UNICOM Electric FEP-31016T-1, FEP-31024T-1 User Manual

908 Canada Court

City of Industry, CA 91748 U.S.A.

Phone: [phone] or 800.346.6668 Fax: [phone]

www.unicomlink.com e-mail: [e-mail]

©UNICOM 2001. UNICOM and “A Network Systems Solution” are trademarks of UNICOM Electric, Inc.
All rights reserved. Specifications subject to change without notice.
Rev: 12.02

16 Port or 24 Port

10/100Base-TX Switch

Dyna-Switch/16
Dyna-Switch/24

USER’S MANUAL

FEP-31016T-1
FEP-31024T-1

Package Contents

Package includes the following:

18

Necessary Cables: UTP (Unshielded Twisted Pair) Cable
LED Indicators: Per Device: Power

Per Port: LINK/ACT, FDX/COL

Performance Specifications

Transmission Method: Store and forward
MAC address table: 8K-entry MAC address table
Maximum Forwarding Rate: 14,880 pps /10Base-T

(64byte packets) 148,800 pps /100Base-TX
Maximum Filtering Rate: 14,880 pps /10Base-T

(64byte packets) 148,800 pps/100Base-TX
Flow control: Back-pressure (half-duplex)

Pause frame (full-duplex)

Duplex mode: Supports both Half-duplex and

Full-duplex mode

Physical & Environmental Specification

Power Supply: 100-240V AC, 50-60Hz

Internal universal power supply

Dimensions: 440mm x 161mm x 44mm (LxWxH)

17.6” x 6.44” x 1.76” (LxWxH)
Operating temperature: 0˚C to 45˚C (32˚F to 113˚F)
Storage temperature: -40˚C to 70˚C ( -40˚F to 158˚F)
Humidity: 10% to 90% (non-conditioning)
EMI: FCC Class A, CE mark
Safety: UL, cUL

FCC Statement

This equipment has been tested and found to comply with the limits for a class B device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful inter ference in a commercial installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference with radio communications.
Operation of this equipment in a residential area is likely to cause harmful inter ference, in
which case, the user will be required to correct the inter ference at the user’s expense.

■ Dyna-Switch/16 or 24

■ Rack-mounting brackets

■ AC power cord

■ Four (4) adhesive-backed rubber feet

■ User’s manual

■ Warranty card

Dyna-Switch/16 or 24 AC power cord rubber feet User’s Guide

Rack-mounting Brackets Figure 1. Contents of package.

IMPORTANT: If any piece is missing or damaged, please contact your
local dealer or reseller for service.

For Your Records

Product Name:

Serial Number:

Date of Purchase:

Purchased from:

Notes: