UNICOM Electric GST-1602G User Manual

16 Port 10/100/1000Base-T Gigabit Ethernet

Switch with two SFP (mini) GBIC Slots

DynaGST/1602G

USER’S MANUAL

PN: GEP-33216T

Content

1. Introduction .............................................................. 1

Features ..................................................................... 2

Package Contents...................................................... 3

2. Hardware Description.............................................. 4

Front Panel................................................................. 4

Rear Panel .................................................................5

LED Indicators............................................................ 5

3. Installation ................................................................ 8

4. Network Application ................................................ 9

5. Troubleshooting..................................................... 10

6. Technical Specification......................................... 12

1. Introduction

Gigabit Ethernet over copper technology is a proven cost-effective way for

network equipment to be upgraded from Fast Ethernet to Gigabit speeds.

The need of expensive fiber optic cabling for Gigabit speeds is eliminated by

using standard 4-pair Category 5e copper cabling. This technology creates

high-speed backbone connections between switches, servers, databases,

and workstations.

The DynaGST/1602G Gigabit Ethernet switch is an ideal solution for solving

traffic congestion at the core of the network. It offers auto-negotiation

10/100/1000Base-T Gigabit Ethernet ports that can significantly improve

your network backbone performance. It will also fit into any enterprise level

network as an exit to the backbone switch. The DynaGST/1602G provides

two mini GBIC Gigabit slots for Gigabit speed network connection.

The DynaGST/1602G Gigabit Ethernet switch features Auto MDI/MDIX

function for each port and features a store-and-forward switching. It auto-

learns and stores source address on a 4K MAC address table.

1

Features

 Compatible with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX,

IEEE802.3z Gigabit fiber and IEEE802.3ab 1000Base-T

 16 Port Gigabit switch with two Mini SFP GBIC ports

 Automatic MDIX for all ports

 4K entry MAC address table

 2Mbit Memory buffer

 IEEE802.3x flow control:

 Pause frame for 10/100/1000Mbps full duplex

 Backpressure for 10/100 Mbps half duplex

 Two Mini SFP GBIC socket for Mini GBIC transceiver

 Store-and-Forward architecture support

 One DC fan provides proper ventilation and increases system heat sink

performance

 19" Rack mount design

2

Package Contents

 DynaGST/1602G Gigabit Ethernet switch

 Power Cord

 Four Rubber Feet

 User Manual

DynaGST/1602G Gigabit Ethernet switch Power Cord

User Guide Rubber Feet

Figure 1-1. Package Contents

Compare the contents of your DynaGST/1602G Gigabit Ethernet switch

package with the standard checklist above. If any item is missing or

damaged, please contact your local dealer for service.

3