Intel® Core™ i7/ i5/ i3 (Broadwell-U) Slim Embedded System
High Performance, Rugged, Extended Temp, Power Protection
USER
USER
Manual
Manual
1.0.0 Edition 20151016
Record of Revision
VersionDatePageDescriptionRemark
0.1009/25/2015AllPreliminary Release
1.0010/16/2015Ofcial Release
ii
Declaimer
This manual is released by 8QLFRPS/DEV. for reference purpose only. All
product offerings and specications are subject to change without prior notice. It
does not represent commitment of 8QLFRPS/DEV. 8QLFRPS shall not be liable for
direct, indirect, special, incidental, or consequential damages arising out of the
use of the product or documentation, nor for any infringements upon the rights
of third parties, which may result from such use.
Declaration of Conformity
FCC
CE
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The product (s) described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to
remain CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.
Copyright and Trademarks
This document contains proprietary information protected by copyright. No part
of this publication may be reproduced in any form or by any means, electric,
photocopying, recording or otherwise, without prior written authorization
by 8QLFRPS/DEV,QF. The rights of all the brand names, product names and
trademarks belong to their respective owners.
iii
Order Information
Part NumberDescription
EFKR-40)
PoER
Echo-40F-
PoER350U
Echo-40F-
PoE650U
Echo-40F-
PoE350U
Echo-40F-
2G650U
Echo-40F-
2G350U
Echo-40F-
2R650U
Echo-40F-
2R350U
Echo-40F- Slim Embedded System, Intel® Core™ i7-5650U
Processor (Broadwell-U), 6 GbE LAN with 4 PoE+, 2 Front-access
SSD Tray, 4 COM, 6 USB, Isolated DIO
Echo-40F- Slim Embedded System, Intel
Processor (Broadwell-U), 6 GbE LAN with 4 PoE
®
Core™ i5-5350U
+
, 2 Front-access
SSD Tray, 4 COM, 6 USB, Isolated DIO
Echo-40F- Slim Embedded System, Intel
®
Core™ i7-5650U
Processor (Broadwell-U), 6 GbE LAN with 4 PoE+, 4 COM, 6 USB,
Isolated DIO
Echo-40F- Slim Embedded System, Intel
®
Core™ i5-5350U
Processor (Broadwell-U), 6 GbE LAN with 4 PoE+, 4 COM, 6 USB,
Isolated DIO
DDR3L4GW DDR3L 4GB 1333/1066 MHz RAM, Wide Temperature
-40°C to +85°C
DDR3L8G
DDR3L4G
PWA-120W120W, 24V, 90VAC to 264VAC Power Adapter with 3-pin
PWA-120WM4P120W, 24V, 90VAC to 264VAC Power Adaptor with 4-pin
PWA-160W-WT160W, 24V, 85VAC to 264VAC Power Adaptor with 3-pin
3G Module
4G Module
WiFi Module
WiFi & Bluetooth
Module
VESA Mount
DIN-RAIL
TMBK-20P-100
Certied DDR3L-1600 8G RAM
Certied DDR3L-1600 4G RAM
Terminal Block
Mini-DIN Connector
Terminal Block, Wide Temperature -30°C to +70°C
Mini PCIe 3G/GPS Module with Antenna
Mini PCIe 4G/GPS Module with Antenna
Mini PCIe WiFi Module with Antenna
®
Intel
Mini PCIe WiFi & Bluetooth Module with Antenna
VESA Mounting Kit
DIN Rail Kit
Terminal Block 20-pin to SCSI Cable, 100cm
TMBK-20P-500
TMB-SCSI-20PTerminal Board with One 20-pin SCSI Connector and
Terminal Block 20-pin to SCSI Cable, 500cm
DIN-Rail Mounting
v
Table of Contents
CHAPTER 1 GENERAL INTRODUCTION 1
1.1 Overview 1
1.2 Features 1
1.3 Product Specication 2
1.3.1 Specications of Echo-40F-PoER
1.3.2 Specications of Echo-40F-PoE
1.3.3 Specications of Echo-40F-2G
1.3.4 Specications of Echo-40F-2R
1.4 Supported CPU List 10
1.5 Mechanical Dimensions 11
1.5.1 Dimensions of Echo-40F-PoER
1.5.2 Dimensions of Echo-40F-PoE
1.5.1 Dimensions of Echo-40F-2G
1.5.2 Dimensions of Echo-40F-2R
CHAPTER 2 GETTING TO KNOW YOUR Echo-40F 13
2.1 Packing List 13
2.2 Front Panel I/O Functions 13
