BS302
Bluetooth Speaker
User’s Manual
Please read before using the equipment
INTRODUCTION
This Bluetooth 2.1 Speaker System uses the latest Bluetooth technology that enables you to enjoy
music and enhances TV sound anywhere inside your house. You can simply pair the system to
Bluetooth Device such as iPhone, iPad, iPod Touch, Smartphone a nd Mobile, or even directly connect
the system to any audio source such as Panel TV, DVD, and Hi-Fi/CD/MP3…etc. Without complicated
wiring and installation with your Audio/Video equipments and rear channel amplifier, the system
enables you to enjoy thrilling, lifelike sound stereo in minutes.
FEATURES
z Bluetooth V2.1+EDR
z Work wirelessly in Bluetooth or Direct Line-In with Cable
z Bluetooth technology lets you roam freely throughout your house and garden
z No Limitations in Line of Sight
z Virtually interference free audio quality
z User-friendly Control Panel
z Can be operated by AC Power or DC Batteries
z Wall-Mountable
z Vertical and Horizontal Positioning
z Operating distance up to 10 Meters (open area)
z Dual Light Indication (BT – Blue, Direct Line-In – Green)
PACKAGE INCLUDES
1 x Speaker
1 x AC/DC 12V 1.0A Power Adaptor for Speaker
1 x 1.5M Long Audio Cable
COMPONENT IDENTIFICATION
SPEAKER RECEIVERS
1. Power/Input Indicator Bar
2. Speaker Grill
3. Volume Increase
4. Power On/Off
5. Bluetooth Pairing Button
6. Volume Decrease
7. Battery Compartment
8. Wall-mount
9. Battery Door
10. Battery Door Lock
11. DC In
12. 3.5mm Direct Audio-In
BLUETOOTH PAIRING
1. Remove the door of the battery compartment. Insert 6 pieces of ‘AA’ size ALKALINE batteries
into the battery compartment with correct polarity under the speakers, then replace the do or of
battery compartment, or connect the provided AC/DC 9V Adaptor to the DC input jack under the
speakers, then plug it to the wall AC outlet.
2. Turn on the speaker system by pressing the POWER button, Indicator Bar then glows in Blue.
3. When pairing the system to Bluetooth Source Device (e.g. Mobile Phone), press Pairing button
once, Indicator Bar then blinks in Blue. Select the system name “AU Bluetooth Speaker” that
shows on the pairing list. Default Pairing Code is “ 0000 “.
4. When the Speaker and Bluetooth Source Device are successfully paired up, the Indicator Bar
then glows steadily in Blue.
OPERA TION
1. Switch on the Speaker by Pressing the Power Button once, Indicator Bar then glows in Blue.
2. Switch on the Bluetooth Source Device (e.g. Mobile Phone) to which the Speaker is paired up.
Play Music from the Bluetooth Source Device, and adjust Master Volume to Middle.
3. Music should be heard from the Speaker, adjust the Volume from the Speaker to desired level
by pressing
4. If the Volume Intensity from the Speaker is too weak, adjust the Master Volume from the
Bluetooth Source Device accordingly.
and .
5. To switch off the Speaker, simply press the Power button once again.
DIRECT LINE-IN
1. This Speaker System, at the same time, can also work as a conventional Wired Stereo Speaker
with Direct Line-In to your Panel TV. or other Audio Devices. Simply by connecting the 3.5mm
Audio Cables from the rear of the Speaker System to your Music Source.
2. When the Circuit inside the Speaker detects the Signal from Direct Line-In, the Indicator Bar
then glows steadily in Green.
TROUBLE SHOOTING
No Sound
z Ensure the AC a daptor is fully inserted into the AC outlet and the p ower connection input on the
transmitter.
z Ensure the speaker system and Bluetooth device has been paired up.
z Ensure the speaker system is switched ON.
z Ensure the TV or audio component is ON.
z The connected audio / video equipment is not playing. Start playing the equipment.
z The volume of speaker system is too low, adjust the volume to an appropriate level.
Distorted
z Ensure the volume level of speaker is adjusted properly.
z The speaker system is too far away from the Bluetooth device, move them closer.
TECHNICAL SPECIFICATIONS
Transmission Mode : Bluetooth® V2.1 + EDR
Carrier Frequency : 2.402~2.480GHz
Operation Voltage :
Frequency Response : 40Hz – 12KHz
Distortion : 1.5%
S/N Ratio : 65dB
Channel Separation : 30dB
Operation Distance : Up to 10 meters (open area)
Output Power : 2 x 3W (RMS)
WARNING:
1. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire or the like.
2. This product shall not be exposed to drippi ng or splashing and that no objects filled with
liquids, such as vases, shall be placed on the product.
3. Where the mains plug is used as the disconnect device for the product, the disconnect
device shall remain readily operable.
Speaker, AC/DC 12V 1.0A Power Adaptor, or
6 X ‘AA’ size Alkaline Batteries (not included)
Loading...