Ultratec Bubble Fluid Supreme User Manual

Product Identifier

SDS No.

Product Family

Emergency Phone No.

SECTION 1. IDENTIFICATION

Supplier Identifier

Date of Preparation

Bubble Fluid Supreme

Label Elements

SECTION 2. HAZARD IDENTIFICATION

Not applicable

Classification

Not classified under any hazard class.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name CAS No. Other Identifiers%

Anionic/Non-ionic Surfactant Blend N/A 1-5

Inhalation

Get medical advice or attention if you feel unwell or are concerned.

Eye Contact

Immediately flush eye(s) with plenty of water. If eye irritation persists, get medical advice or attention.

Ingestion

Do not induce vomiting. Rinse mouth with water. Get medical advice or attention if you feel unwell or are
concerned.

First-aid Comments

Get medical advice or attention if you feel unwell or are concerned.

SECTION 4. FIRST-AID MEASURES

First-aid Measures

Extinguishing Media

Suitable Extinguishing Media

Not combustible. Use extinguishing agents compatible with product and suitable for surrounding fire.

Special Protective Equipment and Precautions for Fire-fighters

No special precautions are necessary.

SECTION 5. FIRE-FIGHTING MEASURES

SDS No.:
Date of Preparation:

0195 Page

of

0401

November 03, 2016

Product Identifier: Bubble Fluid Supreme

Special Effects
Ultratec Special Effects, 1960 Blue Heron Drive, London, ON, N6H 5L9, 519-951-3352

1-800-255-3924 (ChemTel)

0195
November 03, 2016

Safety Data Sheet

Bubble Fluid Supreme

Personal Precautions, Protective Equipment, and Emergency Procedures

Use the personal protective equipment recommended in Section 8 of this safety data sheet.

Environmental Precautions

It is good practice to prevent releases into the environment.

Methods and Materials for Containment and Cleaning Up

Stop or reduce leak if safe to do so. Contain and soak up spill with absorbent that does not react with spilled product.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Precautions for Safe Handling

No special precautions are necessary.

Conditions for Safe Storage

Separate from incompatible materials (see Section 10: Stability and Reactivity).

SECTION 7. HANDLING AND STORAGE

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Appropriate Engineering Controls

Individual Protection Measures

Skin Protection

Respiratory Protection

Eye/Face Protection

Not normally required if product is used as directed.

Not required, if used as directed.
Wear chemical protective clothing e.g. gloves, aprons, boots.

Not required but it is good practice to wear safety glasses or chemical safety goggles.

General ventilation is usually adequate.

pH 7.0 - 7.5

Appearance Clear colourless viscous liquid.

Initial Boiling Point/Range 100 ºC (212 ºF)
Evaporation Rate Not available
Relative Density (water = 1) 1.0
Solubility Soluble in water

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Viscosity Not available (kinematic)

Basic Physical and Chemical Properties

Chemical Stability

Normally stable.

Conditions to Avoid

Prolonged exposure to high temperatures. Contamination.

Incompatible Materials

Strong oxidizing agents (e.g. perchloric acid).

SECTION 10. STABILITY AND REACTIVITY

Reactivity

Not reactive.

SDS No.:
Date of Preparation:

0195 Page

of

0402

November 03, 2016

Product Identifier: Bubble Fluid Supreme