Uncle Milton Lightshow DJ User Manual

INSTRUCTION

INSTRUCTION

MANUAL

MANUAL

Get ready to experience your favorite music in a whole new way. Now
you can create a dazzling light show right in your room! Lightshow DJ
syncs with your music, lling your ceiling and walls with multi-colored
lights that pulse and dance to the beat of your favorite tunes. Customize
the settings to reect your own style and mood. Are you ready? Let the
music light show begin!

Parts included:

- 1 Projection Unit

- 1 Base

- 2 Light Eect Lenses

- 1 Decal Sheet

Battery Installation

Tool required - Small Phillips head screwdriver

Lens
Storage

6+

2168

Light Eect

Lenses

Projection Unit

Base

1. Using a Phillips head screwdriver, remove the battery cover of the
Projection Unit as shown. (Fig. 1)

2. Insert 3 AA/LR6 batteries as indicated in the battery compartment
and replace cover.

SET UP

Audio Input

For best response to your music, position Lightshow DJ next to the
speaker of any audio source with the Lightshow DJ microphone
angled toward the speaker as shown. (Fig. 2)

Adjustable Projection Angle

Set Lightshow DJ in its base to project at one of four angles on your
walls or ceiling. Each angle will create a dierent light eect on your
wall. For best projection, position Lightshow DJ four to twelve inches
from a white wall. (Fig. 3)

Personalize your Lightshow DJ
You can personalize your Light Show DJ light pod base in many ways.
Peel and apply the stickers included in the package or customize with
your own stickers or other decorations.

Fig. 1

Microphone

Fig. 2

Fig. 3

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE — DO NOT DISCARD

Questions? Visit unclemilton.com

Batteries not included

AA/LR6

x3

Requires 3 x 1.5V AA/LR6 batteries

FOR BEST ILLUMINATION, USE IN A DARKENED ROOM.

OPERATION

On/O

1. Press the MODE button once to turn on Lightshow DJ.

2. To turn o Lightshow DJ, press and hold the MODE button.

When you rst turn on Lightshow DJ the settings are pre-selected as follows:
Music Program = Fast Beat
Color Selection = Random
Sensitivity = Level 3

Note: Internal memory will store your music and color mode settings after each use.

Music Program Selection Mode

1. Press the Mode button until all the LEDs ash GREEN. This indicates that the product is in Music Program Selection Mode.

2. Press up (to Fast Beat) or down (to Rolling Wave) on the Selection Bar to select one of the following Music Programs.

Each program will determine the speed and style of how Lightshow DJ responds to the beat of your music. Experiment
with all the dierent music programs to see which best ts your music and personal style.

Fast Beat – Creates quick ashes of light that rapidly pulse to the beat of your music. This program is best for dance music,
rock, pop, and other songs with fast beats.

Selection Bar
(Up & Down)

Mode

Pulsing Vibe – Releases light that grows and pulses to the beat of your music. This program is great with hip hop,
alternative music, country and other songs with mid-tempos and pulsing beats.

Energy Flow – Slowly releases light that ows and surges to the beat of your music. This program works well with jazz,
blues, acoustic, R&B and slower tempo songs that still have distinctive beats.

Rolling Wave – Provides slow, gradual light changes. It’s great for chillin’ out to slow music of any style.

Color Selection Mode

1. Press the Mode button until all the LEDs ash RED. This indicates that the product is in Color Selection mode.

2. Press up or down on the Selection Bar to select your desired color mode.

There are six dierent color modes to choose from that provide a variety of vibrant colors in dierent combinations. The
default color mode is set at Random. This mode will randomly project dierent color combinations with your music.

Sensitivity Adjustment Mode

1. Press the Mode button until all the LEDs ash BLUE. This indicates that the product is in Sensitivity Adjustment mode. This
mode allows you to adjust how sensitive Lightshow DJ is in the Fast Beat Program. The more sensitive the setting, the
more it will react to your music, both high and low volumes.

2. Manually adjust the audio sensitivity up or down by pressing the Selection Bar. There are ve audio sensitivity settings. The
default sensitivity setting is at level three.

Note: If Lightshow DJ is not responding to the music and the lights are not changing with the music, the audio sensitivity may

need to be adjusted up or down based on speaker volume or the distance of Lightshow DJ to your speaker.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

MANUFACTURED BY UNCLE MILTON INDUSTRIES, INC.

P.O. Box 6281
THOUSAND OAKS, CA 91359 USA

©2013 UMI. All rights reserved. ® and
trademarks of Uncle Milton Industries, Inc.
MADE IN CHINA

TM

designate

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.

Caution: changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.

BATTERY SAFETY INFORMATION

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the toy before being charged.

• Rechargeable batteries are only to be charged under adult supervision.

• Dierent types of batteries or new and used batteries are not to be mixed.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the toy.

• The supply terminals are not to be short-circuited.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

• Do not dispose of batteries in re. Battery may explode or leak.

2168-0250-0513-V01