UNIA HARRIER Operating And Maintenance Manual
OPERATING AND MAINTENANCE MANUAL HARRIER
PN-EN ISO 12100:2012
PN-EN-ISO 13857:2010
PN-ISO 3600:1998
PN-EN-ISO 4413:2011
PN-ISO 11684:1998
PN-EN 349+A1:2010
PN-EN ISO 11688-1:2010
PN-EN 14017+A2:2009
PN-EN ISO 4254-1:2016-02
PN-EN 13739-1:2012
Grudziądz, 05.12.2017
CE Declaration of Conformity
CE Declaration of Conformity
UNIA Sp. z o.o.
st. Szosa Torunska 32/38
86 – 300 Grudziadz, Poland
Herewith declare with full responsibility that our product:
chisel plough
type / model : …………………………………….
manufacturing year : ……………………………..
serial no. : ………………………………………..
is in compliance with the Ordinance of the Minister of
Economy of October 21, 2008 (Journal of Laws No. 199, item
1228) and the EU Directive 2006/42/EC of May 17, 2006 and the
Ordinance of the Minister of Infrastructure of May 4, 2009 (
Journal of Laws No. 75/2009, item 639) and the following
standards:
HARRIER
This CE Declaration of Conformity is no longer valid if the
machine has been modified or reconstructed without the
manufacturer’s consent.
- 1 -
OPERATING AND MAINTENANCE MANUAL HARRIER
Type
Production year
Serial no.
This maintenance and operating manual is an integral part of the
Before starting the machine please read the
of the machine.
st. Szosa Torunska 32/38
UNIA Sp. z o.o.
PL 86 – 300 Grudziadz
tel. + 48 56 451 05 00
fax. + 48 56 451 05 01
Service tel. + 48 56 451 05 26
uniamachines.com
chisel plough
HARRIER
MAINTENANCE AND OPERATING
MANUAL
Machine identification data:
machine. It is important that the manual is always in the possession
of the machine user. Access to the manual should be provided to
machine operators and cooperating persons while operation,
regulation, repairs and renovations.
operating manual and follow the recommendations
and instructions regarding safety and proper usage
OPERATING AND MAINTENANCE MANUAL HARRIER
Table of contents
PREFACE: ............................................................................................................................................... 5
1.
Precautions ..................................................................................................................................... 5
1.1 Before you Begin to Use Your Machine ...................................................................................... 5
1.2 Health and safety regulation ...................................................................................................... 5
1.3 Servicing ...................................................................................................................................... 7
1.4 Transport on highways ............................................................................................................... 7
1.5 Safety Symbols ............................................................................................................................ 7
1.6 Nameplate .................................................................................................................................. 9
2.
Technical and Identification Data ................................................................................................. 10
2.1 HARRIER Specification .............................................................................................................. 11
3.
Operating Manual ......................................................................................................................... 12
3.1 First Start .................................................................................................................................. 12
3.2 Preparation of the Machine ..................................................................................................... 12
3.3 Mounting and Disconnection of machines ............................................................................... 13
a)
mounting .......................................................................................................................... 13
b)
disconnecting .................................................................................................................... 13
3.4 Access to the Field – Transport ................................................................................................ 14
3.5 Adjusting the Machine.............................................................................................................. 15
3.5.1 Levelling of Rollers ............................................................................................................ 15
3.5.2 Working Depth Adjustment .............................................................................................. 15
3.5.3 Tine Protection Methods .................................................................................................. 16
a)
bolt protection .................................................................................................................... 16
b)
hydraulic protection ........................................................................................................... 17
3.5.4 Tine Working Components ............................................................................................. 19
4.
Operation ...................................................................................................................................... 19
5.
Servicing and Maintenance ........................................................................................................... 20
5.1 General ..................................................................................................................................... 20
5.2 Replacement of the Machine Components .............................................................................. 20
5.3 Hydraulic System ...................................................................................................................... 20
5.4 Lighting ..................................................................................................................................... 21
5.5 Bolt, screw and nut tightening torques (Nm) ........................................................................... 21
5.6 Lubrication ................................................................................................................................ 22
5.7 Storage of the Machine ............................................................................................................ 23
5.8 Disassembly and Disposal ......................................................................................................... 23
5.9 Warranty Conditions and Warranty Services ........................................................................... 23
- 4 -
OPERATING AND MAINTENANCE MANUAL HARRIER
PREFACE:
When buying the machine, check completeness of its accessories that include the following
components:
• Operating Manual
• Warranty Card
1. Precautions
1.1 Before you Begin to Use Your Machine
• Read the instruction manual.
