indicates you have a new voice mail.

[Aa] [aA]

Enter 1) capital or 2) lower case letters (see p. 8).

Using the Handset Menu

If you don't press any keys for about 30

seconds, the handset

exits the menu.

During a call, use

PhonEbook

to back
out of the
menu without
hanging up.

NEW

Status

icons

Current

call info

Time &

date

CID
record
status

Handset Setup

Personal Ring

Handset Setup

Ringer Tones

Handset Setup

T-coil

Handset Setup
Date & Time

Use UP and

DOWN

to

rotate through the

options.

Press

MENU/SELECT

to

open the menu.

Press

MENU/SELECT

to choose

the current option.

Press

PHONEBOOK

to

go back a screen

OR

press

END

to exit

the menu.

7

Handset Setup

Menu

You can change these settings separately for each handset.

T-coil

Turn on T-coil mode to reduce noise on hearing aids
equipped with a telecoil (T-coil) feature. T-coil mode
shortens talk time, so keep your battery fully charged.

Ringer Tones

Choose this handset's ring tone. As you highlight each
ring tone, the phone plays a sample. When you hear
the tone you want, press

MEnu/sElEcT

.

Personal Ring

Turn on personal ring so you can assign a special ring
tone to people in your phonebook. With Caller ID, this
handset uses the assigned tone when the person calls.

AutoTalk

Have this handset answer a call when you pick it up
from the cradle (without pressing any buttons).

Any Key Answer

Have this handset answer a call when you press any
key on the 12-key dialpad.

Banner

Change the name used on the handset's display.

Handset Language

Change the display language.

Key Touch Tone

Have the keypad sound a tone when you press a key.

Date & Time

Menu

Use this menu to set the clock. Enter the date and time (MM/DD/YY);
select

AM

or

PM

. Use

cid

to move the cursor past a digit without changing

it. If you have CID service, you can set it to provide the time (

Global Setup/

Time Adjustment

).

Global Setup

Menu

The settings on this menu affect all handsets. Only one handset at a time
can change these menu options.

Dial Mode

Choose tone or pulse dialing (see p. 3).

Edit Voice Mail

Edit your voice mail access number (see page 14).

Set Line Mode

Do not change this setting unless instructed to by
customer service.

Voice Mail Tone

Turn the tone indicating a new voice mail on or off.

VMWI Reset

Reset the Voice Message Waiting Indicator (see p. 13).

Time Adjustment

Select

Set by Caller ID

to allow phone network to

automatically set cordless phone system time.

8

Entering Text on Your Phone

• Use the 12-key dial pad anytime you want to enter text into your phone
(a name in the phonebook, the handset banner, etc.).

• If two letters in a row use the same key, enter the first letter; wait for the
cursor to move to the next space and enter the second letter.

To... Press...

move the cursor left

PhonEbook

.

move the cursor right

cid

.

erase the character at the cursor

inTErcoM/clEar

.

erase the entire entry and hold

inTErcoM/clEar

.

enter a blank space

#

.

switch between upper and lower case letters

*

.

rotate through the punctuation and symbols

0

.

USING YOUR PHONE

This section explains the most common functions on the phone.

To...

Using the
earpiece

Using the
speakerphone

make a call, dial the number & press

Talk/Flash

. press

sPEakEr

.

answer a call press

Talk/Flash

. press

sPEakEr

.

hang up press

End

or put the handset in the cradle.

ignore a call/mute the ringer

press

MEssagE/MuTE

while the phone is

ringing.

switch to the speaker & back press

sPEakEr

.

mute the microphone during
a call

press

MEssagE/MuTE

(press again to turn the

microphone back on).

put a call on hold press

inTErcoM/clEar*

.

return to a call on hold press

Talk/Flash

. press

sPEakEr

.

make a speed dial call

press and hold the speed dial number
for 1.5 seconds. After you verify that the
system is displaying the correct phonebook
data for that speed dial number, press

Talk/

Flash

or

sPEakEr

on the handset.

* Aer 5 minutes on hold, the call will be disconnected.

9

Assigning a Speed Dial Number

You can assign a speed dial number to a phonebook entry when you create
that entry for the first time (or when you edit it). Press

PhonEbook

and

select

Create New

. As you enter the phonebook number, one of the options
you will see is to assign a speed dial number to that phonebook entry. You
can assign up to 10 speed dials, 0 - 9.

Finding a Lost Handset

With the phone in standby, press

Find hs

on the base. All handsets beep for

1 minute; to cancel, press

Find hs

again or press any handset key.

