Ultravation 92-046, 92-047, 92-048, 92-049, 92-053 Owner's Manual

...
Complete Whole House Air Cleaning System
Photronic Base
Media Air Cleaner
OWNERS GUIDE
Models: 92-052, 92-053, 92-054 (small) 24VAC- 92-055, 92-056, 92-057
Models: 92-058, 92-059, 92-060 (small) 24VAC- 92-061, 92-062, 92-063
Page 2- Shipping and Packaging list, Introduction and Application, Safety Precautions, Power Consumption,
Page 3-Installation Requirements, Fixed Germicidal Lamp Installation Page 4- Remote Germicidal Lamp Installation Page 5- Maintenance, Replacing Filter
Page 6- Warranty, Replacement Part Numbers
LEAVE FOR HOMEOWNER
DC-IH-0209
Air Handler Base
Furnace Base
Table of Contents:
Shipping and Packaging List:
Filter Housing including Access Doors
MERV-11 Media Air Filter
PCO Filter
1 Door w/ handles
2 Lamps gaskets
2- 17” UVC lamps
4- 1 inch UVC lamp mounting screws
6- ¾ inch 5/16 self tapping sheet metal screws
*2- UVC Lamps remote Part:
12” UVC lamp option OR
17” UVC lamp option
*4- 1 inch UVC lamp mounting screws
*8- 1/2 inch 5/16 self tapping screws
*2- UVC Lamp Mounting Plates
**50VA 24v secondary transformer
* Included when remote UVC option is purchased ** Included when 24v unit is purchased
Introduction and Applications:
This Ultravation Photronic Air Handler Base Air Cleaner is a complete whole house air cleaning system. This high efficiency air filtration unit is designed to remove dirt, dust, pollen, microscopic particles, reduce unpleasant odors, VOC gases and the microbial population from the air that circulates through it. By adding this device to your HVAC system, you are helping to create a cleaner indoor living environment for your whole household.
The system works in 1-3 steps. STEP 1: Trapping particles in the pleats of the MERV 11
media filter. With an extra large surface area, the filter allows for maximum dirt holding capacity and a long, useful filter life with minimum air flow restriction.
STEP 2: VOC’s and gases such as the f umes from new carpets, paints, nail polish, cigar and cigarette smoke are drastically reduced photo chemically via a patented process known as photo catalytic conversion or photo catalytic oxidation.
STEP 3: Germicidal UVC light is applied to the Air and problematic HVAC components to drastically reduce unwanted Virus, Bacteria and Mold.
This air cleaner is to be installed in a forced air heating, cooling and ventilation system. It should be installed so that all the system’s air is circulated through the filter first and VOC Section second. The air cleaner will only filter the air that is circulated through it. For maximum filtration effect, set your blower to operate continuously.
Safety Precautions:
It is recommended that this unit be installed and maintained by a trained technician:
WARNING: UV Hazard. Always protect eyes from ultraviolet light. NEVER look at UV lamps in operation. Unplug or disconnect power before re­lamping or servicing.
WARNING: Severe eye damage or temporary blinding may occur.
WARNING: DO NOT operate outside of Air Handler. Mount lamp base to unit first.
WARNING: No openings in duct are allowed which would give direct line-of-sight to the UV light.
In the event of accidental breakage or replacement of the ultraviolet lamp, please ensure that the lamp is disposed of in accordance with local and state environmental laws regarding fluorescent lamps containing mercury.
Notice:
All wiring inside of the duct or air handling system in direct line of site of the UV lamp must be shielded with aluminum foil tape or equivalent non-combustible material. When installing this unit, select a mounting location that prevents ultraviolet light exposure to plastic flexible duct liner or other plastic components with unknown resistance to ultraviolet light. Ultraviolet light may cause color shift or structural degradation of plastic HVAC components
Power Consumption UV-C lamps
Lamp Type Quantity Required
17-inch UVC lamp are 22 watts each 2
With Remote UVC
12-inch UVC lamp are 12 watts each 2
OR
17-inch UVC lamp are 22 watts each 2
Loading...
+ 4 hidden pages