Uniclass UKV-048OSD, UKV-088OSD, UKV-0168OSD User Manual
UKV-048OSD/088OSD/0168OSD
4-/8-/16-PORT
RACKMOUNT
KEYBOARD-VIDEO-MOUSE
SWITCH
W/ OSD, FRONT-PANEL BUTTONS & KB HOTKEY CONTROL
CASCADABLE
PS/2 TYPE
19” RACK-MOUNT
User Guide
Rev. 1.8
Aug 26, 2003
Copyright and trademarks
Copyright © 2003 All rights reserved
All trademarks in this manual are the property of their respective trademark owners.
Disclaimer
This User Guide fully explains the installation and use of UKV-048OSD/088OSD/0168OSD Rackmount
KVM Switch. Since every precaution has been taken to prepare and write this manual, we assumes no
responsibility for errors or omissions contained therein, nor any liability for damages resulting from the use of
the information in it. Specifications and functions may be changed without prior notice
Icon convention used in this User Guide
This brightened light bulb indicates some useful hints you should know before proceed with following
instructions.
This lightning bolt indicates warnings you should take special precautions against.
TABLE OF CONTENTS
TABLE OF CONTENTS ..................................................................................................................4
LIST OF FIGURES...........................................................................................................................6
LIST OF TABLES.............................................................................................................................6
1. FEATURES AND FUNCTIONS..................................................................................................7
1.1. FEATURES ..................................................................................................................................8
General features...........................................................................................................................8
Connector Interface .....................................................................................................................8
LED display for status monitoring...............................................................................................8
Control features ...........................................................................................................................8
Security.........................................................................................................................................8
Cascaded Application..................................................................................................................8
Hardware/Software Support........................................................................................................9
Power interface............................................................................................................................9
Cabling requirements...................................................................................................................9
1.2. PACKAGE CONTENTS .................................................................................................................9
1.3. EXTERNAL VIEWS....................................................................................................................10
1.3.1. Front View .......................................................................................................................10
1.3.1.1. Front-panel Buttons...................................................................................................10
1.3.1.2. Numerical LED Displays and Indicators..................................................................10
1.3.2. Rear View.........................................................................................................................11
1.3.2.1. Power Jack ................................................................................................................11
1.3.2.2. Console Port..............................................................................................................11
1.3.2.3. PC Port......................................................................................................................12
1.3.2.4. Daisy Chain Port.......................................................................................................12
1.4. KVM SWITCH TECHNOLOGY OVERVIEW ................................................................................12
2. INSTALLATION.........................................................................................................................13
2.1. CHECKLIST BEFORE INSTALLATION..........................................................................................13
2.2. MOUNTING THE KVM SWITCH................................................................................................14
2.3. CONNECT YOUR PCS AND PERIPHERALS TO SINGLE KVM SWITCH ........................................14
2.4. CONNECT YOUR PCS AND PERIPHERALS TO MULTIPLE DAISY-CHAINED KVM SWITCHES .....15
2.5. INITIALIZE YOUR KVM SWITCH ..............................................................................................17
2.5.1. Reset without disconnecting or powering down your computers ....................................17
3. OPERATION ...............................................................................................................................18
3.1. CONTROL INTERFACES.............................................................................................................18
3.1.1. Front-panel Buttons.........................................................................................................18
3.1.2. Keyboard Hotkeys............................................................................................................18
3.1.3. On Screen Display ...........................................................................................................20
3.1.4. OSD Navigation...............................................................................................................21
3.1.5. OSD Option Selection......................................................................................................21
3.1.6. Edit the OSD Option Parameter......................................................................................21
3.2. OPERATE THE SWITCH .............................................................................................................22
<Select PC>...............................................................................................................................22
<Next lower channel>...............................................................................................................23
<Next Higher Channel>............................................................................................................23
Table of Contents
<Next Lower Bank> (when daisy-chained)..............................................................................23
