UltraViolet Devices V-Flex User Manual
ALTRU-V (A Division of UVDI)
26145 Technology Drive
Valencia, CA 91355
Te l 877-PUREUVC
(877-787-3882)
Te l661-295-8140
Fax 661-257-4698
www.altruv.com
vb:
uv_>
• Provides unmatched installation
flexibility and “kill rates” in HVAC
systems of virtually any size, large
or small
• Patent-pending design with multiple
lamp capability per Extrusion. Lamps
can be mounted to any of the four
support faces. Extrusion can be cut to
accommodate any height system
• Multiple high-power, single-ended
biaxial lamps mounted to a single
extrusion as close as 10 inch
centers on each face
• Extrusions are typically installed 32"
apart to cover any width system
• Allows for nesting and overlapping to
accommodate any width or provide
unprecedented UV intensity
•The only commercial, industrial or
institutional UV device to offer 360°
UV irradiance
•Installs easily and requires only
one electrical service hook-up per
Extrusion
•ALT R U-V Lamps have the lowest
output loss in the industry (over their
operating life)
• Fixtures are UL/C-UL Listed under
Category Code ABQK (Accessories,
Air Duct Mounted), UL Standards:
153, 1598 & 1995 respectively
• Optimize any application through our
V-Smart proprietary application
software
UNLEASH THE POWER OF THE V
ALTRU-V products from UVDI are transforming the
application of UV in HVAC maintenance and
improvement of IAQ. The V-Flex™ revolutionary
design offers unmatched installation flexibility and
“kill rates” in HVAC systems of virtually any size,
large or small. The results are lower operating costs,
safer environments for maintenance staff and occu-
pants, and cleaner air. The V-Flex patent-pending
nestable design can be mounted vertically or hori-
zontally, and allows multiple lamps to be mounted to
a single Extrusion.
HIGH-INTENSITY UV AIR STREAM AND
SURFACE DISINFECTION SYSTEM
V-Flex Series Provides Unparalleled Flexibility and UV Intensity
for HVAC Applications—Delivers Cleaner Air, Greater Safety and
Significant Operating Efficiencies
TM 2003 UVDI. ALTRU-V and V-Flex are trademarks owned by UVDI. 21-1002 rev 2 6/03
REPRESENTED BY:
SPECIFICATIONS
V-FLEX UVC Fixture and Lamp
Assemblies are factory assembled and
tested. They consist of a Housing, Power
Supply, Lamp Socket, Lamp, Mounting
Extrusion, Power Module and Extrusion
Mounting Bracket and are to be constructed to withstand HVAC environments.
Fixtures are UL/C-UL Listed under
ABQK Classifications and provide for
unobstructed 360° UVC irradiance from
the lamp to surfaces and the airstream.
Housing is constructed of stainless
steel in a UL drip-proof design that is
equipped with mounting tabs to facilitate
housing positioning and fastening anywhere on the Mounting Extrusion’s four
sides. Power to each fixture is from UL
approved “plug and light” power service
from the Mounting Extrusion Raceway.
The Housing accommodates the Lamp
Socket internally to prevent Lamp pin
exposure to the airstream. The Housing
incorporates all components into one
integral assembly to maximize Lamp
serviceability and to allow for 360° UVC
irradiance from the Lamp to surfaces
and the airstream.
Power Supply is a Class 2, rapid start
type electronic power supply that
includes RF and EMI suppression. Each
is supplied with power via a factory supplied Mounting Extrusion Raceway that
is equipped with a UL approved and
NEC compliant Power Module. The
Power Supply maximizes photon production, radiance and reliability and is UL
Listed for cold and/or moving airstreams
of 55-135° F, and 1000 fpm. Power
requirement is to be 120Vac or
240Vac.
Lamp Socket is constructed of UVC
resistant, commercial grade HVAC
materials designed for long service. They
are protected from the airstream, enclosed
in the housing. The Lamp Socket accommodates a lamp to provide 360° UVC
irradiance to surfaces and the airstream.
Lamp is a very high output, wind chill
resistant, 60-Watt, T5 diameter, hot
cathode, and twin tube bi-axial type
equipped with a four-pin lamp base that
is fully encapsulated when inserted into
the Lamp Socket. The Lamp produces
no less than 80% of its initial UVC output at its end of lamp life, or after 9000
hours of service. Each Lamp contains no
more than 5.0 milligrams of mercury, to
protect the environment and to provide
for future EPA environmental compliance. Each lamp produces its specified
output at 500 fpm in temperatures of
55-135° F. The Lamp does not produce
ozone, fumes or any other contamination.
Mounting Extrusion is UL Listed and
constructed of Bright Anodized, 6463-T5
aluminum extrusion to withstand HVAC
environments and to accommodate the
fixture on any of its four sides.
It is designed with covered Power
Raceways to provide A/C power to each
Specifications subject to change without notice.
Power Supply connected to any of its
four sides. The Mounting Extrusion and
Power Raceway Covers are able to be
field cut-to-length to accommodate any
plenum height.
Power Module is UL Listed and constructed of stainless steel. It is equipped
with mounting tabs to facilitate fastening
to any of the Mounting Extrusion’s four
sides. The Power Module distributes
power to each Mounting Extrusion Raceway in accordance with electrical codes.
Mounting Bracket is constructed of
stainless steel and designed to accommodate, hold and fasten the Mounting
Extrusion to the plenum or duct base.
Independent Testing: The V-Flex UVC
system has been tested to verify specified
performance and conformity to UL/C-UL
as to Category Code ABQK (Accessories,
Air Duct Mounted) and UL Standards:
153, 1598 & 1995 respectively.
The health aspects associated with the
use of this product and its ability to aid
in the disinfection of environmental air
have not been investigated by UL.
Safety Switch: Door close
trips light on after exit.
2.63
14.40
10.00
2.15
Model No.
VF-60
VF-PJM
VF-ME
VF-DMB
VM-60
GVP
SS
Description
V-Flex™ UV Module
V-Flex™ Power Junction Module
V-Flex™ Main Extrusion Kit (Includes Wire Raceway covers)
V-Flex™ Duct Mount Brackets (2)
V-Flex™ Replacement Lamp
Glass Viewport Assembly
Saftey Switch for Accesses – 120Vac
Nom.
Electrical
Dim.
120Vac/240Vac, 50-60Hz, .6A/.3A
-
-
32.5"
-
28.5"
15"
-
Weight
2 Lbs.
1 Lbs.
10 Lbs.
1 Lbs.
1 Lbs.
3 Lbs.
1 Lbs.
Part Number
19-1000
19-1020
19-1040
19-1030
19-4000
17-4013
18-6001
Loading...