Power Fogger Industrial Line
and PFI w/ LSG
Operator’s Manual
www.ultratecfx.com
VER. 30.10.10
Table of Contents
Introduction ................................................................................ 3
Microprocessor Control ............................................................3
Water Base Fog Technology ...................................................... 3
Warning ...................................................................................... 3
Important Safety Instructions: ................................................... 3
Safety Precautions ..................................................................... 3
PFI Technical Specications ....................................................... 4
PFI Technical Drawings .............................................................. 4
Power Fogger Industrial ............................................................ 4
Power Fogger Industrial 9D ....................................................... 5
LSG w/ PFI Technical Drawings ................................................. 6
LSG PFI System on a Cart .......................................................... 6
LSG PFI System in a Roadcase ................................................... 6
Operating Procedure ................................................................. 7
Operating Procedure w Air Option ............................................ 7
Operation Procedure
LSG MK II High Pressure w/ 20 & 50lbs Cylinders ...................... 8
Figure A ................................................................................... 9
Figure B .................................................................................. 10
Operation Procedure
LSG MK II Low Pressure w/ 350lbs Dewar Tank ....................... 11
Figure C ................................................................................. 12
Options ..................................................................................... 13
Optional Show Control Remote Operations .......................... 13
Show Control Remote LED Indicator ....................................... 13
Show Control Operation ......................................................... 14
Optional Timer/ Duration Remote Operations ...................... 14
Timer/ Duration Remote LED Indicator .................................... 14
DMX Operation ........................................................................ 15
Maintenance ............................................................................. 15
Exterior ................................................................................... 15
Heat Exchanger ...................................................................... 15
Recommended Fluid ................................................................ 15
Maintenance Fluid .................................................................. 15
Warranty ................................................................................... 16
Contact Information ................................................................ 16
Note: Please read entire manual before operating the Power Fogger Industrial
www.ultratecfx.com
2
Introduction
The Power Fogger Industrial is a Microprocessor Controlled, Water Based Fog generating system.
Microprocessor Control
The PFI features dual microprocessor control. From temperature regulation to taper back ow control, all of the
functions are monitored and processed by the two on-board processors.
Water Base Fog Technology
Water Base Fog technology is achieved by pumping a glycol/water mixture through a heat exchanger. This will
vaporize the uid as it passes through the hot unit. The vaporization of the uid forces the hot mixture through
the output nozzle. When mixed with ambient air, it forms an opaque aerosol (fog). The fog is made up of tiny
droplets that form around small particles in the air. The suspended droplets refract the light, allowing the fog to
take on the color of the light illuminating it.
Warning
Important Safety Instructions:
1. Do not touch, place hands or expose skin within 20” (50 cm) of the discharge nozzle.
2. Do not remove the outer case.
3. Persons suffering from asthma or allergenic sensitivity may experience irritation, discomfort or allergic
symptoms when exposed to fog effects.
4. Ensure that this unit is grounded at all times. Failure to do so may result in serious injury.
5. Use Ultratec Special Effects uid ON LY.
Safety Precautions
1. Ensure that any operation of the machine is supervised by suitably trained and authorized personnel.
2. Do not modify the machine or use a machine which has been damaged in any way.
3. Allow sufcient air circulation around the machine at all times.
4. Protect the machine from direct weather effects and wet locations.
5. Only use uids manufactured by Ultratec Special Effects.
6. Do not continue to produce fog when visibility is reduced to 20” 50cm or below.
7. Avoid directing fog output continuously at people, structures or objects within close proximity of the discharge
nozzle.
8. Ensure that adequate exhausting arrangements are available in the event of an emergency.
9. Do not place hands or exposed skin within the rst 20” (50 cm) of the discharge nozzle at any time during fog
production.
10. Fog effects can trigger smoke alarms and detectors. Please take suitable precautions to prevent false alarms.
11. Ensure sufcient air exchange vs. CO2 released.
www.ultratecfx.com
3
PFI Technical Specications
Model: PFI/PFI-9D
Part Number: PFI
CLF 4450 / 120 volt
CLF 4451 / 220-240 volt
PFI-9D
CLF 4460 / 110 volt
CLF 4461 / 220-240 volt
Power Rating: 120 Volt A.C. 50/60 Hz. 13 Amps.
240 Volt A.C. 50/60 Hz. 6.5 Amps.
Fluid: Water Base Fog Fluid (Use only Ultratec Fluid)
PFI Technical Drawings
Power Fogger Industrial
www.ultratecfx.com
4
Power Fogger Industrial 9D
www.ultratecfx.com
5