UNIA CROSS S Operating And Maintenance Manual
OPERATING AND MAINTENANCE MANUAL CROSS S
- 1 -
CE Declarat ion of Conformity
CE Declaration of Conformity
UNIA Sp. z o.o.
st. Szosa Torunska 32/38
86 – 300 Grudziadz, Poland
Herewith declare with full responsibility that our product:
cultivator for simplified tillage
CROSS
type / model : …………………………………….
manufacturing year : ……………………………..
serial no. : ………………………………………..
is in compliance with the Ordinance of the Minister of
Economy of October 21, 2008 (Journal of Laws No. 199, item
1228) and the EU Directive 2006/42/EC of May 17, 2006 and
the Ordinance of the Minister of Infrastructure of May 4, 2009 (
Journal of Laws No. 75/2009, item 639) and the following
standards:
PN-EN ISO 12100:2012
PN-EN-ISO 13857:2010
PN-ISO 3600:1998
PN-EN-ISO 4413:2011
PN-ISO 11684:1998
PN-EN 349+A1:2010
PN-EN ISO 11688-1:2010
PN-EN 14017+A2:2009
PN-EN ISO 4254-1:2016-02
PN-EN 13739-1:2012
This CE Declaration of Conformity is no longer valid if the
machine has been modified or reconstructed without the
manufacturer’s consent.
Grudziądz, 05.12.2017
OPERATING AND MAINTENANCE MANUAL CROSS S
- 3 -
UNIA Sp. z o.o.
st. Szosa Torunska 32/38
PL 86 – 300 Grudziadz
tel. + 48 56 451 05 00
fax. + 48 56 451 05 01
Service tel. + 48 56 451 05 26
uniamachines.com
CROSS S
MAINTENANCE AND OPERATING
MANUAL
Machine identification data:
Type
Production year
Serial no.
This maintenance and operating manual is an integral part of the
machine. It is important that the manual is always in the possession
of the machine user. Access to the manual should be provided to
machine operators and cooperating persons while operation,
regulation, repairs and renovations.
Before starting the machine please read the
operating manual and follow the recommendations
and instructions regarding safety and proper usage of
the machine.
OPERATING AND MAINTENANCE MANUAL CROSS S
- 4 -
Table of contents
PREFACE: ................................................................................................................................................. 6
1. Precautions .................................................................................................................................. 6
1.1. Before you Begin to Use Your Machine............................................................................... 6
1.2. Health and safety regulations ............................................................................................. 6
1.3. Servicing .............................................................................................................................. 7
1.4. Transport on highways ........................................................................................................ 7
1.5. Safety Symbol ...................................................................................................................... 8
1.6. Nameplate ........................................................................................................................... 9
2. Technical and Identification Data .............................................................................................. 10
2.1. CROSS Specifications .............................................................................................................. 11
3. Operating Manual ..................................................................................................................... 12
3.1. First Start ........................................................................................................................... 12
3.2. Preparation of the Unit (Tractor + Machine) .................................................................... 12
3.3. Mounting and Disconnection of machines ........................................................................ 13
3.3.1. Mounted machines ................................................................................................... 13
3.3.2. Semi-mounted machines .......................................................................................... 14
3.4. Access to the Field – Transport ......................................................................................... 15
3.4.1 Mounted machines ................................................................................................... 15
3.4.2 Semi-mounted machines .......................................................................................... 16
3.5. Adjustment of the Cultivator ............................................................................................. 17
3.5.1. Working Depth Adjustment - Cross .......................................................................... 17
3.5.2. Adjustment of the Working Depth of the Disc Harrow Type A ................................. 18
3.5.3. Extreme Disc Adjustment in the Cross Harrow Type A ............................................ 18
3.5.4. Heavy-Duty Tine, Type CX ......................................................................................... 19
3.5.5.Working Depth Adjustment in the Cross Drive ................................................................ 20
3.5.6. Working Depth Adjustment on the Drawbar in the Cross Drive ............................... 20
3.5.7. Working Depth Adjustment on the Support Wheel in the Cross DRIVE (Option) .... 21
3.5.8. Adjustment of Scraping Disc Harrow Type A in the Cross DRIVE .............................. 22
3.5.9. Adjustment of Scraping Disc Harrow Type B in the Cross DRIVE .............................. 22
3.5.10. Adjustment of Extreme Disc Type B in the Cross DRIVE ........................................... 23
4. Operation (see par. II Safety) .................................................................................................... 24
5. Servicing and Maintenance ....................................................................................................... 24
OPERATING AND MAINTENANCE MANUAL CROSS S
- 5 -
5.1. General .............................................................................................................................. 24
5.2. Replacement of the Machine Components....................................................................... 24
5.3. Hydraulic System ............................................................................................................... 24
5.4. Lighting .............................................................................................................................. 25
5.5. Bolt, screw and nut tightening torques (Nm) .................................................................... 25
5.6 Lubrication ........................................................................................................................ 26
5.7. Storage of the Cultivator ................................................................................................... 27
5.8. Disassembly and Disposal .................................................................................................. 27
5.9 Warranty Conditions and Warranty Services .................................................................... 27
OPERATING AND MAINTENANCE MANUAL CROSS S
- 6 -
PREFACE:
When buying the machine, check completeness of its accessories that include the following
components:
• Operating Manual
• Warranty Card
1. Precautions
1.1. Before you Begin to Use Your Machine
• Read the instruction manual.
• Pay always special attention to the text and illustrations marked with this symbol!
• These machines are intended for agricultural use only. Any use outside of this
purpose shall be considered as not intended use. Learn how to use your machine
correctly and carefully!
• The machine may be dangerous when driven by not authorized individual or when operated
carelessly.
