UNIA TERIS XL H Series, TERIS XL H 4, 3, TERIS XXL H Series, TERIS XL H 5 Operating And Maintenance Manual
...
OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
PN-EN ISO 12100:2012
PN-EN-ISO 13857:2010
PN-ISO 3600:1998
PN-EN-ISO 4413:2011
PN-ISO 11684:1998
PN-EN 349+A1:2010
PN-EN ISO 11688-1:2010
PN-EN 14017+A2:2009
PN-EN ISO 4254-1:2016-02
PN-EN 13739-1:2012
Grudziądz, 05.12.2017
CE Declaration of Conformity
CE Declaration of Conformity
UNIA Sp. z o.o.
st. Szosa Torunska 32/38
86 – 300 Grudziadz, Poland
Herewith declare with full responsibility that our product:
TERIS XL H / TERIS XXL H
type / model : …………………………………….
manufacturing year : ……………………………..
serial no. : ………………………………………..
is in compliance with the Ordinance of the Minister of
Economy of October 21, 2008 (Journal of Laws No. 199, item
1228) and the EU Directive 2006/42/EC of May 17, 2006 and
the Ordinance of the Minister of Infrastructure of May 4, 2009 (
Journal of Laws No. 75/2009, item 639) and the following
standards:
cultivating roller
This CE Declaration of Conformity is no longer valid if the
machine has been modified or reconstructed without the
manufacturer’s consent.
- 3 -
OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
Type
Production year
Serial no.
This maintenance and operating manual is an integral part of the
regulation, repairs and renovations.
Before starting the machine please read the operating
machine.
UNIA Sp. z o.o.
st. Szosa Torunska 32/38
PL 86 – 300 Grudziadz
tel. + 48 56 451 05 00
fax. + 48 56 451 05 01
Service tel. + 48 56 451 05 26
uniamachines.com
TERIS XL H / TERIS XXL H
MAINTENANCE AND OPERATING
MANUAL
Machine identification data:
machine. It is important that the manual is always in the possession
of the machine user. Access to the manual should be provided to
machine operators and cooperating persons while operation,
manual and follow the recommendations and
instructions regarding safety and proper usage of the
- 5 -
OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
Table of contents
1. Precautions ........................................................................................................................ 5
1.1 Before you Begin to Use Your Machine ........................................................................... 5
1.2 Health and safety regulations.......................................................................................... 5
1.3 Servicing........................................................................................................................... 6
1.4 Transport on highways .................................................................................................... 7
1.5 Safety Symbols................................................................................................................. 7
1.6 Nameplate ....................................................................................................................... 9
2. Technical and Identification Data ........................................................................................ 9
2.1
TERIS XL specification .................................................................................................... 11
2.2
TERIS XXL specification .................................................................................................. 12
3. Operating Manual .............................................................................................................13
3.1
First Start ....................................................................................................................... 13
3.2
Preparation of the Machine .......................................................................................... 13
3.3
Mounting and Disconnection of machines .................................................................... 14
3.4
Transport ....................................................................................................................... 15
3.5
Adjusting the Machine .................................................................................................. 16
3.5.1
Hydraulic Unfolding/Folding of the Machine ................................................................ 16
3.5.2
Adjusting the Drag ......................................................................................................... 17
3.5.2.1
Hydraulic Adjustment .................................................................................................... 17
3.5.2.2
Screw Adjustment ......................................................................................................... 18
4. Operation .........................................................................................................................18
5. Servicing and Maintenance ................................................................................................20
5.1
General .......................................................................................................................... 20
5.2
Replacement of the Machine Components ................................................................... 20
5.3
Hydraulic System ........................................................................................................... 20
5.4
Lighting .......................................................................................................................... 20
5.5
Brakes ............................................................................................................................ 21
5.6
Bolt, screw and nut tightening torques (Nm) ................................................................ 22
5.7
Lubrication ..................................................................................................................... 22
5.8
Storage of the Machine ................................................................................................. 24
5.9
Disassembly and Disposal .............................................................................................. 24
5.10
Warranty Conditions and Warranty Services ................................................................ 24
- 4 -
OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
PREFACE:
When buying the machine, check completeness of its accessories that include the following
components:
• Operating Manual
• Warranty Card
1. Precautions
1.1 Before you Begin to Use Your Machine
• Read the instruction manual.
• Pay always special attention to the text and illustrations marked with this symbol!
• These machines are intended for agricultural use only. Any use outside of this purpose shall be
considered as not intended use and will result in the loss of warranty. Learn how to use your
machine correctly and carefully!
• The machine may be dangerous when operated by not authorized individual or when operated
carelessly.
