Ultrasource SR-2 Turbo Specifications

SR-2 TURBO DICER/SLICER
simple controls, enhanced ergonomics,
superior cleanability
and the world’s most advanced,
pulsating pre-forward system.
Cutting tool
changeover in
Thorough washdown
10 seconds
3 minutes
Koch Equipment LLC 1414 West 29th Street
Kansas City, MO 64108-3604 USA
800-777-5624
Telephone: (816) 753-2150
Fax: (816) 753-4976
E-mail: info@kochequipment.com
Internet: kochequipment.com
© Copyright 2008 Koch Equipment LLC
Great for:
• Beef for Stew
• Boneless Ham
• Raw or Cooked Product
• Poultry (Chicken Breast)
• Vegetables
• Cheese Cubes
SR-2 TURBO DICER/SLICER
SR-2 Turbo Equipment
• Serrated knives
• Angle shaft
• Toolbox
• Computer panel
• Mechanical pressure system
• Lift for product containers
• Pressure sensitive pre-compacting
• Multiplex grid on roller bearings
• Infinite adjustment of forward feed 1-32
• Pre-compacting from the sides
• Stabilizers for source material
SR-2 Turbo Accessories
• Retaining claw plunger for portioning
• Sectioning blade for bones
• Plunger for waste pieces
• Blade sharpener in the toolbox
• Cheese grids in different sizes
• Standard carriage feed system
Technical Data SR-2 Turbo
Dimensions 61”l x 55”w x 51”h
Weight of Dicer 1,540 pounds
Horsepower 5 hp
Fuse Protection 16 Amps
Product Chamber Dimensions 4.7”l x 4.7”w x 19.7”h
Product Length .04” to 1.26”
Cuts per Minute 160/320
Product Temperature 28º F to 150º F
Product Output (1/4” cubes) 2,200 pounds
Standard Grid Sizes 5, 10, 20, 40, 60 and
6, 12, 24, 60 and
8, 16, 32, 60
Can be combined
Special Grid Sizes Can be supplied
Note: 1 inch = 25.4 mm (2.54 cm)
Loading...