UNIA ARES L series, ARES L 3.0, ARES L 2.5, ARES L 3.5, ARES L 6.0H Operating And Maintenance Manual
...
OPERATING AND MAINTENANCE MANUAL ARES L
- 1 -
CE Declarat ion of Conformity
CE Declaration of Conformity
UNIA Sp. z o.o.
st. Szosa Torunska 32/38
86 – 300 Grudziadz, Poland
Herewith declare with full responsibility that our product:
disc cultivator
ARES L
type / model : …………………………………….
manufacturing year : ……………………………..
serial no. : ………………………………………..
is in compliance with the Ordinance of the Minister of
Economy of October 21, 2008 (Journal of Laws No. 199, item
1228) and the EU Directive 2006/42/EC of May 17, 2006 and
the Ordinance of the Minister of Infrastructure of May 4, 2009 (
Journal of Laws No. 75/2009, item 639) and the following
standards:
PN-EN ISO 12100:2012
PN-EN-ISO 13857:2010
PN-ISO 3600:1998
PN-EN-ISO 4413:2011
PN-ISO 11684:1998
PN-EN 349+A1:2010
PN-EN ISO 11688-1:2010
PN-EN 14017+A2:2009
PN-EN ISO 4254-1:2016-02
PN-EN 13739-1:2012
This CE Declaration of Con formity is no longer valid if the
machine has been modified or reconstructed without the
manufacturer’s consent.
Grudziądz, 05.12.2017
OPERATING AND MAINTENANCE MANUAL ARES L
- 3 -
UNIA Sp. z o.o.
st. Szosa Torunska 32/38
PL 86 – 300 Grudziadz
tel. + 48 56 451 05 00
fax. + 48 56 451 05 01
Service tel. + 48 56 451 05 26
uniamachines.com
ARES L
OPERATING AND MAINTENANCE
MANUAL
Machine identification data:
Type
Production year
Serial no.
This maintenance and operating manual is an integral part of the
machine. It is important that the manual is always in the possession
of the machine user. Access to the manual should be provided to
machine operators and cooperating persons while operation,
regulation, repairs and renovations.
Before starting the machine please read the operating
manual and follow the recommendations and
instructions regarding safety and proper usage of the
machine.
OPERATING AND MAINTENANCE MANUAL ARES L
- 4 -
PREFACE:................................................................................................................................................ 5
1. Precautions .................................................................................................................................. 5
1.1 Before you Begin to Use Your Machine ................................................................................... 5
1.2 Health and safety regulations .................................................................................................. 5
1.3 Servicing ................................................................................................................................... 6
1.4 Transport on highways ............................................................................................................ 7
1.5 Safety Symbol .......................................................................................................................... 7
1.6 Nameplate ............................................................................................................................... 9
2. Technical and Identification Data .............................................................................................. 10
2.1 ARES L specifications ............................................................................................................. 12
3. Operating Manual ...................................................................................................................... 19
3.1 First Start ............................................................................................................................... 19
3.2 Preparation of the Unit (Tractor + Machine) ......................................................................... 19
3.3 Connection and Disconnection .............................................................................................. 20
3.3.1 Mounted machines ............................................................................................................ 20
3.3.2 Semi-mounted machines ................................................................................................... 21
3.4 Transport on highways .......................................................................................................... 22
3.5 Adjustment of the Cultivator ................................................................................................. 23
3.5.1 Working Depth Adjustment on the roller .......................................................................... 23
3.5.2 Working depth adjustment on the drawbar (chassis option, drive) ................................. 23
3.5.3 Working depth adjustment on the tyre roller ARES L 4.5;6.0 DRIVE ................................ 24
3.5.4 Levelling fingers adjustment ARES L 4.5;6.0 ...................................................................... 24
3.5.5 Front skid adjustment (skid option) .................................................................................. 25
3.5.6 Adjustment of the external disc ........................................................................................ 25
3.5.7 Adjustment of the Folding Hydraulic System ARES L 4.5; 6.0 ........................................... 26
3.5.8 Deflectors adjustment (deflector option) ......................................................................... 26
3.5.9 Brakes adjustment (chassis with brakes option) ............................................................... 27
3.5.10 Seeder support adjustment (hydropak option - ARES L 2.5; 3.0; 3.5; 4.0) .................... 28
3.5.11 Support wheel adjustment (option) .............................................................................. 28
4. Operation ................................................................................................................................... 29
5. Servicing and Maintenance ....................................................................................................... 29
5.1 General .................................................................................................................................. 29
5.2 Replacement of the Machine Components ........................................................................... 29
5.2.1 Bolt, screw and nut tightening torques (Nm) .................................................................... 29
5.3 Lubrication ............................................................................................................................. 30
5.3.1 Lubraction point ................................................................................................................ 31
5.4 Storage of the Cultivator ....................................................................................................... 31
5.5 Disassembly and Disposal ..................................................................................................... 32
5.6 Warranty Conditions and Warranty Services ........................................................................ 32
OPERATING AND MAINTENANCE MANUAL ARES L
- 5 -
PREFACE:
When buying the machine, check completeness of its accessories that include the following
components:
•
Operating Manual
•
Warranty Card
1. Precautions
1.1 Before you Begin to Use Your Machine
• Always pay special attention to the text and illustrations marked with this
symbol!
• These machines are intended for agricultural use only. Any use outside of this purpose
shall be considered as not intended use. Learn how to use your machine correctly and
carefully!
• The machine may be dangerous when driven by not authorized individual or when
operated carelessly.
1.2 Health and safety regulations
• Before each start, check whether the tractor and machine are safe for road traffic and
operation!