2.3 Rear Panel I/O and Functions 19
2.4 Main Board Expansion Connectors 24
2.5 Main Board Jumper Settings 35
2.6 Ignition Control 39
CHAPTER 3 SYSTEM SETUP 42
3.1 How to Open Your Echo-40F 42
3.1.1 Echo-40F-PoE/ Echo-40F-2G 42
3.1.2 Echo-40F-PoER/ Echo-40F-2R 44
3.2 Installing DDR3L SO-DIMM Modules 46
vi
3.3 Installing Mini PCIe Cards 47
3.4 Installing Antenna Cable 48
3.5 Installing CFast Card and SIM Card 50
3.6 Installing SSD/HDD 52
3.6.1 Echo-40F-PoE/ Echo-40F-2G 52
3.6.2 Echo-40F-PoER/ Echo-40F-2R 55
3.7 Mounting Echo-40F 57
CHAPTER 4 BIOS AND DRIVER SETTING 58
4.1 BIOS Settings 58
4.2 Main Menu 59
4.3 Advanced Function 60
4.4 Chipset Function 68
4.5 Boot Function 69
APPENDIX A : ISOLATED DIO GUIDE 70
APPENDIX B : GPIO and WDT Functions 73
APPENDIX C : Power Consumption 74
vii
GENERAL INTRODUCTION
1
GENERAL INTRODUCTION
1.1 Overview
Echo-40F Series Slim Embedded System is a new generation compact
integrated embedded engine in the market. Powered by leading-edge
technology, 5th generation Intel
engine, dual DDR3L 1333/ 1600 MHz SO-DIMMs, up to 16GB memory.
Advanced Intel® HD Graphics 6000 supports DVI-D and dual DisplayPort
display interface, independent 4K displays with up to 20% enhanced graphics
performance than former generation.
®
Core™ i7/ i5/ i3 U-Series SoC (Broadwell-U)
Featured with 2 front-access 2.5" SSD/ HDD trays, 6 Gigabit LAN ports with
4 IEEE 802.3at PoE
Card/ mSATA, 2 External SIM Card sockets support 3G/ 4G/ LTE/ WiFi/ GPRS/
UMTS, 1 External CFast socket, 2 USB 3.0, 4 USB 2.0, 16 Isolated DIO, 6V to
36V wide range power input with up to 80V smart surge protection, 16-mode
congurable ignition power control, fanless design and -25°C to 70°C operating
temperature, just integrated in a 1.9"-height chassis, Echo-40F is ready to
customize for your requirements.
Echo-40F Series Slim Embedded System delivers outstanding
performance, compact integration, smart protection functions and trusted
rugged reliability for your machine vision, intelligent automation, Intelligent
Transportation System (ITS), in-vehicle information system, logistic system,
Industry 4.0 and any Internet of Thing (IoT) applications.
+
ports, 2 Mini PCIe sockets for PCIe/ USB/ External SIM
(According to the conguration you order, the Echo-40F
series may contain SSD/HDD and DDR3L SO-DIMM.
Please verify these items if necessary.)
2Accessory box, which contains
● Drivers & Utilities DVD
● Wall-mounting bracket
● KHS#6-32x6 screw for wall-mounting bracket
● M2.5x6 screw for Mini PCIe Slot
● 3-pin Pluggable terminal block
● 20-pin pluggable terminal block
● Foot Pad
● HDD Tray Key
1
1
2
4
4
2
1
4
2
2.2 Front Panel I/O Functions
In Echo-40F series family, all I/O connectors are located on front panel
and rear panel. Most of the general connections to computer device, such as
USB, DVI-D, DisplayPort and any additional storage, are placed on the front
panel.
It is a hardware reset switch. Use this switch to reset the system without power
off the Echo-40F. Press the Reset Switch for a few seconds, then reset will be
enabled.
2.2.2 Power Button
DP2LAN1 LAN2DVI-D
HDD
PWR
RESET
POWER
DP1
The Power Button is a non-latched switch with dual color LED indication. It
indicates power status: S0, S3 and S5. More detail LED indications are listed as
follows:
SIM 1SIM 2
CFast
USB 2.0USB 3.0
LED ColorPower StatusSystem Status
Solid BlueS0System working
Solid OrangeS3, S5
Suspend to RAM, System off with standby
power
To power on Echo-40F, press the power button and then the blue LED is
lightened.
