UNICOR HIGHTECH 315N, 315S, 315D User Manual

Press battery cover slightly and push to the direction of the arrow to open.

For the Emergency use : If [Open / Lock] button is not working, then just turn the
manual lock by nger to open.

Deadbolt

Manual Lock

Open/Lock button

▶When auto lock is set

▶When manual lock is set

Default setting is auto lock so the door
will be locked automatically in 3 seconds
after it's closed.

Press [Open / Lock] button of Back Ass'y or turn the manual lock knob to
[Locked] position to lock the door.

▶Auto locking mode

▶Manual locking mode

Auto, Manual locking mode

Attention

Auto relocking function : When the door is not opened within 7 seconds after

the lock is open, the door is relocked automatically.

Open battery cover and
press [Register button]

Open battery cover and
press [Register button]

After the door is opened, auto locking sensor detects auto locking status.
When the door is open(auto locking detect sensor is not working),
push up [Keypad cover] and press [

] button to lock the door.

[Register button]

[Register button]

(Default setting is auto locking mode.)

1. When the auto lock function is set, if the door is closed, it will be locked
automatically within 3 seconds.

2. User can set the manual lock function to unset the auto lock function
to lock the door only when it's necessary.

Attention

1. If no button is pressed within 7 seconds after push up the [Keypad cover],
entering mode will end with error sound.

2. When [Keypad lamp] is o, press [



] button and enter password.

Then, the door will be opened with melody.

Product Composition

Registering and changing the password

Name of parts (Front Ass'y)

Name of parts (Back Ass'y)

To open the battery cover

Locking the door from inside

315N 315D 315S

AA Battery 4pcs

Bolts for installation

Strike & Strike spacer

User Manual

Digital Keys

(315D model only)

Smart keys

(315S model only)

Emergency

power terminal

Smart key

touch point

(315S)

Front Ass'y

Opening the door from outside

▶Opening the door with password

▶Opening the door with

digital key (315D)

Push [Keypad cover] up. Push down the cover after pressing password and
the door will be opened with melody.

[Entering password]

Caution

Caution

Registering the digital key/smart key (for 2way only)

※When you register new digital key, smart key or register it again, you need to
register all digital key or smart key at a time.

Press [Register button] and [0] button for 5 seconds and all registered
digital keys or smart keys will be deleted.

2. Open [Keypad cover] of Front Ass'y
and press password (4 ~ 12 digit) except
[



] and [ # ] buttons.

1. Open [Battery cover] of the Back
Ass'y and press [Register button]
once briey.

5. Password registration is nished
if you press [Registraion button].

3. Press [



] to save. 4. To register another password,

repeat No. 2 & 3.

1. Open [Battery cover]
and press [Register button]
briey.

2. Place the digital key or
smart key on the touch
point of the front ass'y.

(Whenever you contact it,
registration is done with
beep sound).

3. Press [Register button]
to complete registration.

(Up to 3 passwords can be registered)

The door must be open while registering the password.
Default password is 1,2,3,4.

▶Deleting digital key or smart key

1. In case of registering more than 1 password, all process should be done
at a time. (Existing passwords will be deleted when registering new password)

2. When all three passwords are registered, Registration mode will be
automatically end.

3. If no password is entered within 7 seconds while registering password,
registration will be cancelled.

Register

button

Default setting is auto lock so the door
will be locked automatically in 3 seconds
after it's closed.

Locking the door from outside

Push the [Keypad cover] up and press [] button to lock the door.

▶When manual lock is set

▶When auto lock is set

Opening the door from inside

Press [Open / Lock] button of the Back Ass'y or turn the manual lock knob to
[Open] position to open the door.

Back Ass'y

Digital key
touch plate
(315D)

Keypad cover

Keypad

Auto Lock Latch

Mounting Plate

1. Place the registered digital key
to [Digital key touch plate].

2. After beep sound, the door will be
opened.

1. Place the registered smart key
to [Smart key touch point].

2. After beep sound, the door will be
opened.

▶Opening the door with
smart key (315S)

Installation Template

As this is a keyless digital door lock, damage may occur
to parts of the dead lock system if it is not used according
to the manual. Users should be fully aware of the manual
and how to operate this product.

CAUTION

315 Series User Manual

Warning

Safety precautions

The precautionary measures are for the safety of the user, for the prevention
of property damage, and for the avoidance of any inconveniences due to
an accident. These must be read and followed properly.

•

Do not disassemble or alter the lock.

UNICOR HIGHTECH CO., LTD

- This manual may change without notice in case of product improvement.

- Product specifications are subject to change without prior notice.

- This manual should not be edited or changed without manufacturer's permission.

•

Do not install where the distance over 5mm
between the door and door frame.

•

Please do not expose the password and change the
password in regularly.

