UNICOM Electric VAA-FMT1-TR User Manual
SPECIFICATIONS
Interface Transmitter: 1 x BNC (Female) / Input Signal
1 x ST for single / Output Signal
Receiver: 1 x BNC (Female) / Output Signal
1 x ST for single / Input Signal
Bandwidth: DC to 12 MHz
Impedance: 75 Ohm.
Input Signal Range: 1V<V
Signal-to-Noise Ratio:
Output Signal Range: 480mV<V
System Bandwidth: 8MHz
Transmission Loss: Max. 13dB
Power Supply: DC 9V 1Amp
Distance: Maximum length 2.5km
Cable Type: 62.5/125um Multi-Mode fiber cable
Wave Length: 850nm
Enclosure: Aluminum Case
Dimensions: 2.2” (W) x 4.15” (L) x 0.8” (H)
≥
60dB
p-p
<2.4V
p-p
<1.1V
Coaxial/Fiber Optic
Video Converter
Installation Guide
ORDERING INFORMATION
VAA-FMT1-TR Video/Fiber Optic Converter, ST/Multi-
VAA-FMT1-T Video/Fiber Optic Converter, ST/Multi-
VAA-FMT1-R Video/Fiber Optic Converter, ST/Multi-
©UNICOM 2003. UNICOM is a trademark of UNICOM Electric, Inc. All rights reserved.
Specifications subject to change without notice.
Mode, Kit with Transmitter and Receiver
Mode, Transmitter
Mode, Receiver
VAA-FMT1-TR
City of Industry, CA 91748 U.S.A.
Phone: 626.964.7873 or 800.346.6668
e-mail: info@unicomlink.com
908 Canada Court
Fax: 626.964.7880
www.unicomlink.com
Coaxial/Fiber Optic Video Converter
UNICOM’s Video/Fiber converters are designed to convert
baseband video signal to Multi-Mode fiber optic. This converter
comes as a set with Transmitter and Receiver and must be used in
pairs. They easily extend your video signal up to 2,500 meters.
Linear modulation and wideband low noise circuit design assures
transmission quality to meet NTSC, PAL, SECAM and D2MAC
specification. To get maximum extension, just install new or use
your existing fiber optic cable for your next video extension.
Receiver
Transmitter
APPLICATION DIAGRAM
CCD/Camera
BNC
Coaxial
Cable
Transmitter Receiver
VIDEO/AUDIO
(Transceiver)
ADAPTER
Input
Output
Input
ADAPTER
VIDEO/AUDIO
62.5/125µm
Multi-Mode fiber
cable up to 2.5km
(Receiver)
Video Monitor
Output
BNC
Coaxial
Cable
Loading...