Changing the Volume

To change the... When... Press...

earpiece or speaker
volume for each handset

you are listening to that
earpiece or speaker (playing
messages, etc.)

uP

to increase

the volume.

down

to

decrease it.

ringer volume for each
handset*

the phone is in standby

* If you turn the ringer all the way down, that particular ringer turns o.

Using the Caller ID and Redial Lists

Caller ID (CID) is a service available from your telephone provider that
shows the phone number (and sometimes the caller’s name) of incoming
calls. Contact your telephone provider for more information.

Caller ID list Redial list

• The phone saves the information for the last 50
received calls to the CID list. The

NEW

icon marks any

calls received since the last time you checked the list.

• All handsets share the same CID list so only one
handset can access the list at a time.

• In standby, handsets show how many calls came in
since the last time you checked the CID list.

• Each handset
remembers the
last 5 numbers
you dialed on it.

• Only one handset
can access its
redial list at a time.

To… Press...

open the CID list

cid

.

open the redial list

rEdial/PausE

.

scroll through the
lists

down

to scroll from newest to oldest.

uP

to scroll from oldest to newest.

10

To… Press...

dial the
highlighted
number

Talk/Flash

or

sPEakEr.

(If the number is a toll call but there is no 1 at the
beginning, press * to add 1 before dialing.)

close the lists

PhonEbook

.

For individual record options, highlight a number and press

MEnu/sElEcT

:

Delete Entry

Erase the number from the list.

Store Into Pb

Add the number to the phonebook. The handset prompts
you to edit the name and number and select a personal ring.

Delete All

(CID list only) Erase all numbers from the list.

Using Call Waiting

• Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.

• If you get a Call Waiting call, the phone sounds a tone and displays
any CID information received from the waiting call. Press

Talk/Flash

to switch between the current call and the waiting call; each time you
switch, there is a short pause before you're connected to the other call.

Using the Phonebook

The phone can store up to 100 entries in its phonebook. All handsets share
the same phonebook, so only one handset can access it at a time.

To... Press...

open/close the phonebook

PhonEbook

.

scroll through the entries

down

to scroll through the entries from A to Z.

uP

to scroll from Z to A.

jump to entries that start
with a certain letter

the number key corresponding to the letter
you want.

dial the current entry

Talk/Flash

or

sPEakEr

.

edit the current entry

MEnu/sElEcT

, then select

Edit

.

delete the current entry

MEnu/sElEcT

, then select

Delete

. When the

phone prompts you to confirm, select

Yes

.

make a speed dial call

Press and hold the speed dial number (0 - 9)
for 1.5 seconds. The speed dial entry displays.
Press

Talk

or

sPEakEr

to dial the number.

11

Adding Phonebook Entries

With the phone in standby, open the phonebook. Press

MEnu/sElEcT

and

select

Create New.

Enter a name, number, and then assign a speed dial

number and a personal ring if desired.

• Enter the phone number (up to 20 digits) exactly as you would dial it.

• If you need the phone to wait before sending the next set of digits, press

rEdial/PausE

to insert a 2-second pause. You can insert multiple pauses,

but each one counts as a digit (you’ll see P in the display).

Deleting All the Phonebook Entries

With the phone in standby, open the phonebook. Press

MEnu/sElEcT

and

select

Delete All

. When the phone prompts you to confirm, select

Yes

.

USING SPECIAL FEATURES

Silent Mode

You can silence the ringers on the base and all handsets for a specific
period of time.

1. With the phone in standby, press and hold

#

on any handset. The phone

prompts you to select the number of hours (1 - 9 or

Always On

) that you

want it to stay in silent mode.

2. To confirm, press

#

or just wait about 5 seconds. The phone turns on the

answering system and displays

Silent Mode On

on each handset.

3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold

#

again.

Multihandset Features

# To use the features in this section, you need at least 2 handsets.

• Your base supports a total of 12 cordless handsets: the one that came

with the base and up to 11 DCX170 accessory handsets. Your base also
supports a total of 2 DRX100 range extenders, including any that came
with your phone. If you have any DWX handsets, the D1760 is limited to
a total of 6 accessory handsets.

• You must register accessory handsets to the base before using them.

(Handsets that came packaged with the base are already registered.)

• Handsets that aren’t registered display a Not Registered message. For

registration instructions, see p. 16, or see the accessory handset manual.

