Unicorn ENDAT-D2512 User Manual
ENDAT-D2512 USERS MANUAL
UNICORN COMPUT ER CORP.
ENDAT-D2512
User’s Manual
For ENDAT-D2512 PCB ver. A2 or later
Mar.22.2013
Document version: Preliminary edition
1
ENDAT-D2512 USERS MANUAL
UNICORN COMPUTER CORP.
Copyright Notice
The content of this manual has been checked for accuracy. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this
manual. The manufacturer reserves the right to make improvements or
modification to this document and/or the product at any time without prior
notice. No part of this document may be reproduced, transmitted, photocopied or
translated into any language, in any form or by any means, electronic, mechanical,
magnetic, optical or chemical, without the prior written permission of the
manufacturer.
AMD is registered trademark of AMD T echnology Incorporation
GEODE LX is registered trademark of AMD Technology Incorporation
Realtek is registered trademark of Realtek Technologies Inc.
Multiscan is a trademark of Sony Corp of America
IBM, EGA, VGA, PC/XT, PC/AT, OS/2 and PS/2 are registered trademarks of
International Business Machines Corporation
Intel® is a registered trademark of Intel Corporation
VIA is registered trademark of VIA Technology Incorporation
Plug and Play is registered trademarks of Intel Corporation
Microsoft, Windows and MS-DO S ar e trademarks of Microsoft Corporation
Award is a trademark of Phoenix Software Inc.
PCI is a registered trademark of PCI Special Interest Group
Other product names mentioned herein are used for identification purpose only and
may be trademarks and/or registered trademarks of their respective companies.
Installation Notice
The manufacturer recommends using a grounded plug to ensure proper
motherboard operation. Care should be used in proper conjunction with a
grounded power recept acle to avoid possible electrical shock. All in tegrated circuits
on this motherboard are sensitive to static electricity. To avoid damaging
components from electrost atic discharge , please do not remove the board from the
anti-static pac king before di scharging any static electricity to your body, by wearing
a wrist-grounding strap. The manufacturer is not responsible for any damage to the
motherboard due to improper operation.
2
ENDAT-D2512 USERS MANUAL
Specification:
Model ENDAT-D2512
UNICORN COMPUT ER CORP.
System Chipset
CPU Supporting
Memory
Ethernet
VGA
LVDS interface
Dual view
Serial/Print
RS 422 / 485
SATA
USB
Expansion
Watch Dog Timer
AUDIO
Intel® NM10
Intel Cedar View N2800 (Dual Core, 1.86GHz, 6.5Watt)
Intel Cedar View D2550(Dual Core, 1.86GHz, 10 Watt)
1 x 204-Pin DDR3 SODIMM sockets
support DDR3-800/1066 up to 4 GB
2 x Intel Gb LAN support by 82583V
Intel graphic GMA3600 , Maximum resolution
up to 1920 x 1200
Support 18/24/36/48bit LVDS with backlight control by standard
(maximum resolution 1920 x 1080 )
CRT + DVI, CRT + LVDS
4 ports RS-232 with power selector (+12V / Ring-in / +5V)
by COM2
2 x SATA2 connectors with AHCI support
USB 2.0 x 7 (4 external + 3 internal)
1 x PICMG 1.0 compliant PCI slot support up to 2 PCI expansions
1 x Mini-PCIe x1 Socket, 1 x SIM card socket (optional)
On-chip supports 1 to 255 seconds / minutes
On-board supports HD Audio with 1.2W amplifier
Back Panel I/O
I/O Onboard
Power Supply
Form Factor
1 x PS2 Keyboard & Mouse connector
3 x D-sub Connector for COM 1,2,3
1 x VGA
2 x RJ-45 Connector
4 x USB(2.0) Connector
1 x SPK-out
1 x PS2 Keyboard & Mouse with 2.54mm Pin Header
VGA & LPT1 with 2.0mm Box Header
COM4 with 2.54 mm Box Header
3 x USB with 2.54mm Pin Header
Speaker out, Line-in, CD-in, MIC-in, SPDIF Pin Header
8-bits digital I/O for CMOS/TTL level
(4 bit input / 4 bit output) with 2.0mm Pin Header
1 x SP/DIF + 1 x SM BUS with 2.0mm Pin Header
SIM Card Socket (optional)
DC 12V
MINI-ITX (170mm x 170mm) with 6 Layers PCB
3
ENDAT-D2512 USERS MANUAL
UNICORN COMPUTER CORP.
TABLE OF CONTENTS
CHAPTER 1. INTRODUCTION .......................................................5
1-1. FEATURES ..............................................................................................6
1-2. UNPACKING............................................................. ............................... 7
1-3. ELECTROSTATIC DISCHARGE PRECAUTIONS ...................................7
1-4. MOTHERBOARD LAYOUT .......................................................... ............ 8
CHAPTER 2. SETTING UP THE MOTHERBOARD.......................9
2-1. JUMPERS AND CONNECTORS..............................................................9
2-2. INSTALLING MEMORY..........................................................................17
2-3. SHARED VGA MEMORY.......................................................................17
2-4. WATCH DOG TIMER..............................................................................17
2-5. Digital I/O................................................................................................19
CHAPTER 3. AWARD BIOS SETUP ............................................21
STANDARD COMS FEATURES.......................................................................