<Next Higher Bank> (when daisy-chained)..............................................................................24
<Autoscan Beep Sound On/Off>...............................................................................................24
<Reflash EEPROM>.................................................................................................................24
<Find PC by Name> .................................................................................................................25
<Change PC Name> .................................................................................................................26
<Reset KVM>............................................................................................................................26
<Show OSD Menu>...................................................................................................................26
<Autoscan> ...............................................................................................................................26
<Autoscan Delay Time>............................................................................................................27
<OSD Remain Time>................................................................................................................27
<Password Configuration>.......................................................................................................27
<Password Change>.................................................................................................................28
APPENDIX A TECHNICAL SPECIFICATIONS.......................................................................29
APPENDIX B SYSTEM & CABLE REQUIREMENTS.............................................................31
APPENDIX C TROUBLESHOOTING.........................................................................................32
Table of Contents
LIST OF FIGURES
Figure 1-1a UKV-048OSD .........................................................................................................9
Figure 1-1b UKV-088OSD .........................................................................................................9
Figure 1-1c UKV-0168OSD .....................................................................................................10
Figure 1-2a UKV-048OSD Front Panel....................................................................................10
Figure 1-2b UKV-088OSD Front Panel....................................................................................10
Figure 1-2c UKV-0168OSD Front Panel..................................................................................10
Figure 1-3a UKV-048OSD Rear Panel.....................................................................................11
Figure 1-3b UKV-088OSD Rear Panel.....................................................................................11
Figure 1-3c UKV-0168OSD Rear Panel ...................................................................................11
Figure 2-1 The 3-1 combo KVM cable is highly recommended................................................13
Figure 2-2 Daisy-chaining multiple KVM switches in a cascaded application ........................15
Figure 3-1 OSD Main Menu.....................................................................................................20
Figure 3-2 Find PC by name searching.....................................................................................25
Figure 3-3 Bank number, Port Number and PC Name as shown on the OSD..........................25
LIST OF TABLES
Table 3-1 Summary for Hotkey Sequences ...............................................................................19
Table B-1 Necessary accessories for the KVM Switches..........................................................31
Table B-2 The Standard 3-in-1 Keyboard-Video-Mouse Combo Cable...................................31
List of Figures &Tables
UKV-048OSD/088OSD/0168OSD Rackmount KVM Switch User Manual Rev. 1.8 July 2004
1. FEATURES AND FUNCTIONS
The UKV-048OSD/UKV-088OSD/UKV-0168OSD KVM Switch is a 4-/8-/16-port
cascadable PS/2 type KVM Switch with OSD control. It enables the network
administrator to access, control, boot and reboot multiple connected computers
using only one keyboard, video and mouse.
Remote computer/server management from one keyboard, mouse and video
The UKV-048OSD/UKV-088OSD/UKV-0168OSD KVM Switch is a quality product
designed for secure remote computer/server management on a centralized single
admin desk in corporate, factory as well as in campus computing environment. It
features a console port to connect your shared keyboard, video and mouse, and
4/8/16 PC ports to connect to your computers/servers. You can simply place it on
desktop or mount it on a standard 19” rack for more secured and centralized
management. This KVM Switch features a metal enclosure for better shielding
against electromagnetic interference commonly seen in lab or factory floor
environment.
Easy Operation by front-panel buttons, keyboard hotkeys and OSD Menu
controls
The KVM Switch can be easily operated using front-panel buttons, keyboard
hotkeys, as well as OSD Menu control. These available control interfaces yield
more convenient and more effective operation over your daily network managing
routines and hence more productivity for network administrator.
Flexible port capacity through multiple daisy-chained KVM switches
In addition to the choice over the 4/8/16-port capacity of each individual unit, users
can also take advantage of its cascadable function to daisy-chain up to 16 units of
the KVM Switches together. For example, with 16 units of the UKV-0168OSD KVM
Switches cascaded together, the total port capacity could easily be scaled up to 256
computers. You can also vary port capacity by daisy-chaining multiple units in
different combination according to your real needs.
Saving Time, Space and Money with more productivity
The KVM switches offer special advantages saving time, space and money plus a
significant boost over productivity of the network administrative staff. With our KVM
Switches, you eliminate the need for a separate set of peripherals for each of your
computers. With the number of servers running higher than ever in the corporate
milieu, this will amount to a huge saving on money. The KVM users will also
appreciate the neat space on desktop or working bench that is free from multiple
keyboards, videos and mice. On the other hand, the net admin can save lots of
time not to shift around separate sets of keyboard and mouse, just to keep up with
the network management routines. Hence, the KVM Switch could be a tremendous
help in facilitating a better and more efficient work environment for network
administration, and an indispensable productivity tool that will definitely favored by
the tech-savvy people.