To power off Echo-40F, you can either command shutdown by OS operation, or
just simply press the power button.
If system error, you can just press the power button for 4 seconds to shut down
the machine directly.
Please do note that a 4-second interval between each 2 power-on/ power-off
operation is necessary in normal working status. (For example, once turning
off the system, you have to wait for 4 seconds to initiate another power-on
operation).
14
GETTING TO KNOW YOUR Echo-40F
2.2.3 CFast Card
HDD
PWR
POWER
RESET
DP2LAN1 LAN2DVI-D
DP1
SIM 1SIM 2
CFast
USB 2.0USB 3.0
There is a CFast socket on the front panel supporting Type-I/ Type-II Compact
Flash card. It is implemented by a SATA II Port from Broadwell-U PCH.
Be sure to disconnect the power source and unscrew the CFast socket cover
before installing a CFast card. The Echo-40F does not support the CFast hot
swap and PnP (Plug and Play) functions.
It is necessary to remove power source first before inserting or removing the
CFast card.
Yellow-HDD LED: A hard disk/ CFast LED. If the LED is on, it indicates that the
system’s storage is functional. If it is off, it indicates that the system’s storage is
not functional. If it is ashing, it indicates data access activities.
Green-Power LED: If the LED is solid green, it indicates that the system is
powered on.
LED ColorPower StatusSystem Status
YellowHDD/ CFast
• On/ Off : Storage status, function or not.
• Twinkling : Data transferring.
GreenPowerSystem power status (on/ off)
2.2.5 DVI-D Connector
HDD
PWR
POWER
RESET
DP2LAN1 LAN2DVI-D
DP1
SIM 1SIM 2
CFast
USB 2.0USB 3.0
The DVI-D connector on the front panel supports DVI display modes. The DVI
output mode supports up to 1920 x 1080 resolutions.
2.2.6 DisplayPort
DP2LAN1 LAN2DVI-D
HDD
PWR
RESET
POWER
DP1
Onboard DisplayPort connection supports up to 3840 x 2160 resolutions at 60Hz.
DP1 only supports DisplayPort, it does not support HDMI and DVI function.
SIM 1SIM 2
CFast
USB 2.0USB 3.0
16
GETTING TO KNOW YOUR Echo-40F
2.2.7 External USB
HDD
PWR
RESET
POWER
DC-IN 6~36V
V+ V
IGN
On | Off
USB 2.0
DP2LAN1 LAN2DVI-D
DP1
DIO
Isolated
2011
101
D IPIN 1 ~ 8DOPIN 11 ~ 18
PoE+
3456
LAN4
LAN3
LAN6
LAN5
SIM 1SIM 2
CFast
COM1
COM3
USB 2.0USB 3.0
COM2
COM4
There are 2 USB 3.0 connections available supporting up to 5GB per second
data rate in the front side of Echo-40F. They also comply with the requirements
of SuperSpeed (SS), High Speed (HS), Full Speed (FS) and Low Speed (LS).
2.2.8 Mini PCIe & SIM Card Comparison Table
DP2LAN1 LAN2DVI-D
HDD
PWR
RESET
POWER
DP1
CN30 CN31
Note:
The SIM card sockets do not support hot-plug. Please make sure to unplug the
system power before inserting the SIM card(s).
There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side of Echo-40F. LAN 1 is powered by Intel® 218LM
Ethernet engine; LAN 2 is powered by Intel I210 Ethernet engine. When both
LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled.
Using suitable RJ-45 cable, you can connect Echo-40F system to a computer,
or to any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pinouts of LAN 1 and LAN 2 are listed as follows:
Pin No.10/ 100Mbps1000Mbps
1E_TX+MDI0_P
2E_TX-MDI0_N
3E_RX+MDI1_P
4----MDI2_P
5-----MDI2_N
6E_RX-MDI1_N
7-----MDI3_P
8------MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/ off
when Ethernet data packets are being transmitted/ received.
LED10Mbps100Mbps1000Mbps
Right
Bottom Led
Off
Solid
Green
Orange
Solid
18
Left
Bottom Led
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
18
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.