ADV ANCED BIOS FEA TURES.........................................................................
ADVANCED CHIPSET FEATURES..................................................................
INTEGRATED PERIPHERALS.........................................................................
POWER MANAGEMENT SETUP.....................................................................
PnP/PCI CONFIGURATIONS...........................................................................
PC HEALTH STATUS.......................................................................................
CHAPTER 4. VGA, SDVO AND DRIVERS ...................................25
4-1. VGA FEATURE.......................................................................................25
4-2. DRIVER UTILITY INSTALLATION GUIDE..............................................26
APPENDIX A: FLASH MEMORY UTILITY...................................27
APPENDIX B: LVDS PIN ASSIGNMENT .....................................28
APPENDIX C: LIMITED WARRANTY ..........................................29
4
ENDAT-D2512 USERS MANUAL
UNICORN COMPUT ER CORP.
Chapter 1. Introduction
In order to cope with the challenges of the system performance issues and demand
of much more visually embedded system in diverse application, ENDAT-D25 1 2
system board provides the ultimate solution with Intel® Cedar View N2800 / D2550
Processors. This package offers a high performance Intel® CPU with optimal
power efficiency on the embedded market.
ENDAT-D2512 supports
maximal capacity is up to 4GB.
ENDAT-D2512 integrated Mobile Intel® Graphics GMA3600 which supports
Microsoft DirectX 10 and MPEG-2 decoder for higher visual application.
ENDAT-D2512 supports various kinds of display include VGA, DVI and LVDS;
Dual display is also feasible.
ENDAT-D2512 provides one PCI slot and one Mini-PCIe slot to support one
standard PCI and Mini-PCIe interface.
single channel DDR3 800/1066 MHz memory. The
The ideal solutions of ENDAT-D2512
- POS system
- KIOSK
- Vehicle system
- Interactive system
- Industrial controller
- Gaming system
- Medical system
- Embedded system equipment
5
ENDAT-D2512 USERS MANUAL
UNICORN COMPUTER CORP.
1-1. Features
Basic Feature:
Intel® Cedar View N2800 / D2550.
Single channel DDR3 SO-DIMM socket supports 800/1066 MHz up
to 4 GB.
Dual PCI Express interface Gigabit Ethernet chip on-board.
Intel® Graphics GMA3600.
PCI + Mini-PCIe slot support.
Four fully functional serial ports.
+12V Only DC input power
Software Support
Drivers for major embedded operating systems: Linux, Windows7.
Built-in HD Audio with 1.2W amplifier.
Ordering information:
Standard edition:
ENDAT-D2512-N8 : Cedar View N2800
ENDAT-D2512-D2 : Cedar View D2550
6
ENDAT-D2512 USERS MANUAL
UNICORN COMPUT ER CORP.
1-2. Unpacking
The motherboard comes securely packaged in a sturdy cardboard shipping carton. In
addition to the User's Manual, t h e motherboard package includes the following items:
ENDAT-D2512 System Board
One SATA HDD Cable
Serial (2.54mm) port and Parallel port(2.0mm) Cable.
LCD cable
CD with Driver utilities for on-board chipsets, VGA and LAN adapter
If any of these items is missing or damage, please contact the dealer whom you purchas e
the motherboard from. Save the shipping material and carton in the event that you want to
ship or store the board in the future.
and DVI Cable(Optional)
Note:
Leave the motherboard in its original package until you are ready to install it!
1-3. Electrostatic Discharge Precautions
Make sure you properly ground yourself before handling the motherboard, or other system
components. Electrostatic discharge can easily damage the components. Note: You must
take special precaution when handling the motherboard in dry or air-conditioned
environments.
7
ENDAT-D2512 USERS MANUAL
UNICORN COMPUTER CORP.
1-4. MOTHERBOARD LAYOUT.
8
ENDAT-D2512 USERS MANUAL
UNICORN COMPUT ER CORP.
Chapter 2. Setting up the Motherboard
2-1. Connectors / Headers and Jumpers
Connectors Overview:
Function Connectors
PS/2 MS/KB Connectors CN1
Cooling Fan Connector FAN1, FAN2
DC Power Supply Connector J2
HDD Power Connector HDDPWR1
USB Port CN9, CN11
LAN Port CN9, CN11
SATA Connector SATA1, SATA2
DDR3 RAM Socket DIMM1
CRT Output Connector COMVGA1
COM1,2 Connector CN4
COM3 Connector COMVGA1
HD Audio Speaker Output CN13
24/48 bit LCD Panel Connector LVDS1
PCI Slot PCI1
Mini PCI-E Socket MPCIE1
SIM Card Socket SIM1
Battery Socket BAT1
Box Headers, Pin Headers Overview:
Function Connectors
VGA Box Header VGA1
DVI Header DVI1
EDID Panel JP3
Printer Port Box Header LPT1
COM 4 Port Box Header CN6
USB Port Header J5,J6
PS/2 Mouse/KB Pin Header J1
External PS/2 Device Header JKBMS1
SM BUS Pin Header SMB1
Line-Out, CD-In Pin Header J7
Line-In、MIC-In Pin Header
J8
9
Loading...