• The tractor working with the machine must be equipped with the weights on the front
axis! Balance of the tractor with the attached machine, its steerability and braking ability
must always be kept.
• When connecting and disconnecting the machine to/from the tractor, its lifting and
lowering on the hydraulic lift of the tractor, setting the machine in the transport and
working positions and on the headlands, ensure that no bystanders and in particular
children are present in the vicinity of the machine. Perform these operations slowly,
without sudden jerks!
• Never stay between the tractor and cultivator when the tractor’s engine is running!
• The machine may only be operated, maintained and repaired by the personnel who know
its construction and are aware of the existing hazards!
• There are some places where crushing or cutting may occur on the parts actuated by the
forces other than the human force (e.g. the hydraulic system). When connecting the
hydraulic hoses to the hydraulic system of the tractor, always ensure that the hydraulics is
depressurized! Check positions of the control levers of the tractor hydraulic system. Only
actuate the hydraulically operated attachments when there is nobody present within their
range of operation! Check the hydraulic hoses on regular basis and replace them with new
items when damaged or worn!
• When driving on highways with the machine attached, lock the operating lever against its
lowering!
• The attached warning and indicating signs contain information on safe work: they are
intended for your safety!
OPERATING AND MAINTENANCE MANUAL ARES L
- 6 -
• Before you start work, learn thoroughly operation of all devices and actuators and
functions of the machine. It is too late for this after you start work!
• Avoid wearing any loose clothing, which could be caught by rotating components of the
machine.
• Always keep the machine clean in order to avoid fire!
• Always check the surroundings before you start operation. Make sure that you have
sufficient visibility!!
• Never back or reverse the tractor when the machine is lowered to the working position.
When reversing, pay attention to the components that protrude far away and do not use
the independent brakes of the tractor!
• Check air pressure in the wheels of the tractor and cultivator regularly.
• Never transport people on the machine and load it with any additional weights when
operating the machine or transporting it!
• Check and attach the traffic equipment, such as lighting, warning devices and possible
protective devices.
• Observe the admissible axial loads, total weights and transport dimensions.
• Check tightness of screws and nuts on regular basis and tighten them if required.
• Always use appropriate tools and wear safety gloves when changing tools.
• The spare parts must be conforming to the revisions specified by the manufacturer. This
may only be provided by the genuine spare parts. Use typical protection devices and pins
for securing all bolts of the unit (tractor + machine). Never use any temporary means of
protection, such as screws, bars, wires etc., which can cause damage to the machine or
tractor during transport and cause a safety hazard for other road users!
• Attach and disconnect the machine to/from the tractor after having parked the machine
on a flat and hardened surface and with the tractor engine stopped. Store the machines
unfolded.
• Store the machine in the locations inaccessible for unauthorized people or animals when
not in use.
• Besides the above guidelines, follow the general safety rules.
1.3 Servicing
• Service the machine when it is lowered onto the ground! If the machine is coupled
with the tractor, engine of the tractor must be off and brakes on!
• Use only tools in good technical condition and genuine materials and spare parts for
servicing.
• Always protect the machine with appropriate supports when performing any maintenance
or repair work on the machine lifted up.
OPERATING AND MAINTENANCE MANUAL ARES L
- 7 -
1.4 Transport on highways
• Service the machine when it is lowered onto the ground! If the machine is coupled
with the tractor, engine of the tractor must be off and brakes on!
•
Pay special attention when passing and overtaking other vehicles and on curves (the unit is
rigidly connected to the tractor)!
•
The machine, as the part of the vehicle that protrudes outside the rear side outline of the
tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the
traffic.
•
When transporting the machine on highways, always use warning lights, distinguishing
plate and side reflectors.
•
Maximum width of the machine, which can be moved on highways is 3m! For machines
with a transport width above 3m, a permission to move on highways issued by the
appropriate road administration is required!
1.5 Safety Symbol
A
Read through the Operating Manual thoroughly before operating the
machine
B
Stop the tractor engine and take away the ignition key before any
servicing and repair work
C
Keep safe distance off the machine
D
Never reach into the crushing area as long as the components can
move
E
Stay away of the machine tilting area
F
Points of attaching hooks of the lifting equipment
G
Speed limit sign
H
UWAGA
PROSIMY O REGULARNE SMAROWANIE PUNKTÓW SMARNYC H
ATTENTION
PLEASE OIL REGULARLY LUBRICATION POINTS UNDER THE
OPERATING MANUAL
ACHTUNG
WIR BITTEN REGELMABIG DIE SCHMEIRSTELLEN LAUT
BEDIENUNGSANLEITUNG ZU SCHMIEREN
Lubricate the machine on regular basis
OPERATING AND MAINTENANCE MANUAL ARES L
- 8 -
I
ACCORDING TO THE ROAD SAFETY REGULATIONS (REGULATION OF THE M INI STER OF
INFRASTRUCTURE OF 31/12/2002 - DZ. U. NO. 32 OF 2002, ITEM 262), DRIVE ON HIGHWAYS ONLY
AFTER HAVING OBTAINED AUTHORIZATION FROM THE COMPETENT HIGHWAYS
ADMINISTRATION BODY WHERE THE JOURNEY BEGINS.
For the machines that exceed the allowable transport width 3.0m
Safety signs and inscriptions should be protected against damage, dirt and overpainting.
Replace any damaged or illegible signs and inscriptions with new ones that are available
from the manufacturer or vendor of the machines.
Fig. 1. Safety symbols ARES L DRIVE
OPERATING AND MAINTENANCE MANUAL ARES L
- 9 -
Fig. 2. Safety symbols ARES L H
1.6 Nameplate
The unit data can be found on the nameplate, which is mounted on its front.
Loading...