• Pay always special attention to the text and illustrations marked with this
symbol!
• These machines are intended for agricultural use only. Any use outside of this purpose shall
be considered as not intended use. Learn how to use your machine correctly and carefully!
• The machine may be dangerous when operated by not authorized individual or when
operated carelessly.
1.2 Health and safety regulation
• Before each start, check whether the tractor and machine are safe for road traffic and
operation!
• The tractor working with the machine must be equipped with the weights on the front axis
or on front jack. Balance of the tractor with the attached machine, its steerability and
braking ability must always be kept.
• When connecting and disconnecting the machine to/from the tractor, its lifting and
lowering on the hydraulic lift of the tractor, setting the machine in the transport and
working positions and on the headlands, ensure that no bystanders and in particular
children are present in the vicinity of the machine. Perform these operations slowly, without
sudden jerks!
• Never stay between the tractor and the machine when the tractor’s engine is running!
• The machine may only be operated, maintained and repaired by the personnel who know
its construction and are aware of the existing hazards!
• There are some places where crushing or cutting may occur on the parts actuated by the
forces other than the human force (e.g. the hydraulic system). When connecting the
hydraulic hoses to the hydraulic system of the tractor, always ensure that the hydraulics is
depressurized! Check positions of the control levers of the tractor hydraulic system. Only
actuate the hydraulically operated attachments when there is nobody present within their
range of operation! Check the hydraulic hoses on regular basis and replace them with new
items when damaged or worn!
• When driving on highways with the machine attached, lock the operating lever against its
lowering!
• The attached warning and indicating signs contain information on safe work: they are
- 5 -
OPERATING AND MAINTENANCE MANUAL HARRIER
intended for your safety!
• Before you start work, learn thoroughly operation of all devices and actuators and functions
of the machine. It is too late for this after you start work!
• Avoid wearing any loose clothing, which could be caught by rotating components of the
machine.
• Always keep the machine clean in order to avoid the danger of fire!
• Always check the surroundings before you start operation. Make sure that you have
sufficient visibility!!
• Never back or reverse the tractor when the machine is lowered to the working position.
When reversing, pay attention to the components that protrude far away and do not use
the independent brakes of the tractor!
• Check air pressure in the wheels of the tractor and the machine regularly.
• Never transport people on the machine and load it with any additional weights when
operating the machine or transporting it!
• Check and attach the traffic equipment, such as lighting, warning devices and possible
protective devices.
• Observe the admissible axial loads, total weights and transport dimensions.
• Check tightness of screws and nuts on regular basis and tighten them if required.
• Always use appropriate tools and wear safety gloves when changing tools.
• The spare parts must be conforming to the revisions specified by the manufacturer. This
may only be provided by the genuine spare parts. Use typical protection devices and pins
for securing all bolts of the machines (tractor + machine). Never use any temporary means
of protection, such as screws, bars, and wires etc., which can cause damage to the machine
or tractor during transport and cause a safety hazard for other road users!
• Attach and disconnect the machine to/from the tractor after having parked the machine on
a flat and hardened surface and with the tractor engine stopped. Store the machines
unfolded.
• Store the machine in the locations inaccessible for unauthorized people or animals when
not in use.
• Besides the above guidelines, follow the general safety rules.
- 6 -
OPERATING AND MAINTENANCE MANUAL HARRIER
1.3 Servicing
• Service the machine when it is lowered onto the ground! If the machine is
coupled with the tractor, engine of the tractor must be off and brakes on!
• Use only tools in good technical condition and genuine materials and spare
parts for servicing.
• Always protect the machine with appropriate supports when performing any maintenance
or repair work on the machine lifted up.
1.4 Transport on highways
• Never exceed the speed limits allowed on highways and follow traffic
regulations of the respective country!
• Pay special attention when passing and overtaking other vehicles and on
curves (the unit is pivotally connected to the tractor)!
• The machine, as the part of the vehicle that protrudes outside the rear side outline of the
tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic.
• When transporting the machine on highways, always use warning lights, distinguishing plate
and side reflectors.
• Maximum width of the machine, which can be moved on highways is specified in the
detailed regulations of the country of use. They should be observed.
1.5 Safety Symbols
A
B
C
D
Read through the Operating Manual thoroughly before operating the
machine
Stop the tractor engine and take away the ignition key before any
servicing and repair work
Keep safe distance off the machine
Never reach into the crushing area as long as the components can
move
E
Stay away of the machine tilting area
- 7 -
Loading...