1.2. Health and safety regulations
• Before each start, check whether the tractor and machine are safe for road traffic and
operation!
• The tractor working with the machine must be equipped with the weights on the front axis!
Balance of the tractor with the attached machine, its steerability and braking ability must
always be kept.
• When connecting and disconnecting the machine to/from the tractor, its lifting and lowering
on the hydraulic lift of the tractor, setting the machine in the transport and working positions
and on the headlands, ensure that no bystanders and in particular children are present in the
vicinity of the machine. Perform these operations slowly, without sudden jerks!
• Never stay between the tractor and cultivator when the tractor’s engine is running!
• The machine may only be operated, maintained and repaired by the personnel who know its
construction and are aware of the existing hazards!
• There are some places where crushing or cutting may occur on the parts actuated by the
forces other than the human force (e.g. the hydraulic system). When connecting the
hydraulic hoses to the hydraulic system of the tractor, always ensure that the hydraulics is
depressurized! Check positions of the control levers of the tractor hydraulic system. Only
actuate the hydraulically operated attachments when there is nobody present within their
range of operation! Check the hydraulic hoses on regular basis and replace them with new
items when damaged or worn!
• When driving on highways with the machine attached, lock the operating lever against its
lowering!
• The attached warning and indicating signs contain information on safe work: they are
intended for your safety!
OPERATING AND MAINTENANCE MANUAL CROSS S
- 7 -
• Before you start work, learn thoroughly operation of all devices and actuators and functions
of the machine. It is too late for this after you start work!
• Avoid wearing any loose clothing, which could be caught by rotating components of the
machine.
• Always keep the machine clean in order to avoid fire!
• Always check the surroundings before you start operation. Make sure that you have
sufficient visibility!!
• Never back or reverse the tractor when the machine is lowered to the working position.
When reversing, pay attention to the components that protrude far away and do not use the
independent brakes of the tractor!
• Check air pressure in the wheels of the tractor and cultivator regularly.
• Never transport people on the machine and load it with any additional weights when
operating the machine or transporting it!
• Check and attach the traffic equipment, such as lighting, warning devices and possible
protective devices.
• Observe the admissible axial loads, total weights and transport dimensions.
• Check tightness of screws and nuts on regular basis and tighten them if required.
• Always use appropriate tools and wear safety gloves when changing tools.
• The spare parts must be conforming to the revisions specified by the manufacturer. This may
only be provided by the genuine spare parts. Use typical protection devices and pins for
securing all bolts of the unit (tractor + machine). Never use any temporary means of
protection, such as screws, bars, wires etc., which can cause damage to the machine or
tractor during transport and cause a safety hazard for other road users!
• Attach and disconnect the machine to/from the tractor after having parked the machine on a
flat and hardened surface and with the tractor engine stopped. Store the machines unfolded.
• Store the machine in the locations inaccessible for unauthorized people or animals when not
in use.
• Besides the above guidelines, follow the general safety rules.
1.3. Servicing
• Service the machine when it is lowered onto the ground! If the machine is
coupled with the tractor, engine of the tractor must be off and brakes on!
• Use only tools in good technical condition and genuine materials and spare parts
for servicing.
• Always protect the machine with appropriate supports when performing any maintenance or
repair work on the machine lifted up.
1.4. Transport on highways
• Never exceed the speed limits allowed on highways and follow traffic regulations
of the respective country!
• Pay special attention when passing and overtaking other vehicles and on curves
(the unit is pivotally connected to the tractor)!
OPERATING AND MAINTENANCE MANUAL CROSS S
- 8 -
• The machine, as the part of the vehicle that protrudes outside the rear side outline of the
tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic.
• When transporting the machine on highways, always use warning lights, distinguishing plate
and side reflectors.
• Maximum width of the machine, which can be moved on highways is specified in the detailed
regulations of the country of use. They should be observed.
1.5. Safety Symbol
A
Read through the Operating Manual thoroughly before operating the
machine
B
Stop the tractor engine and take away the ignition key before any
servicing and repair work
C
Keep safe distance off the machine
D
Never reach into the crushing area as long as the components can
move
E
Stay away of the machine tilting area
F
Points of attaching hooks of the lifting equipment
G
Speed limit sign
H
UWAGA
PROSIMY O REGULARNE SMAROWANIE PUNKTÓW
SMARNYCH
ATTENTION
PLEASE OIL REGULARLY LUBRICATION POINTS
UNDER THE OPERATING MANUAL
ACHTUNG
WIR BITTEN REGELMABIG DIE SCHMEIRSTELLEN
LAUT BEDIENUNGSANLEITUNG ZU SCHMIEREN
Lubricate the machine on regular basis
I
ACCORDING TO THE ROAD SAFETY REGULATIONS (REGULATION OF THE MINISTER OF
INFRASTRUCTURE OF 31/12/2002 - DZ. U. NO. 32 OF 2002, ITEM 26 2), DRIVE ON HIGHWAYS ONLY
AFTER HAVING OBTAINED AUTHORIZATION FROM THE COMPETENT HIGHWAYS
ADMINISTRATION BODY WHERE THE JOURNEY BEGINS.
For the machines that exceed the allowable transport width 3.0m
Safety signs and inscriptions should be protected against damage, dirt and overpainting.
Replace any damaged or illegible signs and inscriptions with new ones that are available
from the manufacturer or vendor of the machines.
OPERATING AND MAINTENANCE MANUAL CROSS S
- 9 -
Fig 1: Location of the safety symbols - CROSS
Fig 2: Location of the safety symbols - CROSS DRIVE
1.6. Nameplate
The unit data can be found on the nameplate,
which is mounted on its front, on the left –
CROSS (3.0m; 3.5m; 4.0m) CROSS DRIVE
(3.0m; 3,.5m; 4.0m).
Loading...