Ultravation Uve-1000, Uve-1036, Uve-2000, Uve-2036, Uvs-2036 Owner's Manual

UVS & UVE FIXED LAMP AIR DISINFECTION SYSTEMS

OWNERS GUIDE

Models: UVS- 1000, 2000, 1036, 2036
Models: UVE- 1000, 2000, 1036, 2036

Page 6- Replacement Parts, Warranty

Page 2- Shipping and Packing List, Safety Precautions
Page 3- Installation Steps for fixed Lamps
Page 4- Maintenance, Trouble Shooting
Page 5- Parts Description

LEAVE FOR HOMEOWNER

DC-IH-0215

Table of Contents:

Shipping and Packaging List:

• UVS or UVE Electrical Housing

• 6- ¾ inch 5/16 self tapping sheet metal screws

• Warning Label

• Residential Warranty Card

UVS- 1000, 1036, 2000, 2036

• 1000 Series- 1 9” or 16” Lamp

• 2000 Series- 2 9” or 16” Lamps

• UVS hole placement template

UVE- 1000, 1036, 2000, 2036

• 1000 Series- One 9” or 16” Lamp

• 2000 Series- Two 9” or 16” Lamps

• UVE hole placement template

Safety Precautions:

It is recommended that this unit be installed and
maintained by a trained technician:

WARNING: UV Hazard. Always protect eyes from
ultraviolet light. NEVER look at UV lamps in
operation. Unplug or disconnect power before re­lamping or servicing.

WARNING: Severe eye damage or temporary
blinding may occur.

WARNING: DO NOT operate outside of Air Handler.
Mount lamp base to duct first.

WARNING: No openings in duct are allowed which
would give direct line-of-sight to the UV light.

In the event of accidental breakage or replacement of
the ultraviolet lamp, please ensure that the lamp is
disposed of in accordance with local and state
environmental laws regarding fluorescent lamps
containing mercury.

Notice:

All wiring inside of the duct or air handling system in
direct line of site of the UV lamp must be shielded with
aluminum foil tape or equivalent non-combustible
material. When installing this unit, select a mounting
location that prevents ultraviolet light exposure to
plastic flexible duct liner or other plastic components
with unknown resistance to ultraviolet light. Ultraviolet
light may cause color shift or structural degradation of
plastic HVAC components

2