Unicorn ENDAT-3810 User Manual

ENDAT-3810

User Manual

Version 1.1

Published January 2015

Version 1.0

Published July 2014

No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of UNICORN Inc.

Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by UNICORN. UNICORN assumes no responsibility for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, UNICORN does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or tness for a particular purpose.

In no event shall UNICORN, its directors, ocers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of data, interruption of business and the like), even if UNICORN has been advised of the possibility of such damages arising from any defect or error in the documentation or product.

e terms HDMI

and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”

UNICORN Website: http://www.unicorn-computer.com.tw

Contents

1 Introduction ....................................................... 5

1.1 Package Contents ......................................................... 5

1.2 Specications ................................................................. 6

1.3 Motherboard Layout ....................................................... 8

1.4 I/O Panel ........................................................................ 10

2 Installation ......................................................... 11

2.1 Screw Holes ................................................................... 11

2.2 Pre-installation Precautions ........................................... 11

2.3 Installation of Memory Modules (SO-DIMM) .................. 12

2.4 Expansion Slots (mini-PCIe and mini-PCIe/mini-SATA

Slots) .............................................................................. 13

2.5 Jumpers Setup ............................................................... 14

2.6 Onboard Headers and Connectors ................................ 16

3 UEFI SETUP UTILITY ......................................... 21

3.1 Introduction .................................................................... 21

3.1.1 UEFI Menu Bar .................................................... 21

3.1.2 Navigation Keys ................................................... 22

3.2 Main Screen ................................................................... 22

3.3 Advanced Screen ........................................................... 23

3.3.1 CPU Conguration ............................................... 24

3.3.2 Chipset Conguration........................................... 26

3.3.3 Storage Conguration .......................................... 27

3.3.4 Intel(R) Smart Connect Technology ..................... 28

3.3.5 Super IO Conguration ........................................ 29

3.3.6 ACPI Conguration............................................... 30

3.3.7 USB Conguration ............................................... 31

3.4 Hardware Health Event Monitoring Screen ................... 32

3.5 Security Screen ............................................................. 33

3.6 Boot Screen ................................................................... 34

3.7 Exit Screen .................................................................... 36

4 Software Support .............................................. 37

4.1 Install Operating System ................................................ 37

4.2 Support CD Information ................................................. 37

4.2.1 Running Support CD ............................................ 37

4.2.2 Drivers Menu ........................................................ 37

4.2.3 Utilities Menu........................................................ 37

4.2.4 Contact Information .............................................. 37

Chapter 1: Introduction

Thank you for purchasing UNICORN ENDAT-3810 motherboard, a reliable mother-

board produced under UNICORN’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to UNICORN’s commitment to

quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contain the conguration

guide to BIOS setup and information of the Support CD.

Because the motherboard specications and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modications of this manual occur, the updated version

will be available on UNICORN website without further notice. You may

nd the latest VGA cards and CPU support lists on UNICORN website as

well. UNICORN website http://www.unicorn-computer.com.tw

If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

http://www.unicorn-computer.com.tw/support.html

1.1 Package Contents

UNICORN ENDAT-3810 Motherboard (3.5” SBC (5.8-in x 4.0-in) / (148 x 102 mm))

UNICORN ENDAT-3810 Driver CD

1.2 Specications

Form Factor

Dimensions 3.5" SBC (5.8-in x 4.0-in) / (148 x 102 mm)

Processor System

CPU

ENDAT-3810-19: Intel® Atom™ E3845

ENDAT-3810-24: Intel® Celeron® J1900 Core Number

(By CPU, Max 4)

Max Speed (By CPU) Cache (By CPU) Chipset N/A BIOS UEFI

Expansion Slot

PCI 0 Mini-PCIe 1 (Half Size) + 1 (Full Size) shared with mSATA mSATA 1 (Full Size) shared with SATAII_2 PCIe 0 CFast Card

Socket

Memory

Technology Single Channel DDR3L 1066/1333 MHz SDRAM Max. 8GB Socket 1 x SO-DIMM

Graphics

Controller Intel

Gen7 Intel Graphics DX 11, OGL3.2

VRAM Shared Memory VGA Supports max. resolution 1920 x 1200

LVDS

Dual channel 24-bit, max resolution 1920 x 1200

@60Hz

HDMI

Supports HDMI 1.4a, max resolution 1920 x

1200 DVI N/A DisplayPort N/A Multi Display Yes (Dual Display)

Ethernet

Ethernet 10/100/1000 Mbps Controller GbE LAN: Realtek RTL8111G-CG Connector 2 x RJ-45

SATA

Max Data Transfer Rate

SATA2 (3.0Gb/s)