1.2 Health and safety regulations
• Before each start, check whether the tractor and machine are safe for road traffic and
operation!
• The tractor working with the machine must be equipped with the weights on the front axis!
Balance of the tractor with the attached machine, its steerability and braking ability must
always be kept.
• When connecting and disconnecting the machine to/from the tractor, its lifting and lowering on
the hydraulic lift of the tractor, setting the machine in the transport and working positions and
on the headlands, ensure that no bystanders and in particular children are present in the
vicinity of the machine. Perform these operations slowly, without sudden jerks!
• Never stay between the tractor and the machine when the tractor’s engine is running!
• The machine may only be operated, maintained and repaired by the personnel who know its
construction and are aware of the existing hazards!
• There are some places where crushing or cutting may occur on the parts actuated by the forces
other than the human force (e.g. the hydraulic system). When connecting the hydraulic hoses
to the hydraulic system of the tractor, always ensure that the hydraulics is depressurized! Check
positions of the control levers of the tractor hydraulic system. Only actuate the hydraulically
operated attachments when there is nobody present within their range of operation! Check the
hydraulic hoses on regular basis and replace them with new items when damaged or worn!
- 5 -
OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
• When driving on highways with the machine attached, lock the operating lever against its
lowering!
• The attached warning and indicating signs contain information on safe work: they are
intended for your safety!
• Before you start work, learn thoroughly operation of all devices and actuators and functions
of the machine. It is too late for this after you start work!
• Avoid wearing any loose clothing, which could be caught by rotating components of the
machine.
• Always keep the machine clean in order to reduce the danger of fire!
• Always check the surroundings before you start operation. Make sure that you have
sufficient visibility!!
• Never back or reverse the tractor when the machine is lowered to the working position.
When reversing, pay attention to the components that protrude far away and do not use the
independent brakes of the tractor!
• Check air pressure in the wheels of the tractor and the machine regularly.
• Never transport people on the machine and load it with any additional weights when
operating the machine or transporting it!
• Check and attach the traffic equipment, such as lighting, warning devices and possible
protective devices.
• Observe the admissible axial loads, total weights and transport dimensions.
• Check tightness of screws and nuts on regular basis and tighten them if required.
• Always use appropriate tools and wear safety gloves when changing tools.
• The spare parts must be conforming to the revisions specified by the manufacturer. This may
only be provided by the genuine spare parts. Use typical protection devices and pins for
securing all bolts of the machines (tractor + machine). Never use any temporary means of
protection, such as screws, bars, and wires etc., which can cause damage to the machine or
tractor during transport and cause a safety hazard for other road users!
• Attach and disconnect the machine to/from the tractor after having parked the machine on a
flat and hardened surface and with the tractor engine stopped. Store the machines unfolded.
• Store the machine in the locations inaccessible for unauthorized people or animals when not
in use.
• Besides the above guidelines, follow the general safety rules.
1.3 Servicing
• Service the machine when it is lowered onto the ground! If the machine is coupled
with the tractor, engine of the tractor must be off and brakes on!
• Use only tools in good technical condition and genuine materials and spare parts for servicing.
• Always protect the machine with appropriate supports when performing any maintenance or
repair work on the machine lifted up.
- 6 -
UWAGA
SCHMIEREN
OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
1.4 Transport on highways
• Never exceed the speed limits allowed on highways and follow traffic regulations of
the respective country!
• Pay special attention when passing and overtaking other vehicles and on curves (the unit is
pivotally connected to the tractor)!
• The machine, as the part of the vehicle that protrudes outside the rear side outline of the
tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic.
• When transporting the machine on highways, always use warning lights, distinguishing plate
and side reflectors.
• Maximum width of the machine, which can be moved on highways is specified in the detailed
regulations of the country of use. They should be observed.
1.5 Safety Symbols
A
B
C
D
E
F
Read through the Operating Manual thoroughly before operating the
machine
Stop the tractor engine and take away the ignition key before any
servicing and repair work
Keep safe distance off the machine
Never reach into the crushing area as long as the components can
move
Stay away of the machine tilting area
Points of attaching hooks of the lifting equipment
PROSIMY O REGULARNE SMAROWANIE
PUNKTÓW SMARNYCH
ATTENTION
PLEASE OIL REGULARLY LUBRICATION
POINTS UNDER THE OPERATING
H
MANUAL
ACHTUNG
WIR BITTEN REGELMABIG DIE
SCHMEIRSTELLEN LAUT
BEDIENUNGSANLEITUNG ZU
G
Lubricate the machine on regular basis
Speed limit sign
- 7 -
Loading...