12

• If a handset was ever registered to a base, you must reset it before it can
register to a new base; see p. 16, or see the accessory handset manual.

Conference Calling

• When an outside call comes in, two handsets can join in a conference
call with the outside caller.

• To join a call that’s already in progress, just press

Talk/Flash

or

sPEakEr

.

• To leave the conference call, hang up normally; the other handset
remains connected to the call.

Call Transfer

To... Press...

transfer a call

inTErcoM/clEar

. The phone puts the call on hold and
prompts you to select the handset you want to page.
When the other handset accepts the call, you'll be
disconnected (press

Talk/Flash

to rejoin the call).

cancel a transfer

Talk/Flash

to return to the call.

accept a
transferred call

inTErcoM/clEar

to answer the page and speak to the other

handset. Then, press

Talk/Flash

to speak to the caller.

Privacy Mode

To activate privacy mode on a call in progress, press

MEnu/sElEcT

twice.
As long as privacy mode is on, you'll see a in the display, and no other
handsets can join your call. Privacy mode turns off automatically when
you hang up; you can also turn it off by pressing

MEnu/sElEcT

twice.

Handset to Handset Intercom

• Whenever the phone is in standby, you can make an intercom call

between handsets without using the phone line.

• You can make an intercom call from any handset, but only two handsets

can be in an intercom call at any time.

• If an outside call comes in during an intercom page, the phone cancels

the page so you can answer the incoming call.

• If an outside call comes in during an intercom call, press

Talk/Flash

to

hang up the intercom call and answer the outside call.

To... Press...

make an intercom
page

inTErcoM/clEar.

Select the handset you want to talk

with, or

All

to page all handsets at the same time.

13

To... Press...

cancel a page

End

.

answer a page

inTErcoM/clEar

or

Talk/Flash

.

end an intercom call

End

. Both handsets return to standby.

Chain Dialing

If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.

1. Enter the code number (up to 20 digits) into the phonebook just like
a regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.

2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.

3. Press

MEnu/sElEcT

to send the code. If you change your mind, just close

the phonebook.

Voice Message Notication

If you subscribe to a voice mail service, your phone displays the voice
mail icon ( ) when you have a new message. This feature supports
Frequency-Shift Keying (FSK) and Stutter Dial Tone (SDT) notification,
which you can turn on and off through

Global Setup/Voice Mail Tone

.

After you listen to your messages, the message icon turns off. If it doesn’t,
you can reset it: With the phone in standby, open the menu and select

Global Setup

; select

VMWI Reset

, then select

Yes.

Setting Up Voice Mail Access

If you have voice mail access through your service provider, you can
program that access number into your phone and then just press one key
to dial -

MEssagE/MuTE

. You will set up an access code to your account, and
you can either enter that manually after you have accessed the voice mail
or you can program that into your phone, too.

1. Press

MEssagE/MuTE

. If no voice mail access number has been set up, the

system prompts you to do that now.

2. Enter the provider’s voice mail access number. Press

MEnu/sElEcT

to set

the number.

3. The screen displays

DONE!

14

4. To access your provider’s voice mail service now, press

MEssagE/MuTE

.
The system will dial the voice mail service and you can enter your
security code manually when prompted.

Editing Your Voice Mail Number

You can add your voice mail security code to the voice mail number string.

1. Press

MEnu/sElEcT

, then scroll to

Global Setup/Edit Voice Mail

.

2. Enter your voice mail number again, then press

rEdial/PausE

twice to

enter 2 2-second pauses. Next, enter your security code.

3. Press

MEnu/sElEcT

when you are finished. The system displays

DONE!

4. To access your provider’s voice mail service now, just press

MEssagE/

MuTE

. The system will dial the access number, wait 4 seconds, and then

it will dial the security code.

IMPORTANT INFORMATION

Solving Problems

If you have any trouble with your phone, check this section first. If you
need help, call our Customer Care Line listed on the front cover.

General problems Possible solutions

No handsets can make or
receive calls.

• Check the telephone cord connection.

• Disconnect the base AC adapter for a few
minutes; then reconnect it.

A handset can’t make or
receive calls.

• Move the handset closer to the base.

A handset can make calls,
but it won’t ring.

• Make sure the ringer is turned on.

• Make sure Silent Mode is turned off (see p. 10).

A handset is not working.

• Charge the battery for 15-20 hours.

• Check the battery connection.

The phone keeps ringing
when I answer on an
extension.

• You may have to change the line mode.
Contact Customer Service for instructions.