•

Please do not mix old with new batteries or use
dierent types. Always use new alkaline batteries.

•

Do not clean the product with ammable materials
such as alcohol, benzene or thinners. Such
materials may damage the surface or cause a re.

•

Replace the current batteries with new ones within
1 week after the battery replacement notication
melody sounded o for the rst time.

•

Do not press using sharp tools or press numeric
button excessively.

•

Make sure the door is completely locked when
going out.

•

Batteries should not be exposed directly to heat
sources or ames, or submerged in water, because
they may leak or explode, resulting in severe
damage. Please do not use damaged batteries.

•

Place the batteries carefully and correctly
according to their polarity (+/-). If the batteries
are inserted in a wrong way, dierently from the
indicated direction or polarity, leakage or rupture
could occur. Pay attention to it.

Installation Template

Folding line
for standard
f ire-proof door

Folding line
for one-side
open or
both-side
open door

32mm diameter hole32mm diameter hole

Installation

Size

Fire proof door

Front Ass'y
(Front body)

Back Ass'y
(Main body)

Password

Smart key

Door thickness 40 ~ 50mm

68(W) x 173(H) x 24(D) mm

94(W) x 160(H) x 40(D) mm

4 ~ 12 digit (up to 3 password can be registered)

Digital key

Up to 100 keys can be registered (315D)

Up to 100 keys can be registered (315S)

Classcation Specication

Specication of product

Open type

* Lifetime of the batteries is based on the result of the tests by the company and is not an
absolute measurement. It will vary depending on the temperature and humidity of the
installed location as well as the frequency of usage and the quality of batteries.
* Function, design and composition of the product may change without any prior notice
for the purpose of improving the quality.

Double Locking mode

When all family members are in home, this
safe mode allows no one can open the door
using password or digital key or smart key
from outside.

Press [Open/Lock] button of the Back Ass'y
for more than 3 seconds and double locking
is activated.
When setup is done, you will hear beep sound.

Press [Open/Lock] button of the back ass'y or
open the door with [Manual lock knob] and
double locking mode is deactivated.

Double Locking mode

※ When double locking is set, the door will not be opened by password or
digital key or smartkey from outside.

▶

Unsetting

▶

Setting

Battery replacement notication

When batteries are completely discharged making it impossible to open the door,
this function allows the user can open the door using 9V battery from outside.

Contact DC 9V battery to external power supply
terminal and open the door using registered
password or digital key or smart key.

When it's time to replace batteries, you will hear melody sound to let you
know when open or lock the door.

When you hear this melody, open battery cover and replace all batteries with

1.5V Alkaline batteries.

Attention

●

Must use general batteries, not rechargable ones.

●

Please be careful of batteries' polarity because it can cause leakage or

rupture if placed wrongly.

●

Must replace all old batteries with new ones, not partially. Do not use new ones

with discharged ones together.

●

It is designed to operate with the rated voltage 6V. If low voltage(4.2V ±0.3V) is

detected, melody will be generated.

●

If the door lock stops working or batteries are discharged in a short period of
time after replacement, the batteries could be defective. It is required to
contact the shop where the user purchased batteries and get new ones as
replacement.

Emergency Power Supply

●

You can use 9V battery regardless of battery polarity.

●

Please remain contact of 9V battery onto the power supply terminal so that

emergency power is supplied (not rechargable).

●

Replace all discharged batteries with new ones right after emergency

power is supplied.

Caution

High-temperature warning system

▶Releasing high-temperature warning sound

When high temperature over 70℃ ±10℃ is detected, it generates warning
sound over 80dB.

If incorrect password or digital key or smart key is entered 3 times consecutively,
warning sound is generated and all functions are disabled for 30 seconds.

If the deadbolt is not working properly 3 times
when open or lock the door, it generates
melody as a warning signal.

Warning sound is disabled when registered password or
digital key or smart key is entered or batteries are removed.

Trespass / Breakage alarm

30 seconds LOCK function

Notication function of the deadbolt jam

It is released when the power is reset by
removing batteries.
※It is not released when the temperature
of the product is high.

If there's any attempt to open the door by abnormal way
such as widening the door gap, it generates 80dB warning
sound with blink.

▶Releasing warning sound

▶Operation

If you keep experience warning sound or malfunction of the lock,
you need to adjust the position of the lock again.

Attention

Attention

When warning sound is generated, the door opens automatically
regardless of Double locking or Forced lock setting.

Warning sound disabled

- [7] button : If pressed repeatedly, volume will be reduced gradually.

- [8] button : Silence (except warning sound)

- [9] button : If pressed repeatedly, volume will be increased gradually.

(Default setting is stage 4 of basic setting. )

Volume Control

The user can set the volume from silence to stage 6.

