Unicorn DPF0004 Users Manual

Instruction Manual

for

Digital Photo Frame

Minimum System Requirements:

Hardware:

PC with Intel Pentium 4
128 MB RAM
50 MB Hard Drive Space
CD-ROM Drive

Software:

Microsoft Windows XP with internet connection
Digital Photo Frame – PC Link (Auto-run)

IMPORTANT INFORMATION

DO NOT CONNECT YOUR DIGIT PHOTO FRAME TO YOUR
COMPUTER UNLESS YOU HAVE READ THOROUGH THIS
INSTRCUTION MANUAL. FAIL TO DO SO MAY RESULT IN
PRODUCT DAMAGE.

IMAGES FILES IN THIS DEVICE CANNOT BE BROWSED OR
VIEWED BY PROGRAMS OTHER THAN THE ONE PROVIDED.

1

Main Features:

z Digital Photo Frame
z Clock with calendar
z Daily Alarm
z Auto power off
z 1.5V AA battery x 4

Keypad Layout

Key Name Press Once Press and hold for 2 second
UP
DOWN
MODE

Go to previous picture Go to Set Alarm mode
Go to next picture Auto slide mode, ON/OFF
Go to Time mode Power ON or OFF

Using the Photo Frame for the First time

Remove the battery door from the back of the unit and insert ne w AA batteries into the battery
compartment.

LCD is turned on.

Power ON

To turn on the device when it is power off, pres s an d h o l d MODE key. Press and hold MODE
to turn off the unit again.

2

Download Photo

Once the USB cable is plugged, it will enter USB mode and show “Connecting….” on the
screen.

Note:

Some PC’s do not have sufficient power output from their USB port, therefore batteries must
be installed in the photo frame when download photo.

PC Auto-run program will start automatically as below:

Click “Add Image” to select photo.
Selected photo will be display on the left panel.

Click “Edit” to change setting for the selected photo.

3