Audio issues Possible solutions

Callers sound
weak or soft.

• Move the handset closer to the base.

• Keep the handset’s battery fully charged.

• Increase the earpiece volume.

15

Audio issues Possible solutions

There’s a lot of
noise or static on
the line

• Check for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors,
WiFi equipment, etc.). Move the handset or base away
from the interference source.

• If you use a telecoil hearing aid, turn on T-coil mode
(see p. 7).

• If you have any service that uses the phone line, add a
DSL or telephone line filter (see below).

Caller ID problems Possible solutions

No handsets display
Caller ID information.

• Let calls ring twice before answering.

• Make sure your Caller ID service is active.

Caller ID displays briefly
and then clears.

• You may have to change the line mode.
Contact Customer Service for instructions.

Multi-handset problems Possible solutions

I can’t transfer calls.

• Reset the handset (see p. 16).

Two handsets can’t talk to a caller.

• See if any handset is in Privacy Mode.

A handset says

Unavailable

.

• Move the handset closer to the base.

• See if any handset is in Privacy Mode.

I can’t register a new handset.

• Reset the handset (see p. 16).

• See if you have 12 registered handsets.

Installing a Line Filter or DSL Filter

A telephone line lter or DSL lter prevents services that use the phone line from
causing interference on your phone. To get a line lter, contact your service pro­vider or look in an electronics store.

Plug the lter into the telephone wall jack and plug the base into the lter. Make a
test call to make sure the noise is gone.

Liquid Damage

CAUTION: If the base is covered in liquid, disconnect the adapter & phone
cord from the wall before touching it.

If the liquid is only on the exterior housing of the base or handset, wipe it o and
use as normal. If you can hear liquid inside the housing:

1. Remove all compartment covers, and disconnect all cables and cords.

2. If liquid is leaking from any vent or hole, turn the phone so that vent faces
down. If not, place the largest vent face down.

3. Let dry for at least 3 days. Check for liquid inside the phone before replacing
compartment covers & reconnecting cords.

16

Resetting Handsets

If you have trouble with a handset or
if you want to replace one, clear the
registration information from the base
and the handset:

1. Press & hold

End

and # at the same

time until you see the

System Reset

menu.

2. If you still have the base the handset
is registered to, select

Deregister HS

,
then select the handset you want
to reset. If you don’t have that base
anymore, select

Base Unavailable

.

3. To conrm, select

Yes

. e handset

displays

Handset not registered

.

Registering Handsets

If you see a “not registered” message on
a handset, you must register it to a base
before using it.

1. Place the handset in the base;
the display should say

Handset

Registering

.

2. Wait until the display says

Registration Complete

(about 30
seconds), then pick up the handset
and press

Talk/Flash

.

3. If you don’t hear a dial tone or the
display says

Registration Failed

,
charge the battery completely, then
try again.

Adapter and Battery
Information

AC adapter

Part number PS-0035
Input voltage 120V AC, 60 Hz
Output voltage 8V AC @ 300mA
x Use only the supplied AC adapters.

x Use the proper adapter for the base &

any chargers.

x Do not place the unit in direct sunlight

or subject it to high temperatures.

Battery pack (with normal use)

Part number BT-1021
Capacity 300mAh, 2.4V DC
Talk time about 7 hours
Standby time about 7 days
Battery life about 1 year

x Replace the battery when the talk or

standby time becomes noticeably re­duced. For replacements, call the Parts
Department (see the front cover).

x When the battery gets low, the handset

beeps and shows a low battery alert; put
the handset in the cradle for recharg­ing.

Rechargeable Battery Warning

x is equipment contains a recharge-

able Nickel-Metal-Hydride (Ni-MH)
battery.

x Nickel is a chemical known to the state

of California to cause cancer.

x Do not short-circuit the battery.
x e batteries in this equipment may

explode if disposed of in a re.

x Do not charge the batteries in any char-

ger other than the one specied in the
owner's manual. Using another charger
may damage the battery or cause it to
explode.

x As part of our commitment to

protecting our
environment and
conserving natural
resources, Uniden
voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH batteries within
the United States. Please call
1-800-8-BATTERY for information on
Ni-MH battery recycling in your area.
(RBRC® is a registered trademark of the
Rechargeable Battery Recycling
Corporation.)

Rechargeable batteries must be
recycled or disposed of properly.

17

Warning! The cords on this
product and/or accessories contain
lead, a chemical known to the
state of California to cause birth
defects or other reproductive
harm. Wash hands after handling.