▶Setting

[Register button] - [ # ] -

- [Register button]

[ 7 ] : Volume down

[ 8 ] : Silence

[ 9 ] : Volume up

Push up [Keypad cover] and press [#] button for 1 time.
Enter registered password and press [] button.

Etiquette mode

Regardless of the current sound setting, this function makes
the door lock silent for 1 time when the user wants to use
it quietly.

※ This is one-time function so sound will be generated
from next time.

This function is for apartments and other buildings with multiple households.
It may be deleted upon moving in.

Master password registration & deletion

(Password / Digital key / Smart key)

[Register button]- [8] - [3] - [Register button] - [4 ~ 12 digit numer] - [Register button]

Registration

Registration

Deletion

Deletion

[Register button] - [#] - [#] - [#] - [7] - [3] - [Register button] - [ ]

- [Register button]

▶

Master password

▶

Key

registered password or
master password

[Register button]- [8] - [6] - [Register button] - [key contact] - [Register button]

[Register button] - [#] - [#] - [#] - [7] - [6] - [Register button] - [ ]

- [Register button]

registered password or
master password

Press [0] button after push up
[Keypad cover] from outside and
press [

] button for 5 seconds.

If the user opens the door using registered password, digital key or smart key from
outside, the setting is released automatically.

Forced lock setting/unsetting from outside

This function helps strengthen the level of security by generating poweful
warning sound if someone tries to unlock the door from inside when the user
leaves home for long period of time.

▶Unsetting

▶Setting

[Register button] [Register button]

[Register button] [Register button]

Intrusion alert (Human hands detection system)

This function prevents intrusion by drilling a hole on the door or pressing the
door open button with stick or metal wire and it makes the door open only by
human hands.

▶Setting

▶

Unsetting

If the password is '1234', enter fake password(random numbers) before real
password, enter '1234' and the door will be opened.

※

Fake numbers(random numbers) + real password should not exceed 20 digit.

After entering fake numbers

(random numbers)

press '1234'

Entering trick numbers to prevent exposure password

If there's watchful person when the user enter password, this function allows
the user can protect password by entering fake password before real password.

▶How to use

※ If the door is opened by [Open/Lock] button or manual lock knob from

inside, double locking mode is released automatically.

Double Locking unsetting from outside

This function allows the user can unset double locking mode from outside
in case of setting double locking mode by mistake.

▶Unsetting

1. While the door is locked, Push the [keypad cover] up and enter the
registered password.

2. Press the [#] button and press the password and press the [

] button again.

Warranty

◎

The warranty period for all of the company’s products is 1 year from the date of
purchase indicated on the warranty certicate.

◎

Even during the warranty coverage, users need to pay (the cost for trip, technical
support and parts) for some services if they are in the category of chargeable services.

◎

User generally submit the warranty certicate or other methods that contains the
installation information when needed to request a service.

◎

If the warranty certicate is not available, users need to submit a receipt, a credit card
receipt or a cash receipt instead (Except for a simple receipt)

◎◎

If it is impossible to show the purchase date, the warranty period will be applied by
taking into consideration the product’s manufactured date + expiration period
(6 months)

*

Details of mistakes and mishandling by the user

For products pruchased outside of Korea, please consult your local distiriboutor or
reseller as warranty policies vary from country to country.

Types of consumer damage

Content of compensation

Within the warranty period

After the warranty period

The product

is used in

normal

conditions

Failure occurs within 1 month from date of purchase

Failure occurs within 1 year from date of purchase

Same failure occurs 4 times or more

The repair parts are not available at the main oce

Product replacement

Free-of-charge repair

Free-of-charge repair

Product replacement

Paid repair

Replacement after depreciation
based on a xed rate.

Mistakes and

mishandling

by the user

Not the case of failure

Mistakes and mishandling by the user

Defective installation, and other reasons

Paid repair

Not the case of failure

Mistakes and mishandling by the user

Other reasons

When needed to break the
product due to the loss of
secret code.
When the door is sagging, or
installation is defective, requiring
the product to be reinstalled.
Request for checking the product
for possible problems while
there is no specic symptom of
a failure.
Problems in operation occur after
the user installs the product
directly.

A visit for repair is needed as
there are mistakes and mishan
dling by the user such as mistakes
in replacing batteries and unskill
ful use of the product.

Defective operation due to poorly
inserted batteries and use of
defective batteries.
Failure and breaking due to the
use of the product for other
purposes.
Failure and breaking caused by
the user on purpose or from an
external impact.

Failure and damage due to natu­ral disasters such as res, oods,
and damage from sea water.

Penetration by water, condensa­tion and injection of chemicals,
requiring the internal circuits to
be replaced, and causing failures.

UNICOR HIGHTECH CO., LTD

62 EunCheong Street, Namdong-Gu,
Incheon, Korea (zip. 21643)

Warning sound disabled
if batteries are removed.