Page 7
Chapter 1 Features and Functions
UKV-048OSD/088OSD/0168OSD Rackmount KVM Switch User Manual Rev. 1.8 July 2004
1.1. Features
General features
▪ 4-/8-/16-port cascadable PS/2 type electronic KVM switch with OSD Menu control
▪ Robust metal case design ensures best EMI shielding and super video quality
▪ Standard 19” rack mount size
▪ Cost-effective remote workstation/server management solution for corporate, factory
and campus computing environment
▪ Very high video resolution up to 1920 × 1440 with superb video transfer quality and low
distortion
▪ Buzzer sound for switching port confirmation while autoscanning
▪ User-specified parameters are saved within EEPROM memory, hence no need for
reconfiguration after switch system reboot.
Connector Interface
▪ PS/2 Keyboard and mouse connector interface
▪ 15-pin HDB video connector interface
LED display for status monitoring
▪ Dual 7-segment LED displays for switch bank number
▪ Front-panel port status LEDs for easy and instant port status monitoring
Control features
▪ Control multiple PCs from a single keyboard, monitor and mouse
▪ Front-panel buttons for direct channel selection
▪ Reset and Autoscan activated by front-panel key press and keyboard hotkey
▪ Keyboard hotkeys for quick operation commands
▪ OSD Menu options for more convenient and intuitive menu-driven control
▪ Channel selection by front-panel buttons, keyboard hotkeys and OSD Menu control
▪ Search the presence of a connected PC by its name
Security
▪ Password security prevents unauthorized intrusion.
▪ Provide 8-character password protection.
Cascaded Application
▪ Auto-detect daisy-chain configuration without setting any dipswitch
▪ Cascadable up to 16 units in daisy-chained configuration
▪ Port capacity easily scalable up to a maximum of 256 PCs using flexible combination of
different switch units
▪ Dual 7-segment LED displays to indicate the switch bank number.
Page 8
Chapter 1 Features and Functions
UKV-048OSD/088OSD/0168OSD Rackmount KVM Switch User Manual Rev. 1.8 July 2004
Hardware/Software Support
▪ Support a wide range of hardware in addition to the standard keyboard, video and mouse
▪ Support Microsoft IntelliMouse®, IntelliMouse Explorer®, Logitech NetMouse® and
other common wheel mouse
▪ Support a wide range of software platforms: DOS, Windows 3.x, Windows
95/98/SE/2000/ME/XP, Windows NT, Netware, OS2, Unix, Linux and BSD
▪ Hot-plugging of PCs for maintenance without powering down the KVM Switch or PC.
Power interface
▪ Powered by the external power adapter connected to the AC power outlet in addition to
the PS/2 keyboard/mouse interface power
Cabling requirements
▪ Compatible with standard individual keyboard, video, and mouse cable
▪ Highly recommended: the 3-in-1 combination KVM cable
1.2. Package Contents
The UKV-048OSD/UKV-088OSD/UKV-0168OSD KVM Switch Package should
contain the following items:
▪ The UKV-048OSD/UKV-088OSD/UKV-0168OSD KVM Switch
▪ Daisy Chain Cable (3-in-1 KVM combo cable)
▪ Power adapter cord (AC to DC)
▪ Rack Mount Kit
▪ This User Guide
▪ A Quick Installation Guide / Quick Reference Sheet
Figure 1-1a UKV-048OSD
Figure 1-1b UKV-088OSD
Page 9
Chapter 1 Features and Functions
UKV-048OSD/088OSD/0168OSD Rackmount KVM Switch User Manual Rev. 1.8 July 2004
Figure 1-1c UKV-0168OSD
1.3. External Views
The following sections will give detailed descriptions of the front-panel and rear
panel of the UKV-048OSD/UKV-088OSD/UKV-0168OSD KVM Switch.
1.3.1. Front View
Figure 1-2a UKV-048OSD Front Panel
Figure 1-2b UKV-088OSD Front Panel
Figure 1-2c UKV-0168OSD Front Panel
1.3.1.1. Front-panel Buttons
Use these front-panel buttons to directly select channels as well as to perform
specific function such as reset or autoscan.
1.3.1.2. Numerical LED Displays and Indicators
The Numerical LED display(s) and LED indicators on the front-panel show forth the
information of your current switch bank number and port status. The current active
switch bank will be shown on the Dual Numerical LED Displays while the Port
Page 10
Chapter 1 Features and Functions
Loading...