Uniden works to reduce lead
content in our products &
accessories.

Compliance Information

FCC Part 68 Information

is equipment complies with Part
68 of the FCC rules and the require­ments adopted by the ACTA. On the
bottom of this equipment is a label that
contains, among other information,
a product identier in the format US:
AAAEQ##TXXXX. If requested, this
number must be provided to the phone
company.

An applicable Universal Service
Order Codes (USOC) certication for
the jacks used in this equipment is
provided (i.e., RJ11C) in the packaging
with each piece of approved terminal
equipment. A plug and jack used to
connect this equipment to the premises
wiring and telephone network must
comply with the applicable FCC Part
68 rules and requirements adopted by
the ACTA. A compliant telephone cord
and modular plug is provided with
this product. It is designed to be con­nected to a compatible modular jack
that is also compliant. See installation
instructions for details.

e REN is used to determine the
number of devices that may be con­nected to a phone line. Excessive RENs
on a phone line may result in devices
not ringing in response to an incom­ing call. In most but not all areas, the
sum of RENs should not exceed ve
(5.0). To be certain of the number of
devices that may be connected to a

line, as determined by the total RENs,
contact the telephone provider. e
REN for this product is part of the
product identier that has the format
US:AAAEQ##TXXXX. e digits rep­resented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).

If this equipment causes harm to the
telephone network, the telephone com­pany will notify you in advance that
temporary discontinuance of service
may be required. But if advance notice
isn't practical, the telephone company
will notify the customer as soon as pos­sible. Also, you will be advised of your
right to le a complaint with the FCC
if you believe it is necessary. e tele­phone company may make changes in
its facilities, equipment, operations or
procedures that could aect the opera­tion of the equipment. If this happens
the telephone company will provide
advance notice in order for you to make
necessary modications to maintain
uninterrupted service.

Please follow instructions for repair­ing, if any (e.g. battery replacement
section); otherwise do not substitute or
repair any parts of the device except as
specied in this manual. Connection
to party line service is subject to state
taris. Contact the state public utility
commission, public service commis­sion or corporation commission for
information. is equipment is hearing
aid compatible.

If you experience trouble with this
equipment, contact the manufac­turer (see the cover of this manual for
contact information) or an authorized
agent. If the equipment is causing harm
to the telephone network, the telephone
company may request that you discon­nect the equipment until the problem
is resolved.

If your home has wired alarm equip­ment connected to a phone line, be sure
that installing the system does not dis-

18

able your alarm equipment. If you have
questions about what will disable alarm
equipment, contact your telephone
company or a qualied installer.

Any changes or modications to this
product not expressly approved by the
manufacturer or other party respon­sible for compliance could void your
authority to operate this product.

NOTICE: According to telephone com­pany reports, AC electrical surges, typi­cally resulting from lightning strikes,
are very destructive to telephone
equipment connected to AC power
sources. To minimize damage from
these types of surges, a surge arrestor is
recommended.

FCC Part 15 Information

is device complies with part 15 of
the FCC rules. Operation is subject to
the following two conditions: (1) is
device may not cause harmful interfer­ence, and (2) is device must accept
any interference received, including
interference that may cause undesired
operation. Privacy of communications
may not be ensured when using this
phone.

FCC PART 15.105(b): Note: is
equipment has been tested and found
to comply with the limits for a Class
B digital device, pursuant to part 15
of the FCC Rules. ese limits are
designed to provide reasonable protec­tion against harmful interference in a
residential installation. is equip­ment generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particu­lar installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment

o and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:

x Reorient or relocate the receiving

antenna.

x Increase the separation between the

equipment and receiver.

x Connect the equipment into an outlet

on a circuit dierent from that to which
the receiver is connected.

x Consult the dealer or an experienced

radio/TV technician for help.

FCC RF Exposure Information

is product complies with FCC radia­tion exposure limits under the follow­ing conditions:

x e base must be placed to allow a

minimum of 20 cm (8 inches) between
the antenna and all persons during
normal operation.

x e base must not be collocated or

operated in conjunction with any other
antenna or transmitter.

x e handset is designed for body-worn

operation and meets FCC RF exposure
guidelines when used with any belt clip,
carrying case, or other accessory sup­plied with this product. (All necessary
accessories are included in the package;
any additional or optional accessories
are not required for compliance with
the guidelines.) ird party accessories
(unless approved by the manufacturer)
should be avoided as these might
not comply with FCC RF exposure
guidelines.