Rear I/O

VGA 1 DVI 0 HDMI 1 DisplayPort 0

Ethernet 2 USB 2 x USB 3.0 compliant Audio 1 ( Line out) Serial 0 PS/2 0

Internal Connector

USB 6 ( 3*2.54 pitch header USB 2.0 compliant) LVDS/ Inverter

1/1

VGA 0 Serial 4 (RS-232)

SATA

2x SATA2 (3.0Gb/s) (SATAII_2 is shared

with mSATA) Parallel 0 IrDA 0

GPIO 8-bit 4 x GPI + 4 x GPO

SATA PWR Output Con

Speaker Header

Watchdog Timer

Output From Super I/O to drag RESETCON# Interval 256 segments, 0,1,2…255sec/min

Power Requirements

Input PWR 9-36V DC-In using 4-pin ATX PWR Con

Power On

AT/ATX Supported

AT: Directly PWR on as power input ready

ATX: Press button to PWR on after power

input ready

Environment Temperature 0ºC – 60ºC

1.3 Motherboard Layout

AUDI O

CODE C

B IOS

Chip

1920

2224

5 6

8 9

CPU_F AN1

PWR_JP 1

JGPIO1

m ini-PCIe

TPM1

CHA_F AN1

SPEAKER1

L AN1

VGA1

LineOut

HDMI1

AT X 12V1

BL T_VOL 1

HDLED

R ESET

PLED PWRBT N

PA NEL1

m ini-PCI e/mini-SA TA

CI1

SATA_PWR 1

LV DS 1

BL T_P WR1

SET_CM1

L AN2

US B3.0 T: USB 1 B: USB 0

COM1

COM2 COM3 COM4

CI2

JGPIO_PWR11CLRMOS 1

USB4_5

USB2_3

USB0_1

BUZZ1

DDR3(Suppor tDDR3L Only)

BKT_PW R1

PNL_PW R1

SATA II_1

SATA II_2

BL T_PWM1

MSA TA_ SEL

HD_AUDIO1

JGPIO_SET1

ENDAT-3810

1 : Panel Power Selection (PNL_PWR1)

2 : ATX Power Connector

: Backlight Power Selection (BKT_PWR1)

4 :

USB2.0 Headers (USB0_1, USB2_3, USB4_5) 5 : mSATA Selection 6 : Inverter Power Control Wafer (BLT_PWR1) 7 : SATA2 Connectors (SATAII_1, SATAII_2) 8 : Backlight & Amp Volume Control

(BLT_VOL1) 9 : Backlight Control Level (BLT_PWM1) 10 :

3-Pin Chassis FAN Connector

11 :

System Panel Header

2 : SATA Power Output Connector

13 : GPIO Default Setting

14 : Clear CMOS Header 15 : Digital Input / Output Pin Header 16 : Digital Input / Output Power Select 17 : COM Port Header (COM4)

18 : ATX/AT Mode Selection

19 : COM Port Header (COM3) 20 : TPM Header 21 : COM Port Header (COM2) 22 : COM1 Pin9 PWR Setting 23 : COM Port Header (COM1) 24 : Chassis Intrusion Headers

(CI1, CI2)

25 :

Front Panel Audio Header 26 : 3W Audio AMP Output Wafer 27 : 2-Pin Buzzer Header 28 : LVDS Panel Connector 29

4-Pin CPU FAN Connector

1.4 I/O Panel

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Off 100Mbps connection

On Link Green 1Gbps connection

1 HDMI Port (HDMI1)

2 VGA Port (VGA1)

3 LAN RJ-45 Port (LAN1)*

4 LAN RJ-45 Port (LAN2)*

5 USB 3.0 Ports (USB01)

6 Line out (Green)

ACT/LINK

LED

SPEED

LED

LAN Port

Chapter 2: Installation

This is a 3.5” SBC (5.8-in x 4.0-in) form factor (148 x 102 mm) motherboard. Before

you install the motherboard, study the conguration of your chassis to ensure that

the motherboard ts into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes

Place screws into the holes to secure the motherboard to the chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded object

before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

2.3 Installation of Memory Modules (SO-DIMM)

ENDAT-3810 provides one 204-pin DDR3 (Double Data Rate 3) SO-DIMM slot,

which supports single channel DDR3L SDRAM only.

Step 1. Align a SO-DIMM on the slot such that the notch on the SO-DIMM

matches the break on the slot.

The SO-DIMM only ts in one correct orientation. It will cause permanent damage to

the motherboard and the SO-DIMM if you force the SO-DIMM into the slot at

incorrect orientation.

Step 2. Firmly insert the SO-DIMM into the slot until the retaining clips at both

ends fully snap back in place and the SO-DIMM is properly seated.

+ 25 hidden pages

Unicorn ENDAT-3810 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual