Ultra Start 3250 SERIES Owner's Manual

Owner’s Guide

Start Fault Indicator

If the Key Icon in the remote’s program menu is flashing, the remote starter has been
disabled. This can be because of various inputs including hood open, brake active,
tach lockout or system in valet mode.
When the remote start button is pressed in this mode, the remote will respond by
giving 3 beeps and flashing the Key Icon in the program window. The Key Icon on the
top of the display will not be illuminated.

The vehicle’s start fault condition must be corrected in order to remote start.

WARRANTY

3 Year Warranty Available on Certain Products - See Dealer For Details.

The manufacturer warrants to the original purchaser of their remote starters and alarms, that the product
shall be free from defects in material and workmanship. However, should this product be proven to be
defective, within a two year period from the original date of purchase, the manufacturer will, without charge
to the purchaser (excluding any charges incurred to have the product delivered to the manufacturer) , repair
or replace any part of the remote starter and/or alarm which the manufacturer agrees to be defective. All
warranties apply on to the original purchaser and the vehicle in which it is originally installed. Repairs or
replacement of defective modules shall remain at the discretion of the manufacturer. All other parts,
components, accessories and/or optional equipment pertaining to the remote starter and alarm are not
included in the manufacturer’s warranty. This warranty is non-transferable. Request for warranty service
from any Factory Authorized Dealer must be accompanied with the original purchase receipt or have
product registered by authorized dealer on manufacturer’s website. Failure to comply with any of
these conditions may result in warranty being voided.

This warranty does not cover the following: removal and reinstall labour charges, shipping charges, abuse,
misuse, or accidental damages to the remote starter and alarm, automobile, and/or parts there of. This
warranty is void upon modification, repairs, or alterations of any part of the System. The manufacturer does
not guarantee or insure against theft of the vehicle or its contents. Alarm models are designed only to act as
a deterrent against possible theft. This alarm may qualify for auto insurance discounts, contact your
Insurance Agent for further information . The manufacturer shall not be held liable for any consequential
damages due to breach of this or any other warranty, expressed, or implied. This warranty gives you
specific legal rights. Y our specific legal rights may vary for each region.

CERTAIN DAMAGES EXCLUDED - The manufacturer expressly disclaims any liability or responsibility
for incidental damages caused by the product, including economic loss, loss of use of the product, car
rentals, or any other costs relating to the care and custody of the product. The manufacturer disclaims
liability or responsibility for any consequential damages caused by the product or resulting from its use,
including the cost of repairing or replacing other property damaged by the product or caused by its use,
whether or not the product is working properly. The product is intended to deter unauthorized use of the
vehicles in which it is installed. The manufacturer does not warrant that the product is fool-safe against theft
and/or vandalism and/or human error or misuse. The manufacturer accepts no liability or responsibility for
any damage of any kind whatsoever caused to any vehicle in which the product is installed or any resulting
damage from its use. The manufacturer accepts no responsibility or liability for any damage resulting to or
theft of the vehicle or its contents, caused or alleged to be caused, directly or indirectly, by failure of the
product.

OWNERS GUIDE

Advanced 2-Way
Remote Vehicle Starter

AUTOMATIC AND MANUAL
TRANSMISSION MODELS

WWW.ULTRASTARTERS.COM

See website for a full size printable version of this manual.

TECH SUPPORT

Western Canada 1 800 279-0636
United States: 1 866 698-5872
Eastern Canada Bilingual: 1 800 268-0683
E-Mail Tech Support: [e-mail]
Check Our Web Site: www.ultrastarters.com

3250

3250

3250M

3250M

This device complies with Part 15 of the FCC rules. Operation is
subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
part responsible for compliance void the user’s authority to operate this
devise.

FCC/ID Notice

Owner’s Guide

Owner’s Guide

Lock Doors

1. Press and release button #1 on the remote transmitter.

2. The park lights will flash and the horn (optional) will honk one time.

3. The remote will beep once to confirm.

4. The doors will lock.

5. The LOCK icon will appear on the LCD display of the remote.

4. The LED’s on the antenna will start flashing within five seconds.

Unlock Doors

1. Press and release button #1 on the remote transmitter.

2. The park lights will flash 2 times and the horn (optional) will honk 2 times.

3. The remote will beep twice to confirm.

4. The doors will unlock.

5. The UNLOCK icon will appear on the LCD display of the remote

4. The LED’s on the antenna will stop flashing within five seconds.

Trunk Release

1. Press and hold the Trunk Release Button ( Button #2) for three seconds.

2. The doors will unlock and the trunk release will then activate. The Trunk Release will then be
confirmed by 2 park light flashes.

3. The remote will beep once then beep twice to confirm the Trunk Release was activated. The Trunk
Release Icon will appear at the top of the LCD screen for five seconds.

4. For safety reasons, the Trunk Release output will be disabled and will not activate when the ignition
key is in the on position.

Car Finder Mode

1. Press and hold buttons #2 & #3 together for two seconds.

2. The system will flash the park lights and honk the horn(optional) five times.

3. The remote will beep and display the systems current status.

Panic Mode

ACTIVATE PANIC MODE

1. Press and hold Button #1 for three seconds.

2. The park light will begin to flash and the horn will start to honk.

PANIC MODE DISABLE

- Press and release Button #1 to disable Panic Mode and lock the doors.

- Press and release Button #1 to disable Panic Mode and unlock the doors.

Note : Panic Mode will stay activated until disable by the remote transmitter.

Remote Start

1. Press and release Button #3 on the remote transmitter.

2. The Park lights will flash and the horn(optional) will honk one time.

3. The remote will beep 3 times and the key icon will begin flashing on the top of the LCD screen.

4. When the vehicle has started, the system will flash the park lights four times then remain “On” while
the vehicle is running. (Normally 15minutes)

5. The Runtime Bar Graph will appear on the LCD screen and begin counting down.

6. The vehicle will continue to run for the programmed runtime. (Normally 15 minutes).

Reservation Mode (Manual Transmissions Only)

TO INSURE SAFE STARTING OF MANUAL TRANSMISSION VEHICLES

1. While the vehicle is running, apply the Park Brake then press & release the Brake Pedal.

2. The park lights will flash to confirm that reservation mode has been activated.

3. Remove the key from ignition (The vehicle will continue to run) exit the vehicle and close the door.

4. The vehicle will shut off when the door is closed. (If the vehicle has a delay dome-light, it may continue

to run until the dome-light turns off)

5. The system is now in Reservation Mode and can be safely Remote Started.

Note: Opening the door after this point will cancel the Reservation Mode*.

*To re-enter the vehicle without cancelling the Reservation Mode. Remote Start the vehicle and unlock
the door’s by the remote, (The unlock icon will appear) then open the door. When done, close the door
and press Button #1 on the remote (the system will arm) then press and hold button #3 for three seconds
(The vehicle will turn Off).

Extended Run Time

1. Press and release Button #3 while the vehicle is running under the remote starter.

2. The park lights will flash and the horn (optional) will honk to confirm the runtime has been extended.
The system will reset the runtime (normally 15 minutes).

Note: The Runtime Bar Graph is not updated by the activation of the Extended Runtime.

Remote Stop

1. Press and hold Button #3 for three seconds. The remote starter will shut down.

2. The park lights will flash two times and the horn(optional) will honk two times.

Note: Pressing the brake pedal or opening hood will also stop the vehicle.

Idle Mode

1. Press and release Button #1 while the vehicle is running by the ignition key..

2. The park lights will turn on and the horn(optional) will honk once.

3. The Remote will beep and the Run Time Bar Graph will light up.

4. Turn the ignition key “off” and the vehicle will continue to run.

5. Exit the vehicle and leave it running safely without the keys in the ignition.

Note: Always lock the doors when leaving the vehicle unattended.