Disable All Functions Except
Charging

D1760 Base

1. Plug in the AC adapter.

2. Immediately begin to press

Find hs

repeatedly on the base. All functions
will be disabled after

Find hs

is
pressed approximately 20 times in
15 seconds.

19

D1760 Handset

1. Install the battery.

2. Once

Welcome, Please wait...

disappears from the display,
press and hold

End, MEnu

, and *

simultaneously.

3. After about 5 seconds, a
confirmation tone sounds,
indicating all functions except
charging have been disabled.

To return to normal operation,
cycle the power for the base and
remove and reinstall the handset
battery

Industry Canada (I.C.) Notice

Terminal equipment

NOTICE: is equipment meets the
applicable Industry Canada Terminal
Equipment Technical Specications.
is is conrmed by the registration
number. e abbreviation IC before
the registration number signies that
registration was performed based on a
Declaration of Conformity indicat­ing that Industry Canada technical
specications were met. It does not
imply that Industry Canada approved
the equipment.

NOTICE: e Ringer Equivalence
Number (REN) for this terminal equip­ment is marked on the equipment itself.
e REN assigned to each terminal
equipment provides an indication of
the maximum number of terminals
allowed to be connected to a telephone
interface. e termination on an inter­face may consist of any combination of
devices subject only to the requirement
that the sum of the Ringer Equivalence
Numbers of all the devices does not
exceed 5.

Radio equipment

e term IC before the radio certi­cation number only signies that
Industry Canada technical specica­tions were met. Operation is subject
to the following two conditions: (1)

this device may not cause interference,
and (2) this device must accept any
interference, including interference
that may cause undesired operation of
the device. "Privacy of communications
may not be ensured when using this
telephone".

1-Year Limited Warranty

Evidence of original purchase is
required for warranty service.

WARRANTOR: UNIDEN AMERICA
CORPORATION ("Uniden")

ELEMENTS OF WARRANTY: Uniden
warrants, for one year, to the original
retail owner, this Uniden Product to
be free from defects in materials and
crasmanship with only the limitations
or exclusions set out below.

WARRANTY DURATION: is
warranty to the original user shall
terminate and be of no further eect
12 months aer the date of original
retail sale. e warranty is invalid if
the Product is (A) damaged or not
maintained as reasonable or necessary,
(B) modied, altered, or used as part of
any conversion kits, subassemblies, or
any congurations not sold by Uniden,
(C) improperly installed, (D) serviced
or repaired by someone other than an
authorized Uniden service center for a
defect or malfunction covered by this
warranty, (E) used in any conjunction
with equipment or parts or as part of
any system not manufactured by Un­iden, or (F) installed or programmed
by anyone other than as detailed by the
owner's manual for this product.

STATEMENT OF REMEDY: In
the event that the product does not
conform to this warranty at any time
while this warranty is in eect, warran­tor will either, at its option, repair or
replace the defective unit and return it
to you without charge for parts, service,
or any other cost (except shipping and

20

handling) incurred by warrantor or its
representatives in connection with the
performance of this warranty. Warran­tor, at its option, may replace the unit
with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH
ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE
PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRAN­TIES OF ANY NATURE WHATSO­EVER, WHETHER EXPRESS, IM­PLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WAR­RANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT
OF INCIDENTAL OR CONSEQUEN­TIAL DAMAGES. Some states do not
allow this exclusion or limitation of
incidental or consequential damages
so the above limitation or exclusion
may not apply to you.

LEGAL REMEDIES: is warranty
gives you specic legal rights, and
you may also have other rights which
vary from state to state. is warranty
is void outside the United States of
America and Canada.

PROCEDURE FOR OBTAINING
PERFORMANCE OF WARRANTY:
If, aer following the instructions in
the owner's manual you are certain
that the Product is defective, pack
the Product carefully (preferably in

its original packaging). Disconnect
the battery from the Product and
separately secure the battery in its
own separate packaging within the
shipping carton. e Product should
include all parts and accessories
originally packaged with the Product.
Include evidence of original purchase
and a note describing the defect that
has caused you to return it. e Prod­uct should be shipped freight prepaid,
by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155

As an Energy Star

®

Partner,
Uniden has determined
that this product meets the
Energy Star

®

guidelines for
energy eciency. Energy
Star

®

is a U.S. registered mark.

x Uniden® is a registered trademark of

Uniden America Corporation.

x e pictures in this manual are for

example only. Your phone may not
look exactly like the pictures.